I've been pulling my hair out on this issue, and I can't find any topics that seem to help on this one.
I have a 3rd party unmanaged C++ DLL function which takes a string (char *) as one of its parameters then modifies that string internally.[code]...
I have a 3rd party unmanaged C++ DLL function which takes a string (char *) as one of its parameters then modifies that string internally.[code]...
Currently this code runs without exception, but desc shows 40 spaces when displayed to the messagebox. I've tried StringBuilders, but they don't seem to work. I've also tried changing the 2nd parameter to be ByRef but this causes a read/write memory exception.
Just started VB programming this week and have found a wealth of information about what I'm trying to do. Problem is, some of it is more complete than others.Here's what I'm trying to do:In Form1 (my main form), I want to instantiate a class that contains a couple of properties (speed setpoint and position setpoint). When I click a button, I want to pass this data to Form2 and populate two textboxes on Form2 with the properties of this object. I want to manipulate the property values on Form2 and click an OK button which closes the dialog and returns the manipulated data, updating the property values of the object. Here's the algorithm I'm following:1) On Form1, instantiate the class2) On Form1's "Pass Data" button click event handler, instantiate a Form2 object and invoke the ShowDialog method, passing the object as a parameter.
3) On Form2, overload the ShowDialog method to accept the object as a parameter and modify the method so that it returns the manipulated class data.4) On Form2, in the ShowDialog method, populate the textboxes with the class data that was passed in.Here's where I get stuck. If I press the OK button on Form2 (DialogResult.OK), it returns me to Form1, but what hook do I have in Form1 to receive the manipulated class data that the ShowDialog method is returning?Here's an example of what I'm thinking about:
Code:
Public Class Form1
Dim clsController1 As New MotionController
[code].....
I'm sure it's probably a very elementary question, but every explanation I've found seems to be incomplete.
I need to pass 2 strings from VB.NET to an OCX written for VB6. VS2008 put a wrapper on the OCX, but while the routine is called, the string parameters are not correctly received.
I do not know why but I am guessing that it is because, as I understand it, in VB6 parameters are passed By Ref as a default while in VB.NET, parameters are passed Bv Val as a default.
When I imported the OCX into VS 2008, it seems to have automatically defaulted the string parameters for the routine I need to By Val because the ocx export info did not specify anything.
Is there anyway to override VS 2008 so that I can pass the strings correctly to the OCX? Is there something else instead that I could do?
I have 30000 files encrypted with FastEncrypt by JSoft, which seems to have gone out of business, and I need to incorporate FastEncrypt into a VB.NET program in order to use them.
I have the following [code]...
I thought make this would make my ada.myString have "working!" on the main appdomain, but it doesn't. I thought that by inhering from MarshalByRefObject any changes made on the 2nd appdomain would reflect also in the original one(I thought this would be just a proxy to the real object on the main appdomain!)?
What's the simplest way to pass a variable back and forth between 2 forms?Let's say I have form1 and form2. Form2 has textbox2 and button2. When button2 is pressed I need the text in textbox2 to display in textbox1 on form1.
View 4 RepliesI have situation where I have to retrieve different fields from Access Database and put into one RichTextBox but they have to be displayed as DIFFERENT font types/colors.
I am able to get the database field data into RichTextBox but not able to set font styles or font colors. They are displayed in default font style. Please help me with sample code by giving example, i.e., taking two to three different string types and sending them to RichTextBox with different font color and styles.
Can I pass parameters back and forth between a Windows Service and .NET program? For ex: I want to pass a compressed/encrypted byte paramater to the Windows Service, who then decompress/decrypt it and return back the decompressed/decrypted bytes.
View 1 RepliesI have an MVC application where all the data is tied together by VisitDate table in my database. The home page is a strongly typed view of type VisitDate, all it does is pull up some simple data. Now, here's where I'm having a problem. I need a link that passes the current model in the view back to a separate controller action so I can render a different page with different data. Here are my two controller actions. I'm going from News.aspx to FrontPage.aspx and hopefully passing SchoolVisit. [Code]
View 2 RepliesTrying to find some code to assist with accessing a web service. I am a newbie when it comes to web services and don't quite get the whole how to submit the request and then read the results. I know from searches that people request a copy of the WSDL file so I have attached (SystemManagementService.wsdl)
[Code]...
I am in the process of prototyping a small sockets application, which monitors IT infrastructure (due to in-house financial and deployment restrictions, I am unable to utilise an existing commercial or open-source solution). Basically, I have a server application and associated agent process for communicating heart-beat data to the server. The server application implements a TCP socket class (TCPDevice), which is called from a WinForm. I am aware of the restriction on updating the UI from processes running on separate threads, and that the preferred technique for acheiving this is via the use of Delegates in conjunction with the Invoke method. Having had very little need previously for using Delegates (apart from of course std windows events and the BackGroundWorker control), I am at a loss as to how to do this in the context of my application, and would appreciate some assistance, although it has occurred to me that I could use the backgroundworker for marshalling updates to the UI.
Eventually the application will need to update a grid of devices via feeds from the defined agents, however for the purpose of this exercise simply updating a status bar on the UI will suffice. The section of the code which I believe is relevant to propogating the code to the form is contained in the OnDataReceived method.Below is a code excerpt from the protoype app which should put the above into appropriate context:
Code from the form:
[code]...
I need to open up a cmd prompt, then run a file called adb.exe which opens a shell to communicate with my android cell phone...
Heres what I need:
My Form1
Label1.Text = "adb.exe shell"
Label2.Text = "su"
Label3.Text = "mkdir /etc/folder"
[Code]....
Heres the problem... I can execute any normal dos command automaticly, but once i open the ssh prompt (adb.exe shell), i dont know how to keep putting commands in there...
The commands are stored in strings, and i need to take the commands from the strings, and type them into the command prompt like above.
I have a popup aspx page that receives data from a parent page gridview Edit click. There is a great deal of parsing of data from parent page to pop up as the data is being translated in pop up, then sent back to parent page to be reassembled in the original text block before update.
When the popup passes the data back or is canceled, the parent page gridview is still in Edit mode.I would like to pass the Cancel or Update button click from the popup to the parent page gridview so it can complete the update or cancel event without asking the user to click the corresponding command button link from the gridview edit mode, to Update or Cancel.
UPDATE: There is also a jquery UIBlocker on the Parent page to prevent the user from returning to the page until the PopUp page processing has been completed. Below is the critical code:
PARENT Page:
function parentFunc(a) {
// Unblocks on return from popup page.
$.unblockUI({});
[code]...
Had a problem with preventing the popup from reloading. So there is an if condition in the load event. A dynamic number of controls are built on the popup as literals. So the Page Init event and Page Load event fire on non Postback to rebuild the controls.
Say I have a List(Of Tag) with Tag being an object. One member of Tag, Tag.Description, is a string, and I want to make a comma-separated concatenation of the Description members.Is there an easier way to do this than to read the Description members into a List(Of String) and then use the Join function?
View 2 RepliesI have created a class with a function in it. I have a collection of data I want to pass back. I tried an arraylist first. Now I am trying to use a dictionary. My problem is that it creates the dictionary ok, but I am only get the last row of data from my
Function GetWeldAuditInfo(ByVal ResourceId
As
String,
ByVal VendorId
[CODE].........................
I am using an image button and on click of it i want to go to visited page.Now i am using - Response.Redirect(Request.UrlReferrer.ToString()),It is going to previous page, but when i am in a page of some user details where the link is looks like - users.aspx?userid=25 and i visit some other page and click back(image button) i want to see the same userdetail page. How to track that.
View 2 RepliesI have a search page with a couple of pulldowns. Dependig on the values of them I show a grid matching the searched criteria, basically a table with links the user can navigate to. My problem comes when the user wants to navigate back. At the moment I have a "Back" button which simply redirects the user to the initial search page. I think it would be a good improvement to have the values of the pulldowns filled in with the values the user selected, this way when he presses the "Back" button he would not have to restart the whole search process again.
View 5 RepliesI'm not sure what I did, But I would like to get my toolbox back to normal where I can put it back on auto hide and such.
View 3 RepliesI am working on a UDP Client/Server, and currently i have them sending back and forth strings, which i convert to bytes, and then open the bytes to read. I want to now send an Object instead of those strings, which includes multiple unsigned integers and strings.
View 39 RepliesWe have a server application and a client application that communicates with each other using socket.
When the server application sends 2 messages about 16-31 ms apart, the 1st message is received by the client application with little delay (like 16-32 ms after it was sent). But the 2nd message is received by the client application a lot later (like 200 ms later) than when it was sent.
We already disabled Nagle algorithm (set NoDelay = True) in the socket in both the server and client application.
We are having problems with sending back to back emails on one of our web sites. The site is built with .net framework 2.0.We can send the first email without any problems on every try. But to send a second email you need to wait about 20-30 minutes.the problem.One thing we tried was changing the smtp email server. We tried a third party smtp server but the same problem persisted. So I think the problem is not with the smtp server but with our .net code.
Imports Microsoft.VisualBasic
Imports System.Net
Imports System.Net.Mail
[code].....
I have a list of strings. For each string in that list, I want to prepend another string. I wrote a method to do it, but I was wondering if there was something already in .NET I could use to do this. It seems like something that could be built in, but I was not able to find anything.
Here is the method I wrote:
Private Function PrependToAllInList(ByRef inputList As List(Of String), ByRef prependString As String) As List(Of String)
Dim returnList As List(Of String) = New List(Of String)
For Each inputString As String In inputList
returnList.Add(String.Format("{0}{1}", prependString, inputString))
[code].....
It works, but I would rather use built in functions whenever possible.
I'm migrating from VB6 to VB.NET, in hence my questions below:
I have to write a function that returns array of strings.
How can I initiate it to empty array? I need it since I have to check if it's empty array after it returns from this function.
Is list of arrays better for this purpose? If I use a list - Is it empty when it firstly defined? How can I check it it's empty?
I have two tables:
table1
case_no flow result
tc_1 001 pass
tc_1 002 pass
tc_1 003 pass
tc_2 001 pass
tc_2 002 fail
tc_2 003 pass
table2"
case_no result
tc_1 pass
tc_2 fail
Table2 should be updates from table based on the results... If all results is PASS then the table2 should be updated as pass... if any result is FAIL then the entire case_no should be updates a s fail..
This code was working consistently, but now...This code works on the first pass.Then second pass it just hangs on Code:Dim tcpClient As TcpClient = tcpListener.AcceptTcpClient() for about 2 minutesThen the code will fork for another pass, then fail.....
Code:Imports SystemImports System.TextImports System.Collections.GenericImports System.XmlImports System.Xml.LinqImports System.Net.Sockets
[CODE]....
I am creating an application that will be faced with multiple decisions to make and I want to know if it is possible to create around 20 if statements to excute or decide between before excuting?
The application will encounter multiple websites but each website will have the same elements but not neccessary in the same order so I was going to tell the app to loop through the IF statement and if the condition is met to run that sub routine where it starts over and loops through the IF statements until next condition is met.
Is this possible in VB.NET or is 20 or so IF statements to many to use at once?[code]...
I have a dBase file named PROBA, with two cells: "VNEV", "KNEV".I would like to see the records back-to-back in a Msgbox.
Imports System.Data
Imports System.Data.Odbc
Public Class FormCount1
Public Sub Recordszm() Handles MyBase.Load
'TODO: This line of code loads data into the 'DataSet1.PROBA' table. You can move, or remove it, as needed.
[Code]...
I have been looking for examples to find the string between two strings. This top one works fine;
Public Sub ReadData(ByRef keywordStart As String, ByRef keywordEnd As String, ByVal filename As String)
Using reader = New StreamReader(filename)
[Code].....
Now the first one is fine - Ext_Volume is result of the string between the strings <Volume> and </Volume>. <Volume> and </Volume> are unique so this is straight forward.
However the second one - "^FDExp:" is unique, but "^FS" is not unique. There are occurances of "^FS" before and after "^FDExp:".
How do I get the string to search AFTER the occurrence, not before etc?
Dim str As String
Dim str2 As Array
str = "blabla duhduh"
str2 = str.Split(" ")
Say the string is something like
bla bla bla bla (cat) bladfdskdfd dsgdsdksf (dog)
dfdshfdskdskfsdfkhsdf sdkfhdsfkdf (kathy) fdsfhdskfhdsfkd (doggy)
I want a generic.list (of string) containing
cat
dog
kathy
doggy
How to do that with regular expression in vb.net
Later I want to do something more complicated like getting all strings between "url":" and ", from this strings
[Code].....