THis is a line of code i have, it's a code to go at the bottom of a document and the title of the question is the error it has, how do i change the 'Chars' to not be read only? I can only guess 'Chars' is a character.
pagecode(1) ="01274-6759q-DDD"
If you're not living on the edge, you're taking up too much room
I get the Error Property 'Chars' is 'ReadOnly'
View 3 RepliesOne of my ASP.NET websites makes use of the CultureInfo class to format currency values and normally this works fine. However, some new code is causing some unexpected problems. In the code sample shown below, txtBox1 correctly displays £99.00 while the line that specifies a value for txtBox2 generates the following error,Too many arguments to 'Public ReadOnly Default Property Chars(index As Integer) As Char'.The key difference in the txtBox2 value is that it is derived from a SQL Server database reference using Linq-to-SQL (CurrentUKFees.Print1). The relevant database value is the integer 8 and I was expecting txtBox2 to show £8.00. If I delete the CultureInfo code then txtBox2 correctly shows the value '8' without any currency formatting.[code]
View 1 RepliesError1 Too many arguments to 'Public ReadOnly Default Property Chars(index As Integer) As Char'.K:\VB\Chap06\SumOddEven Solution\SumOddEven Project\Main Form.vb2645SumOddEven Project
Private Sub calcButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles calcButton.Click
Const prompt As String = "please enter even and odd numbers click cancel to end"
Const Title As String = "odd & even Number"
[code]....
i get this error?
' Create the order and store the order ID
Line 175: Dim orderId As String = ShoppingCartAccess.CreateCommerceLibOrder(shippingId, taxId)
[code].....
I am using a PropertyGrid control to edit my class properties and I am trying to set certain properties read-only depending on other property settings.This is the code of my class:
Imports System.ComponentModel
Imports System.Reflection
Public Class PropertyClass[code].....
This is the code I am using to edit the values:
Dim c As New PropertyClass
PropertyGrid1.SelectedObject = c
The problem is that when I set SomeProperty to True, nothing happens and when I then set it to False again it sets all properties Read-Only.
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface
'the interface only say that implementers must provide a value for reading
ReadOnly Property PublicProperty As String
End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty
Get
Return _myProperty
[code]....
Conceptually it seems like a derived class should be able to override a readonly property with a read write property. Why isn't this possible?
[code]...
I Like .NET automatic properties, in C# it so easy to declare readonly property by declaring its set section as private like this:
public String Name{ get; private set; }
But when I tried that in VB.NET I was shocked that it is not supported as mentioned here and I have to write it as follows:
Private _Name as String
Public ReadOnly Property Name as String
Get
[Code].....
What the difference between these declarations in VB.NET, which one is preferred and Why?
Which one will affect compile time, runtime or performance at all?
I have a user control and I'd like to give it a custom property named ReadOnly. I get "Keyword is not valid as an identifier", as it thinks I'm writing a ReadOnly Property named something.
so really I can call mine 'Read_Only', but I'm just curious if there's an easy way to get the other name in there, since then my control will be similar to the visual controls that have ReadOnly in the designer.
is it possible (and how) to make a readonly automatic property in VB 2010?
Public Class Foo
Public Property Value As Integer
Public Sub New()
[code]....
problem is that users can write to the property.
It seems that VB.NET and C# readonly keyword have some differences... Say, a ReadOnly property in C# can be assigned in some conditions, but in VB.NET - never?
View 2 RepliesHow would one invoke a readonly property?
ListView1.SelectedIndices.Count
i have this code to build datagridview column. I will fill this coulmn with the data from another column (I have done it) But now, I want it so that the table property READONLY: TRUE and the column TOTAL_PRICE to have $#.00 format.
Public Class columnLoader
Public Sub New(ByVal system As String, ByVal quantity As Integer, ByVal description As String, ByVal totalPrice As Double)
[Code].....
If I have VB declaration like this Public ReadOnly Property Document() As XmlDocument, what is its C# equivalent?
View 1 RepliesI have created a read-only property(name) in class1. How can I use this name property in class2?
Public Class Class1
ReadOnly Property name() As String
Get[code].....
Can I directly carry this name variable value into class2?
I am using a Micrsoft Web Browser Control (i.e. the AxWebBrowser NOT the standard web browser). The only way I can declare the variable for it is as follows:
Dim wb1 As New AxSHDocVw.AxWebBrowser However I cannot then do the following: wb1.Name "WebBr1" It says the Property Name is ReadOnly
It seems that in the following example, TestProperty() and TestDouble() are functionally equivalent. Is the case? I usually use Property/Get when I have a single line "Return Variable_" type of "function", and Function when I have a more involved thing going on. Is that reasonable?
vb
Public Class TestClass
Public ReadOnly Property TestProperty() As Double
[code].....
how can i solve this error in my code i have access database and i need to connect to it and that was done but when i was trying to add new record it gives me the below error Error 1 Property 'Item' is 'ReadOnly'.
cn.Open("Provider=Microsoft.Jet.OLEDB.4.0;Data Source=data.mdb;")
rs.Open("sec", cn, ADODB.CursorTypeEnum.adOpenDynamic, ADODB.LockTypeEnum.adLockOptimistic)
[Code]....
I am trying to develop a simple interface for allowing quick lists to be generated from classes. Basically, the interface needs to return an ID and a Name. However, some classes have a calculated name property which is read only, others just use a read/write name property. Basically, all I care is that it has a getter, it does not matter if the property has a setter. How can I write this interface to handle either or without throwing compile errors?
View 1 RepliesI want to set Textbox1 to textbox 55 to .readonly =true by using says For loop,so i need not key in one by one. Any ways to do it?
I know sonthing like
For index As Integer = 1 To 55
Me.b.Controls("Textbox" & index).Text = index
Me.b.Controls("Textbox" & index).TabIndex = index
[Code].....
In my class there's an object belonging to Process class. So, in my wrapper class, I need to get the "StartTime" & "EndTime" of the process object. I'm having confusion whether to use a ReadOnly property for this or a function returning the date, in my wrapper class
Is it a good practice to use a function for this purpose or a property ?
[Code]...
I'm faced with a couple of problems in VB.net: I have a series of objects, which properties I'm displaying in a grid for the user to edit. My first problem is: how do I get a list of all the properties of an object? Is it even possible? The datagrid control that I'm using accepts string values with the name of the property as parameters, but inserting them manually would be a real problem, because there are a LOT of them. So: is there a way to get a list of strings with the name of each property of an object?
If that's possible, here comes the second question: Now, of course, since users are editing the properties, I'm not interested in showing ReadOnly properties which they cannot edit. Hence my secodn problem: is there a way to check if a property is readonly at runtime?
I have a Windows Form that contains a DataGridView. The DataGridView ReadOnly property is set to TRUE. The DataGridView as 3 columns. I would like to make the cells edible (ReadOnly=False) when the RowHeader is clicked. I thought that the following code would do it, but when I click on a RowHeader and then click in one of the cells in that row, the cell is still ReadOnly.
Private Sub dgvData_RowHeaderMouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellMouseEventArgs) Handles dgvData.RowHeaderMouseClick
[Code].....
I have a procedure that basically bubble sorts players based on the value of dice thrown by the player as follows...
Function PlayingOrder() As Boolean
Dim i As Integer
Dim blnSwap As Boolean
[code]....
How does one implement something as Public ReadOnly Property within a class.
CODE:
The following works in C#:
interface I
{
int X { get; }
}
class C : I
[Code]...
The error message Implementing property must have matching 'ReadOnly' or 'WriteOnly' specifiers is pretty self-explanatory, so I do know what's wrong here. It's also not a big issue, because it's quite easy to work around this limitiation. I'm curious, though: Does anyone know why the VB designers decided to treat this case differently than in C#?
I am trying to create the functionality of resetting the password for the program. However, when I try to create the code for this feature, I am getting "Property 'Password' is 'ReadOnly'". How would I go about getting around this.
Dim strUsername As String = txtNewUsername.Text
Dim strNewPassword As String = txtNewPassword.Text
Dim strOldPassword As String = txtOldPassword.Text
txtNewUsername.Text = strUsername
txtNewPassword.Text = strNewPassword
txtOldPassword.Text = strOldPassword
[Code] .....
Can i have a property that is Readonly for Public but can Read/Write in Private?
View 4 Replieshow ListView pointer is stored/removed at ReadOnly Property ListView in ListViewItem? How is it implemented? I know ListViewItems are stored in ListViewItemCollection which has constructor New(owner as ListView) but I dont know how pointer to ListView is add/remove in ReadOnly Property in ListViewItem...
View 1 Replies