I got a problem about the arraylist function. Now I want to create and return an arraylist with each student ID for populating listboxes.
Public Function StudentIDs() As ArrayList
End Function
To display the student ID in the listbox by calling this function. (I need to read student information from text file. There are 6 student, so the result should be 100,101,102,103,104,105).
I have a Function that returns a struct in VB.NET:
CODE:
Where as in my struct I have two variables:
CODE:
When I try to populate the structure as shown above, I get an a nullvalue exception.
Im just pulling information from SQL and populating textboxes etc.My question is firstly i have an issue because i can figure out how to do it, and secondly is there an easier way of writing this.So my Issue, i wrote a function to connect to SQL and pull information back which is fine it fills DS(Dataset) and then i want to be able to assign the relevant information within the DS to the desired textboxes,
[Code]...
I'm having trouble reading in the file and populating the textboxes accordingly. After loading the file (I think that is) nothing is being populated in any of the textboxes listed below. Basically I'm not sure if the file is being read or not.
If OpenFileDialog2.ShowDialog() = DialogResult.OK Then
If My.Computer.FileSystem.FileExists("path_to_file") Then
Dim ioFile As New System.IO.StreamReader("path_to_file" + "filename")
TextBox1.Text = ioFile.ReadLine() 'Adds the first line
TextBox2.Text = ioFile.ReadLine() 'Adds the second line
TextBox3.Text = ioFile.ReadLine() 'Adds the third line
TextBox4.Text = ioFile.ReadLine() 'Adds the fourth line
TextBox5.Text = ioFile.ReadLine() 'Adds the fifth line
End If
End If
Have a main form with textboxes on it. When the user clicks a hyperlink on that main form it pops up a new form that they drag and drop files to either a listbox or textboxes, that part works fine. All the seperate form is doing is simply grabbing the filename to bring back to the mainform. That is working correctly. What it is then supposed back on the main form is read the files, again the reading part is working fine, based on the read it's supposed to populate the textboxes on the main form. When I have the listbox that the user drops the file into on the main form rather than a seperate form it works fine, form size limitaton and aestetics are why I'm using a seperate form. When I debug it it's working fine, I can't figure out where it's dropping the info because line by line it does everything right and it shows the values in debug correctly, however when the main form regains focus the values do not appear as they would if I loaded the file directly into that main form.
View 1 RepliesI am having trouble with .net again. I have a series of 10 text boxes. I want to be able to populate them from an array and read there values into another array. In vb6 I would create a text box array with 10 text boxes / indices. I could then populate them by txtbox(i).text = arrVal(i) and to reference them arrVal(i) = txtbox(i). I am stumped I can create 10 text boxes on a form if I have to, but I want them somehow tied to each other as they were in vb6.
View 1 RepliesI'm trying to populate textboxes on one form based on a selection on a combobox on another form. All data will be pulling from the same SQL table. I've got the combox to work fine to show the correct data in one of the textboxes by using the lines:
Dim connectionString As String = "Data Source=F03D3S-DEV01; Initial Catalog=dos_track;" _
& "Integrated Security=True"
[Code].....
,but not sure how to get the other textboxes to fill with the correct data (from the same SQL table row) associated with the combobox selection. I've spent SO MUCH time on this trying to figure it out, but am getting nowhere fast...
this is how I set up my data object for a file parser. (
Dim mytable As New List(Of String(,))()
mytable.Add(New String(4, 16) {})
and it loads mytable like this:
mytable(x)(y, i) = sToken(i)
Let me explain the indices, I have a form with a tab control. In mytable,x is the tab number. Each tab has up to 5 groups which is y. Each group has 17 text boxes, i.Each group also has 17 labels.I started looking at Me.controls, and looking at control properties like tabindex for some way to iterate through the textboxes and mytable to load the textboxes.
so I started with:
for x = 0 to 31
msgbox(group1.control(x).text
next x
and I saw how all my objects are not in sequence as it descending halfway through my label controls, then switched to my textboxes, and then seemingly finished randomly. I am at a total loss without the old index property and what I want to do is something like (forgive my syntax)
Form(0).Tab(x).group(y).textbox(i).text = mytable(x)(y, i)
I was thinking of manually setting the tabindex of all textboxes in group1 to sequential order to try something like:
group1.component.tabindex(i).text = mytable(x)(y, i)
To me this is fun and challenging, but also very frustrating and makes me miss coding in assembly As I can't seem to find any reference to the tree structure of accessing components indirectly, if that makes sense.
I have a database with table "Customer" that will be the datasource for my form controls. My form has a combobox and various textboxes that need to change based on the selectedvalue in the combobox, cboCustNo. Firstly, I'm try to get the combobox to populate with the customer names on the table but have the value member of the combobox set to their customer numbers (just for ease of indexing). Based on the user's selection I'm trying to have various textboxes show the corresponding data (Address, City, Balance, etc.). The code I have so far is below:
Dim cnnDB As New Data.OleDb.OleDbConnection
Dim cmdSelect As New OleDb.OleDbCommand
Dim rdCustomer As OleDb.OleDbDataReader
Dim CustTable As New DataTable
[Code]....
What I am doing is iterating through all the groups that belong to the top group (Generic reports). Then I take advantage of the GroupPrincipal.GetMembers(True) which will recurse through a given group name. I test to see if the user exits under that group and if true I put the group name in an arraylist.
I use the for each principal in GroupPrincipal.GetMembers to loop through each returned user to see if they exist.
Is there a way to put all the returned users Principal.Name from a given group in GroupPrincipal.GetMembers into an ArrayList? This would allow me to to use Arraylist1.IndexOf to search for user. Which would be much faster then iterating through a returned list using the for each construct.
Sub RetAllMbrs(strUser As String)
Dim oPC As PrincipalContext = GetPrincipalContext() '<- this is function somewhere else in the code
[Code].....
I have a problem in Treading.I have a code like this;[code].....
I want to change ListBox1 with ArrayList. But I couldn't find how to use adding a string to ArrayList in tread.
I have an arraylist (arrFirstArry) which I use to populate another arraylist (arrNoDuplicates) preventing any duplicates from being added. This works fine. What I would also like my code to do is prevent adding any partial values which may exist from being added. i.e. my array is like this
[Code]...
I have two structures Public Structure myResearchData
Public batchName As String
Public arraylistRData As ArrayList
End Structure
Public Structure myResearchSubData
Public researchDescription As String
[Code]...
Cleared MyResearchData.arraylistRData for new data to be put in but it also clears the arraylist inside MyResearchDataAList and didn't old the contents of the arraylist
What I need to do is read an ArrayList in My.Settings and add another ArrayList to it. The first think I'm trying to do is load My.Settings.Records into myArrayList. I'm not quite sure on the proper way to do this. I've tried things such as Dim myArrayList As ArrayList = My.Settings.Records, I'm not sure if I need New and I'm not sure if I need .Clone or .CopyTo.
Then I have another ArrayList myArrayList2. To get this into myArrayList I've done: [Code] Then to save it back to My.Settings I've done. My.Settings.Records = myArrayList. The problem is I keep on getting Object reference not set to an instance of an object error on the AddRange line. My.Settings.Records is definitely an ArrayList and it will sometimes = Nothing. The objects will only ever be strings.
I want to create an array of an array (or arraylist of an arraylist) to hold strings.I want to fill an array1 with string values Then add this array to array2. - but only taking up 1 row in array2 e.g something like array2(index)=array1 Then clear array1 then loop through this again with different data, and add it to the array2.so will end up with something like
array2(0)... contains a collection of array1 data
array2(1)... contains a collection of different array1 data
.. and so on
i think i need to make new instances of array1 each loop, but not sure.I dont mind if it uses arrays, or arraylists, or lists, or structure of arrayslists?
s there a difference between the arraylist in visual basic and arraylist in C#? I had to convert some C# code to VB and there is a call I make in a third party api that requires me to pass in an arraylist. When I do this in C# it works just fine, but when I do this in VB, I just get back a vaque exception from the api.
[Code]...
The exception I get is very vague and comes from the API. All i get is, "ARException Occured".
On my form, i've got some textboxes and some richtextboxes. I'm using the following code, to search through the text properties of each of the two types of control. see below:-
For Each ctl As Control In Me.Controls
If ctl.Text = "7777" Then
ctl.Text = "found the sevens"
End If
Next
What i'd like to do is isolate the textboxes only, is there a way to do that? I tried this but i got an error:-
For Each box As TextBox In Me.Controls
If box.Text = "7777" Then
box.Text = "Found"
End If
Next
My goal is to, Pull information from a websight's textboxes in IE into my program textboxes. and to later Put changes from into other values on the websight from my program into it. The sight has multiple textboxes, on different frames. within it.I need to keep it as a exsiting open browser instead of making a new one. only gotten as far as finding the open internet explorer window, by useing
[Code]...
I have a Form with 4 Textboxes. The Textboxes are multiline. To write the contents of the 4 textboxes, I did the following.
[Code]...
How do I read to or populate the Textboxes using StreamReader or StringReader or other means?
I am trying to make a little program for fun and I don't know OOP that well. Since this part of the program is going to be large in comparison to everything else, I want to make sure I don't half ass it.
I need,
50 states
each state having multiple schools
each school having multiple players
and each school having 1-4 coaches who may or may not have awards
I only posted a couple classes since I should be able to figure the rest out off of these two. The award class properties will be changed later. How do I make a new coach that has x awards? I am confused with this part. If I did not explain something clearly please let me know, I want to make sure I get this program started off the right way.
Public Class Coach
Public Sub Main()
Dim coach As ArrayList = New ArrayList
' coach.Add(New Coach(1, "Billy", "Bob", 0, 50, ???))
End Sub
[CODE]...
I have a form which the datagridview will be built manually by reading in certain data from a text file (this is because the data in the text file will change periodically)The code is correctly adding the proper amount of rows but it is NOT putting the required values in the cells. Any thoughts?
[Code]...
I am working on a weboage that will display questions and answers (maybe 5 at one time, maybe 7 at another time) returned from a database table. The questions will each be displayed in a div and the related answers displayed in another div. The question will have an icon "Show Answer / Hide Answer"
How can I go about creating a div and then populating it with values from a table?
The general problem is that I can't get the foreign key in one of my child tables to populate the primary key from the parent table. I have a parent table named "ISSUES" and a child table named "ISSDESC". The primary key for ISSUES is ISS_ID which is an autonumber. The foreign key is ISS_ID in the ISSDESC table which is just a number. I'm using MS Access and an OLEDBConnection as the method. I've created the relationship in MS Access and also created the datarelation in the VB.NET code.
[Code]...
in short not populating, below is the code i'm running with but it isn't loading. Newer to Datagridview so I know I'm missing something. The SQL import I've successfully done with a listbox and borrowed some of the code from that.
Public Class Form1
Private Sub gettournies()
Dim sqlconn As New SqlConnection
[Code]....
I have a DataGridView which reads data from a custom (CSLA) list object. The dataset might have 100,000 records, and obviously I don't want to show them all at once because, for one, it would take ages to load.I think it would be nice if I could read the first (for instance) 20 records, and make it so upon scrolling to the end of the list, it reads the next 20 and adds them to the DataGridView.
I have experimented with various ways of doing this, mostly using a custom class inheriting from DataGridView to capture scroll events and raising an event which adds new records. I will include the code below:
Public Class TestDGV
Inherits DataGridView
Public Sub New()
[code]....
Though this (sort of) works, it can be buggy. The biggest problem was that if you used the mouse to scroll the DataGrid, it would get stuck in a loop as it process the scrollbar's ValueChanged event after the data was added. That's why I added ScrollbarOff and ScrollbarOn - I call them before and after getting new records, which disables the scrollbar temporarily.
The problem with that is that after the scrollbar is re-enabled, it doesn't keep track of the current mouse state, so if you hold down the 'Down' button with the mouse (or click on part of the scrollbar) it stops scrolling after it has added the new records, and you have to click it again.
i have a datagridviewcomboboxcolumn that i am trying to populate. i set up the DataSource property using the wizard, there after i selected the DisplayMember from a corresponding drop down of fields from the table set up in the DataSource and then lastly i selected a field to be the ValueMember. problem is when i run my program datagridviewcomboboxcolumn is not populated.there is no drop down at all. what should i do to see my drop down or perhaps i need to set up in code.
View 1 RepliesI have a combobox which populates information from a textfile, however I was wondering if it would be possible to only populate the fourth field? each field in the text file is separated by tab (space).
For example the text file has the following information
orange yellow blue brown green
pink purple green yellow black
red purple pink black neon
green blue purple gold silver
The combobox I want to display brown yellow black gold I have the following coding in place however it shows all fields in the combobox.
[Code]...
I'm having some trouble adding an object to an arraylist.
Basically the object has two properties (file id/name), but I can't figure out how to assign those properties. During runtime it errors out with public member on the object not found.
Private QueueList As New ArrayList
Public Sub Queue(ByVal FileName As String, ByVal FileID As Integer)
Dim QueueObj As New Object
[Code]....
I'd also like to know how I can do a loop on the arraylist and access the two properites on each record.
I am trying to create an arrayList of people. The variables, or arrays are; first name, last name, age, DOB. I am wanting to load all that into one arrayList and dataBind it so it would look like [code] Loading it into an ASP DataList. SO Fname + Lname + age + DOB are loaded on the same line/index. Not sure how to go about this. I'm sure it's an index issue..but not sure the thought process to even begin to load these elements into the "0" element, then the "1" and so on. Not puling the information from a database, just preset arrays/arrayList. ANY suggestions? ( I have it so it is dataBound to one arrayList entry as in [code] This works fine. But if I wanted to add the last name to the first name on the same line...that's were I am not seeing the connection.
View 5 RepliesI have an 2-d arraylist with 2 fixed columns and dynamic rows. The arraylist will be assigned to the session variable at the end of the code below. My question is how can loop thorugh the arraylist from the session to get its value?
If .SQLDS.Tables(.sSQLDSTbl).Rows.Count > 0 Then
Dim NoOfAdjType(1, .SQLDS.Tables(.sSQLDSTbl).Rows.Count - 1)
For iRow As Integer = 0 To .SQLDS.Tables(.sSQLDSTbl).Rows.Count - 1
[Code].....
