Pasting From Clipboard Into Introduction Section Of Email In MS Word 2003?
Jul 19, 2009
I have a form to email every day that compiles from a VB script I wrote in MS Word 2003. Each day I have text that I need to place in the Introduction area in the email. I usually do this manually by copying the text then pasting it into the Introduction box since the text is usually just snippets of emails and have no common pattern. I would like to have a way to be able to select my text and copy to the clipboard, then run my script and have the contents of the clipboard pasted into the Introduction by the script so the email can then be sent.
Everything works perfectly if I place static text for the Introduction. I just need a way to be able to place the contents of the clipboard into the Introduction.
There is Bitmap data on the clipboard from a screen capture. If I paste it into a RichTextBox it works OK. That is, if I remove the first two lines below.
Dim clipboardDataO As DataObject = CType(Clipboard.GetDataObject(), DataObject) Clipboard.SetDataObject(clipboardDataO) RichTextBoxTxt.Paste(DataFormats.GetFormat(DataFormats.Bitmap))
However, If I capture the clipboard data and restore it before I paste I no longer get my bitmap displayed in the box. My problem is, in the real situation I need to use the clipboard before I paste which is why I save it and restore it above.
1) Do you know why restoring doesn't appear to work here? 2) I can't paste before the save/restore. Is there something else I can do?
I'm trying to use an image as the fill in a series in a bubble graphic. I know we can set what's in the clipboard as the filling of a bubble, but when I try to record the macro nothing happens...
Can anyone tell me what's the code to put an image from the clipboard as the fill from the selected bubble series?
a user copies multiple lines of text (say, from an email) into the clipboard. Based on my observations, when one tries to paste the text into a single-line textbox, only the first line is actually pasted in. (I am aware that the "obvious" solution would be to set the Multiline property to True, but there are reasons I am looking to avoid this and to put multi-line data into a single line.)
In the TextChanged event handler, I wrote code that parses the clipboard data to successfully convert it to a single-line, comma-delimited format.
Private Sub txtMassTrackingNo_TextChanged(ByVal sender As Object, ByVal e As System.EventArgs) _ Handles txtMassTrackingNo.TextChanged
My system has Office2007. And i use VB.Net to automate word. Everything works fine. But when tried to save in Word2003 format(.doc), it is not working. But the saved document is readable in Word2007.
Dim WordApp As Microsoft.Office.Interop.Word.Application = New Microsoft.Office.Interop.Word.Application() Dim MyDoc As Microsoft.Office.Interop.Word.Document
What I would like to do is create a command button that launches an email from outlook attaching the current word document to a set email address. I'm not fussed if the word document is saved or not as it is only the email receipent that needs it, likewise I don't mind if the code instructs the email to send of just opens it ready to be sent.I have read through loads of forums and tried loads of codes but cannot get any to work.
I am struggling with changing the Page Orientation of a WORD document I am creating programatically using VB.NET 2005.I need to change the orientation from Portrait to Landscape after the first page of the WORD document is created.I create a WORD document (2007) successfully and then begin to populate the WORD document with report information (taken from reading a text file and writing some if it to the WORD document)...I am using COM Microsoft WORD 12.0 Object Library....After the first page, the document needs to be changed from a PORTRAIT orientation to LANDSCAPE orientation.Since my application is generating several WORD documents from this one text file, it needs to be done programatically.provide assistance with small example of (writing text to word...page break...change orientation to landscape)?
I have been perusing the internet in search of the best way to accomplish this, but have had no luck. If someone here has experience with Office add-ins, I'm not asking for a solution by any means, just assistance with which direction to take. The software I'm working on is primarily in VB.Net and C#; IDE is VS2008 Here's my scenario:
I am using VBNET3.5 and Microsoft WORD 2003 to display .bmp file on Word Document and it's working When click on his btnCloseWordtry button to close the WORD Doc it is not working
I'm trying to open a word 2003 document, but I get an error that says 'Application' is not a member of 'WindowsApplicaion1.Form1'. Below is the code that I'm trying to use.
It's not a coding problem. I can't seem to copy my coding in to word without it losing all of the colour. Is there any easy way that I can copy and paste this code in to word without it losing all of the formatting?
How can I save or convert a word 2003 file to PDF format?Is there a way that i can save a doc file to PDF format through vb.net?I try to use : "office.Word.WdSaveFormat.wdFormatPDF" but didn't work.
I'm converting a VB6 app (that works fine) to VB.Net app for work using Visual Studio 2008 Express. I have Word 2003 SP3 on my laptop. I need to open an existing Word document; edit it; and save the changes. Now in VB.Net, when I try to do 'Imports Microsoft.Office.Interop.Word', only Microsoft.Office.Core shows up as a choice. I have Microsoft Office 11.0 Object Libary referenced. I've been searching the internet for hours but can't find any thing that helps. Can anyone here point out what I'm doing wrong? How do I get ...Interop.Word to show up as a choice?
I have created a custom formatting toolbar in Word 2003 (styles for headings, bullets etc) and would like to add the built-in commands for font and font size. I am having difficulty with the VBA code.
I would like to know if it is possible to have dynamic data in word (2003) documents. Let me explain, I will start with what we do now and how I would like to fix or change it.We have approx 35 , we will call them divisions for the time being, and each division has a folder on the shared drive. We have approx 700 ,lets call them customers for the time, and each customer has a folder located in the associated division folder on the shared Drive. (\DriveDivision#1Customer#1...\DriveDivision#32Customer#348 etc etc etc .)There is a MSword2003 document that exists in every Customer Folder that contains data about that customer (including but not limited too.Contacts, Notes, Customer #s etc) We will call this the DeCust.doc file for the time. A lot of the information in these DeCust.doc files can exist in another customers DeCust.doc files such as a contact name and address. One of the problems we run into is that a contact (lets say Smiths Plumbing Service) may send an email to notify of an address change and the person receiving the email will change the contacts address in the DeCust.doc files of the customers that that employee (employee #1) works with but, there are other DeCust.doc files in other customer folders that the address never gets changed in. When a different employee (employee #2) opens a deCust.doc file of a different customer that he/she works with the contact (Smiths Plumbing Service) the address of this deCust.doc: file is wrong (not updated).
I would like to solve this problem. I have already developed a Demo VB/Database application to be used in lieu of the DeCust.doc files but, I have met Way too much resistance in getting people to switch from using individual docs in each customer folder to using a database program. With that being said, I started wondering if there was a way to Link/populate/fill the contact information in these DeCust.Doc files to a central Database or such that when someone changes an address for a contact it is simultaneously changed in all the other DeCust.doc files.
Im having a problem with my program which was coded in VB.net 2005. My pc is windows XP with MS Office 2003. My program works fine for users with 2003 Office but has errors on users with 2000 Office. I was able to downgrade my pc to Office 2000 so my program would reference to MS office 9.0 (2000). This proved to be successful since both 2000 and 2003 users can now print properly. The problem now is my development pc cant create any word.application ...
on this part... Friend mWordObject As Word.Application Dim oWord As New Word.Document mWordObject = CreateObject("Word.Application") '- where error
I want to drag-and-drop a Word Document 2003/2007 control in my form by .NET Framework. Like we do for PDF in the following screenshot. If you see the highlighted text, it is Adobe PDF Reader. I can show the PDF documents in this control in my form.
I'd like to ask if anyone knows how to properly use the clipboard to take information from a rich text box and send it to the clipboard. You see, if I try the following, which is pulling text from a rich text box, named RichTextBox2:
I am unable to read a pasted datagridviewrow object from the clipboard. All I want to do is, when a user has the entire row selected and copied, I would paste that row into the clipboard as a DataObject. That works just fine but when I attempt to read that DataObject (after the user clicks Paste) the DataGridViewRow that's saved in the clipboard always has a value of Nothing. Here's the code I'm using for Copy and Paste.
I'm trying to finish an assignment for my Introduction to Visual Basic class. I have to program an application that will determine if a word entered has consecutive letters in the alphabet as a substring of itself. Three examples are T"HI""RST"Y, AF"GH"ANI"ST"AN, and "STU""DE"NT.This is what I have so far:[code]....
However, it doesn't run properly. It says I'm trying to refer to a location that is out of bounds, although I don't see why.
I am new to Visual Basic. The only programming I have played with thus far is Perl and some Python in script writing for Paint Shop Pro. (if that is acually programming) I found a tutorial on About.com "from the ground up" with a link to download VB 2010 and when I tried to install the vb_web file I got this error:C:usersuserAppDataLocalTempSit24308reboot.ini cannot be opened. I did a computer search and found this file was not in the Temp folder. The install just hung and I could not cancel or retry. I shut down from task manager. When I looked in add emove there was not a Visual Basic listed. I couldn't tell if there were any other files that were added even though VB is not listed. There seems to be more C++ files (which came installed on my laptop) but I'm not sure if there are more of these C++ files.
I have searched for a week and cannot find a tutorial of how to install this program. I see VB 5, VB 6 and VB 2008. I also see a file for Microsoft Web Platform Installer, but it does not say if I need to download and install this file in order to download Visual Basic 2010 Express. I keep going in circles with my searches and always end up back where I started which is at the Visual Basic 2010 Express download page.
