I created a RDCL in the designer. I would like the User to Determine what is shown in the Report. How can I change the query at runtime? (ex. changing the customer Name)
This is the query that I have in the properties:
SELECT [Date], Address, Customer, Orders
FROM Report_qry
WHERE (Customer= 'JohnDoe')
I have the following problem: I select a customer from a dropdownlist and then the gridview should load all items of all orders of that customer. I have the following query:
Dim allorders = From ord In db.Orders
Where ord.CustomerID = Convert.ToInt32(CustomerDropDownList.SelectedValue)
[CODE]..............
I also tried to modify the query as follows:
Dim orderitems = From oi In db.OrderItems
Where oi.OrderNumber = (From From ord In db.Orders
[CODE]...........
But this does not work. I just started using LINQ.
I'm wondering if its possible to change the query that grabs the data from the dataset at runtime, in order to produce a report based on different criteria.My project doesnt use dataset, and I've had to make one purely for the reports I'm currently using the mySQL .net connector calling everything via code, as well as the query I want to make at the time.Also, I don't want the report to be embedded in the application but be a seperate file as the report may change frequently (the layout of it)I've tried setting the build action as none, but I just get an error in the intermediate window.
View 1 RepliesI'm currently in the middle of attempting to create a query that will be used so that the application user will be able to search the a customers id number. I'm completely new to adding queries using the query builder so I've become slightly stuck on trying to get this to work corrently.
I have a database which is set up and in this case the table is called 'cid' which defines the customers id column in the database, this is a primary key and the column has a data type 'AutoNumber'. I've become stuck as I'm not sure what I would have to put into the filter to make this query work.
I'm currently in the middle of attempting to create a query that will be used so that the application user will be able to search the a customers id number. I'm completely new to adding queries using the query builder so I've become slightly stuck on trying to get this to work currently. I have a database which is set up and in this case the table is called 'cid' which defines the customers id column in the database, this is a primary key and the column has a data type 'AutoNumber'. I've become stuck as I'm not sure what I would have to put into the filter to make this query work.
View 7 RepliesHere is the code:
Function getData(ByVal id As String)
Dim reader As SqlClient.SqlDataReader
Dim statement As String
[code].....
I am trying to autocomplete customer surnames direct from the Customer Datatable, using the code below which I got from another thread, but nothing is happening.
[Code]...
load the contents of a query from a dataTable Adapter into a datatable?
View 2 RepliesWhen Creating a query using the sear Criteria Builder . I keep getting the error : "The schema returned by the new query differs from the base query" what does that mean and how do i avoid this problem in future
View 2 RepliesI have an untyped dataset which is populated at runtime. I need to look for a Datarow in the datatable containing a specific value in one of its column ("ID") and when found should set the other column value ("Value") on the same Datarow. How to do it?I tried the following to get the DataRow:
Dim foundrow As DataRow = dt.Rows.Find(ID)where dt is my Datatable and ID is a String variable which is to be found.I always get Nothing as return. I checked the datatable just before executing that line: it has over 100 rows and the the ID to be found is there. I stil get Nothing as return.
[Code]...
If I would connect to database I would run a query like this: "Select distinct Column1, column2 from tablename where somefield=somevalue order by column2". How can I run this query to a datatable? I know .select but that's not enough like dataset.datatable("name").select(filter,short). Still need distinct.
View 2 RepliesHow do I query a DataTable where a value has an apostrophe in it? For example, my datatable has a lastname column and I want to search for the name "O'Bryan", how would I do it? With an SQL query I would just use a parameter & it would take care of the apostrophe automatically. Is there a way to use parameters with a DataTable?
View 5 RepliesI'm using VB.Net to create a windows form application. One form has a DataGridView that displays data from a SQLServer table via a TableAdapter and BindingSource whose filter is set as I need it. Elsewhere on the same form I would like to show totals for four columns of the same table, but from a totally different set of rows. All I've been able to figure out is to create another TableAdapter - but this seems foolish since the SQL table data has already been brought into my application by the first TableAdapter.Is there a way to run a query on the DataTable that was filled by the first TableAdapter, and how do I get the query results?
View 8 RepliesI do have a datatable filled from a flatfile (say .txt). After the datatable is populated, I manipulate the data. After datamanipulation I want to do some analysis of the content of the datatable. For this analysis, I need to aggregate the data.
To keep it simple, let's say I have single orders of customers in the datatable and now I want to get the total order amount for each customer (SQL: SELECT Customer, Count(Ordervalue) FROM Ordertable GROUP BY Customer).
I have pulled information from a database into a datatable (dtCustomerInfo) then I expanded on the columns by processing the data and I can display this in a datagridview without any problem. However, the data is in detail and I want to ultimately summarize by customer name.The code below has a commented sql statement that is the statement I ultimately want but it is not working. However, the idea is that I want to Select from one datatable into another but run aggregate sum on several columns so that I will get one record per customer showing totals for each column.So I broke it down to just pull all data possible into the second table.[code]I do know the grouping in the current select * statement does nothing but my issue is more that the columns do not show up.
View 3 RepliesI have a function (GetData) that parses a SQL string, makes a connection to a SQL Server and dumps the result to a DataTable. It works perfectly on a series of SQL calls I have. I have new query I have added and now the function balks at the adapter.Fill(table) call. I do not understand why the call fails. The SQL portion works fine when run directly against the SQL database (Management Studio). I am thinking the fuctions not capable of dealing with the subquery somehow, just not sure why.
Bindingsource4.DataSource = GetData("SELECT QTY,ITEM_NUMBER,DESCRIPTION,(Select STATUS_TEXT From ITEM_STATUS_LIST Where STATUS_VALUE = Line_Items.Status) FROM(LINE_ITEMS) JOIN PURCHASE_ORDERS ON
[Code]....
I'm trying to access the SQL DB I have designed within my project in Visual Basic 2010 (.NET code seems to work for me 99% of the time) at runtime so that a user can select a method by which to filter a DataGridView.I have a fantasy football draft application that fills the DGV from a Table Adapter. The database is named NFLPlayerDataBase.mdf, the dataset used to fill the DGV is TabNFLPlayers11BindingSource1, the table adapter is TabNFLPlayers11Table Adapter1. The DGV is dgvDraft. Idk if that helps at all.If the user wants to look at only RBs while making their draft choice, I want them to be able to select RB from a drop-down and have the DGV be filled with the query that selects only RBs from the table. I have the drop-down already set and am able to fill in the DGV when the form initializes. I just can't get it to fill with the query request for a specified position.The table I'm looking to use from the .mdf is tabNFLPlayers11 and the column header that will be searched through the filter is "Position." Options are QB/RB/WR/TE/K/DST and will be selected by the user from a drop-down.I cannot find a way to even open the connection whenever I change the value of the drop-down.
View 2 RepliesSynopsis: I have a report generated from the report wizard in VB that works, but I only want to load data from the same department as the current user.
Details: The application connects to MySQL using the MySQL Connector/Net. I have a users table in the database, one of the fields is "Dept_ID." The report I currently have works loads data and everything fine, but I only want to load some of the data from the table, specifically where Dept_ID matches the current user's Dept_ID, basically adding the "WHERE" clause to the select statement.
I used the report wizard to generate the report and data table, etc, just followed from step one. I've looked around and have found something about using parameters, but can't seem to figure out how to pass a variable to the parameter, or if that is even the best option. Using the wizard, I don't have any code to show for it and the report works like it should, I just need to figure out how to configure it further.
on first form one textbox and one button present and in second form crystal report viewer is present in first form textbox i write query and when i click on button i want report in second for with data returned by query
[Code]...
How can i write this query with LINQ to a FoxPro database?SELECT count(*) FROM Table group by item1I wrote it as below, but it doesn't work
Dim Query
Dim dt As New DataTable
Dim da = New Odbc.OdbcDataAdapter("SELECT * FROM table1",connection)
[code].....
I do have the following problem extracting records from a datatable, based on date.
I am using Datatable.compute to sum the relevant rows, at least I'm trying to!
CrTot is a variable of type double
BankTrans is a datatable
dteRecDte is a datetimepicker component
CrTot = BankTrans.Compute("sum(bank_amount)",
"bank_amount > 0 And date_bank_reconciled <="
& dteRecDte.Value.Date)
doing the sum calculation on it's own works properly. I now need to check that the date of the "date_bank_reconciled" field is less than or equal to the value of the date entered in the datetimepicker "dteRecDte.Value.Date", so that only rows with a date either less than or the same as that in the datetimepciker are returned.
I have an SQL table(for example, it have 1 column "kod" with 3 rows:1,2,3 ). To operate it, I used class LINQ to SQL and I create tmp dataset with one table, with one column "col" with values - 2,3,4. To operate with this tmp table i use IEnumerable(T).I want to find only new values in tmp table and write its in SQL table. To find this values, i want to use LINQ query. Queris to each table are worked well. But query for 2 tables don't work.
Imports System.Linq
Imports System.Data.Linq
Public Class Form1
[code]....
How do I perform an sql query onto a DataTable not a Database table?
View 1 RepliesI wrote a procedure that builds a DataTable in memory using data stored on our DB2 database. The function builds a Multi-Level Bill of Materials (BoM), meaning that the data cannot simply be queried. The function works great and returns a nicely arranged DataTable object. However, I then need to query the in-memory DataTable against other tables on our server. What would be the best way to approach this problem? Should I make a DataTableAdapter for the Server tables and then build a DataView? I don't have too much experience yet with Data objects. (By the way, I looked into LINQ to DB2 and even installed IBM's addin's, but our server doesn't seem to support it at this time.)
View 6 Repliesi need to query the datatable & set the outcome as datagridview controls datasource
vb.net
Private Sub Txt_Search_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Txt_Search.TextChanged
'routine objective:- Filter datatable & set the datagridview datasource
[code]....
I'm trying to query a DataTable to get a collection of rows but I'm finding that my search string has to be the exact length of the columns width. So, for example this won't work:
Dim rows As DataRow() = (From r In myTable.AsEnumerable() Where r.Field(Of String)("fname") = "Bob").ToArray()
...but this will:
Dim rows As DataRow() = (From r In myTable.AsEnumerable() Where r.Field(Of String)("fname") = "Bob ").ToArray()
The search term ("Bob") has to be padded with spaces to make it equal in length to the column width (10 characters). Is this how it's supposed to work or am I doing something wrong?Also, how can I do a LIKE search? So for example, I want to search for all names that start with "Bo" or whatever. ie. "Bo*".
I've created an SQL Query using the query builder. In the query builder, you can test the query by clicking the button "Execute Query", and entering the desired values in the parameter fields.
My query returns the correct results when I do this, but when I seemingly pass the same values at runtime, I get 0 records returned.The query is designed such that you can pass nulls if you don't wish to filter data by that particular parameter.
SQL Query:
SELECT ID, UPC, Quantity, Manufacturer, Style, Color, Size, Category, DateReceived, Cost, OriginalRetail, Retail, LocationID
FROM Inventory
WHERE (UPC = @UPC OR
[code]....
In the query builder "Execute Query" dialog, I enter a value I know that the db contains in the "Size" field, "1/1/1900" & "1/1/2199" in Dates A & B, respectively, and nulls for all other fields. This returns 1 record, which is just as I expected. It works correctly.But when I pass the same values into the method created by the designer, I get 0 records returned. I can't figure out where the problem lies. Even if I enter nulls for all fields other than the dates, it returns 0. This tells me that the dates are causing the problem, but I can't figure out why, because I'm passing strings equivalent to what I entered in the query builder.
I have a string like "Hello'World" and a Data Table with some records in it. One of those records is "Hello'World".he problem is, when I do a .Select in the Data Table, it only tries to search for the "Hello" part and throws an error on "World" because it interprets the ' (single. cuote) like the closing cuote on sql.DataTable.select("text = 'Hello'World'")I have gone through msdn doc, and it says I can escape some characters with [] brackets or f.slashes , but I just can't figure out: .select("text = 'Hello[']world'")
View 1 RepliesI have a set of LINQ queries filtering original datatable (loaded from Excel file) based on user selections in Comboboxes. Then the result is joined with Arraylist to further filter the set. Arraylist is a simple list of strings.
Query:
If (Samples.Item(0) Is Nothing) = False And Samples.Item(0) <> "All samples" Then
queryResults = From records In queryResults Join samp In Samples _
On records("SAMPNUM") Equals samp _
[Code]....
How can I query a DataTable to find all of the unique values in a column? SQL has the 'unique' or 'distinct' keywords, but I dont know how to do this against a DataTable.
View 6 Replies