I have this code which works well:
Public Function LoadBinaryFile(strFilename As String) As Byte()
Using fsSource As FileStream = New FileStream(strFilename, FileMode.Open, FileAccess.Read)
' Read the source file into a byte array.
[code].....
Here is my code:
Public Function ReadBinaryFileLarge(strFilename As String) As Byte()
Dim position As Integer = 0
Dim bufferSize As Integer = 4096
[Code].....
Is this the correct way to go about this problem? If not, how should I attack it?
i want to read/write to some files.Specifically my application searches text files but i also want it to search binary files. The problem is : how will i know when the file is binary and not text ? Also how will i get the hexademical contents of a binary file ?[URL]
View 2 RepliesHow do I read a raw byte array from any file...
Dim bytes() as Byte
..and then write that byte array back into a new file?
I need it as a byte array to do some processing in between.
I'm currently using:
To read
Dim fInfo As New FileInfo(dataPath)
Dim numBytes As Long = fInfo.Length
Dim fsAs New FileStream(dataPath, FileMode.Open, FileAccess.Read)
[Code]....
Im trying to read and write to a file in binary.to give an example of what im trying to do i have posted a picture below.the string is 12 bytes long and each four bytes has a float.the one in red is set at 1 and green and blue are 0 giving the read as the overall color. i have been trying to get this well i tried once and gave up but its been awhile.i have this so far but it doesnt work. this is kinda what i got to read the bytes out but its messed for i have been trying everything i could think of
Code:
Dim s1 As FileStream Dim br As BinaryReader s1 = New FileStream(Application.StartupPath & "/files/test1.bin", FileMode.Open, FileAccess.Read) br = New BinaryReader(s1) Dim bytes(12)
[CODE]...
I have this to write the color back from a color dialog
Code:If dlgColor.ShowDialog() = DialogResult.OK Then
PictureBox1.BackColor = dlgColor.Color()
[CODE]...
i tried out this [code]i can create and write in the .bin file but how to read it then?
View 20 RepliesI am trying to write a simple application that monitors the COM port and writes the incoming binary data to a file. So, I gathered a File class is provided, but looking at its methods list in the Help page, I see no method for writing individual bytes (and the Write methods seem to close the file after writing).
How can I write a byte array into a file, keep it open and repeat this as necessary?
What do you think what is faster:
1. writing 1000 records in a binary file on a server? or
2. passing the same 1000 records in a database on a server?
and
1. search a specific record in a binary file? or
2. search the same specific record in a database file?
How can I read arrays from Binary Files?
View 9 RepliesI am trying to use the following stmt in VB and I am getting an error: Open (objFiles(lngLoop)) For Binary Lock Read Write As #hndZip_File On the "Open" word I am getting "Open is not declared. File I/O functionality is available in the Microsoft Visual Basic namespace." On the "For Binary Lock Read Write As #hndZip_File" I am getting "End of statement expected" I originally thought I had to add "Imports Microsoft.VisualBasic.FileIO" but this did not do anything.
View 2 RepliesI am trying to make a program in Visual Basic 2010 that should do the following:
-Open file as binary
-Start with position 57 and read the following characters until a 0 is found, print the whole name
Inside the binary file, all the files' names end with 0 (which should not be printed), example:
B000000.dat0
eft.dat0
G000000000.b70
For the above examples, the names that should be printed are B000000.dat, eft.dat, G000000000.b7 respectively. The code I wrote is below. The problem is that i am not sure how to read the name until the 0 is found since the names are variable in length and so are the extensions(dat, b7). Also some names have 0 in them which makes things difficult.
Using gs As New FileStream(fileName, FileMode.Open)
gs.Position = 57
Using gr As New BinaryReader(gs)
For x As Int16 = 57 To 70
Dim textvar(x) As String
textvar(x) = gr.ReadChar
text3 = textvar(x) & (gr.ReadChar)
Next
End Using
End Using
Using fs As New FileStream("C: estsomefilename.ext", FileMode.Open)Using rdr As New BinaryReader(fs) fs.Seek(225, SeekOrigin.Begin)Dim b() As Byte = rdr.ReadBytes(32)Dim s As String = Encoding.UTF8.GetString(b)
End Using
End Using
End Sub
I want to develop an application which can Write, Save, Read text files(or html files) What I want the application to do is. When I open my application I can write stuffs and then it will save it to my hosting/server. Then, the application will read the text which I already save.. So far, I can only make the application read it by using WebBrowser control and navigating it to a specified URL. Example: [URL](or message.txt) Which I modified from the website not from the application. I want to modify the text or html files from my application.
View 6 Repliesi'm using sharpdevelop to program WPF application(I'm newbie to WPF i've knowledge of VB only and no C#, is it necessary to learn C# to know WPF ?).
and i want to read CSV file first. after that i want to modify and save file. any suggestions and pointers for this ?
I have the following code for reading XML files.[code]...
View 8 Repliesreading and writing files. Let's say I have a text file with multiple lines that I want to be read into my visual basic program. The first line is displayed in textboxA while the rest of the lines are displayed in textboxB. How do I accomplish this? Am I able to use the peek method for textboxB but somehow tell it to skip the first line? Now textboxB is obviously a multiline textbox and I want the user to be able to type something into another textbox (textboxC), press a button, and it will be displayed in textboxA. How do I make the text in textboxC get displayed on the first line of textboxA and move all the other lines down the list?
View 2 Repliesin the following thread, [URL]..my first reply, writes and reads two files..
my question is, is that code used properly for writing/reading those 2 files?
for some odd reason, i feel like i am over using the writers/readers.is there a way to only use one writer/reader, not 2, as my code in that thread does, to write/read 2 or more files?
I have an application that works in both 32 and 64 bit, except that on the 64 bit system it can not open/ read/write any files.I know the 64bit file system is different, from what I heard. How can I make up for the changes? I have no access to a 64bit system, but I want to make my program able to find and open the files.
View 1 RepliesReading and writing *.amc files using vb.net 2005. how to read and write *.amc files in vb.net 2005.
View 3 RepliesI need to wqrite an app that can read through an Outlook PST file, and write messages to another PST file based on the content. I have never done any Office Automation, and was looking for pointers in getting started.
View 3 RepliesHow would I read/write settings to an INI file?
View 3 RepliesI use a code like this which perfectly works and creates MS Excel files so I can create Excel files and save my data into it.I also use a similar code to read the data, however, it only read and writes Excel 97-2003 files, and does not support Excel 2007 file format![code]...
View 2 RepliesI use a code like this which perfectly works and creates MS Excel files so I can create Excel files and save my data into it.I also use a similar code to read the data, however, it only read and writes Excel 97-2003 files, and does not support Excel 2007 file format!Do you have any suggestion on this?
Code:
Dim ExcelString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + FileTextBox.Text + ";Extended Properties=Excel 8.0;"
[code].....
I am a new to visual basic 2010 and I am creating a small game program that will have players names and keep their scores in a text file. I placed the text file in debug folder for debugging purposes. The code below has been simplified for demonstrating purposes only.
[Code]....
I have one project that I need help writing that I have spent months trying to write with no luck. Anyway so here is my question. I want to write a program that can display a phones filesystems that is connected to my computer by a serial port. I would like to be able to Read/Write files and stuff if possible. I have tried many ways of doing this so this is my last resort.
View 5 RepliesI am creating a program that uses text files to recall data and store them in a variable. My intention is to make this text file hidden so it will be harder to find and for other people to edit the data inside. I'm looking for a code that enables me to write to the file without unhiding it.
View 5 RepliesHow can I make txt files and read them in VB2008? The text file does not just consist of one single line. But probably more than a single line.
How do I read the txt file and put each line in one variable.
For example, the txt file:And read it, putting each name in an array variable.
This question only applies to files of line-terminated/text strings.[code]I suspect that ultimately, I will generate the myfiles version of the HD file as I write it to disk,but at this point in my VB.net 'skills', until I can prove what I've written by reading it back and having control of it in my program, I can't assume anything about the data/format/file that I have written.
View 12 RepliesAll i am trying to do is read and write files to a shared folder on a network in visual basic (VS 2010). I can go to the folder through windows without a problem and without being prompted for a password. However when i try to do it through visual basic, it cant find the directory. Here is my small snippet of code that i (hope) is telling me that the program cannot connect to the folder. [code] Are there any known issues with VS 2010 that may cause this? Maybe something else in my code that could have an effect? This is in my form_load event though, so it is literally one of the first things that runs.
View 1 RepliesIm trying to write a loop that will read through a number of *.csv files in a folder and then stuff the data into SQL. The code works and will happily put the data i want for a named file into SQL no problems. So when i had that working i then tried to loop it so that it would do the same for all files in the folder until all files had been done, and not error out if there where no files etc.
Maybe im tired (well, i am) or not had enough coffee but i just cant get this to work, it should be simple - i know it is infact, but its making ME feel simple.i think i should have an integer count in there, but similar examples ive seen dont use one. Also when trying to open the path i get an error at runtime "the path is not of a legal form"
code:
Public Sub ImportCUSTCSVs()
Dim dt As New DataTable()
Dim line As String = Nothing[code].