I am currently working on a project that has a splashscreen This splash screen is designed to be shown when the main form begins to load its requirements, and then closes once it has loaded... Currently it works like so:
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
frmSplash.Show()
dolotsofloading()
frmSplash.Close()
End Sub
[Code]...
I have form1 and form2. A button on Form1 calls a thread background process (below). That process processes the command and when its done should close form2. I'm opening form2 within the current thread but trying to close it in the background thread. This is because if i close it in the current thread it closes immediately. I included the 2 functions below and what I have tried in the inline comments. Form2 is a simple form, basically just an animated gif. It is to show the user that something is happening(like a status bar) then close when its complete. I tried running different priorities instead of different threads but due to the results threading seems to behave the best. I'd like to keep access to both forms during the process, the pc, and screen refreshes realtime.[code]
View 2 Replies1. I am closing the form which started the thread inside the thread. There are no errors , but Is it safe ?
2. The thread starts at click of a button . If same button is clicked again , the thread is aborted. Should the thread be made Background or foreground ? it is working either way.
my code :
Private Sub BtnOk_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BtnOk.Click
m_Thread = New System.Threading.Thread(AddressOf MyFunction)
m_Thread.IsBackground = True
[code]....
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
I have a simple form in VB.NET with one button which when clicked opens an Outlook Explorer to display an Outlook Calendar. When the user closes the Explorer, the form picks up the close event, garbage collects the Outlook objects and attempts to close itself.
However the Me.Close() does not work - if I pause the code on the Me.Close line and set a watch on the Me form object, lots of the form properties say "{"Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on."}System.InvalidOperationException" If someone could help me out with this one I would be a very happy bunny...
[Code]....
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
In the main form the user can choose to download information from a device.Since this request takes time, when "download information" is pressed I open new form in a separate thread: Private Sub RunDownload()
[Code]...
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
In my program I have a thread in the background that runs an infinite while loop. If I want to terminate the thread, I break the while loop, and the thread runs to a stop. However, if close the form without stopping the thread, it just keeps running. I tried both aborting the thread and exiting the while loop in the closing form method, but without succes.
View 1 RepliesI seem to have a problem in finding a solution to threads.I am opening a .PDF file via an <iframe> using vb.net. Then the file is opened, it is then moved to another location. But for some reason I am unable to move the file because it "The process cannot access the file because it is being used by another process." The only way round it i have found is to kill the process for Adobe Acrobat, so the file is released. Even if i fill the iframe with something else.How would I close the file, and stop that particular file from being accessed before the move ?
View 6 RepliesWhen i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 RepliesI'm creating a Client Server application which involves theServer running some scripts in clients and getting back results in an automated way. In Server, other than Main thread, i have 2 worker threads, a) one monitoring response from clients and b) the other scheduling next available job to respective client which executes that job. The issue here is ,I want these worker threads to write the status of their work in the UI(which comes under Main Thread). Also i need to write things in worker thread in a Data table and Rich Text Box in Main thread. But, I can't do so, since it has been blocked to access one thread's function or property directly from others. Is there any work around to do this?
View 8 RepliesPreface: I know this is an unusual/improper way to do this. I can do this with a "real" ShowDialog(), background worker/thread, and so on. I am trying to do specifically what I describe here, even if it is ugly. If this is impossible for X reason, I have created a fancy progress dialog for some of our long running operations. I need to have this dialog shown on a new thread while having processing continue on the calling (UI in most cases) thread.
[Code]...
I need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:
Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub
and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
I am trying to call a method that started on a background thread on the UI thread calling BeginInvoke and passing in a delegate as follows:
Dispatcher.BeginInvoke(Function() UpdateApplicationDataUI())
to call this method:
Private Sub UpdateApplicationDataUI()
...
End Sub
However, I get an error in the call to BeginInvoke (the UpdateApplicationDataUI portion of the delegate is stating "Expression does not produce a value").
Me.Dispatcher.BeginInvoke(Function() New Action(AddressOf UpdateApplicationDataUI))
A BackgroundWorker thread can pass data to the primary thread. It does it via the RunWorkerCompleted and ProgressChanged events, which I believe run in the primary thread. I would like to encapsulate the BackgroundWorker control in a class so that I can instantiate it more than once. But I don't know how the BGW can then communicate with the primary thread. If the BGW control is within a class, it does not have access to the properties outside the class. In that case, how can the BGW pass data to the thread that instantiated it?
[Code]....
I'm getting the following error:"Current thread must be set to single thread apartment sta mode before ole calls can be made"
I am using Speech.Recognition.SpeechRecognizer and using it to open various dialog boxes. It works fine for the first few but on the third one when it calls the InitializeComponent in the Dialog's New, it throws the above error.
Anybody have any clue what causes this or how to fix it? The SpeechRecognizer seems to run on its own thread, so that seems to be at the root of the problem. If I open thedialog with a button click I don't get an error.
[Code]...
I am in a trouble with this error:"An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss." I am not sure if the RCW-error is related to my problem but I was having this error last January 25. It appears when I am ending my application. I ignored it. The next morning when I resumed coding for my application, the changes I am making does not appear at run-time anymore. Whatever GUI changes I make in my application (at design time), it does not make any effect any longer when I am running the application. What is causing this? I am so afraid if I have to restart my application from the scratch. I have gone far.
View 1 Replies