Reading Page Size Of Existing PDF?

Jan 6, 2011

I need to read PDF Page size of an existing PDF. I have both itextsharp and acrobat used in my project. This is what I've tried.

Dim pagesize As Rectangle
Dim reader As PdfReader = New PdfReader(formfile)
pagesize = reader.GetPageSize(1)
If pagesize.Width = "396" Then
Testing = "Y"
Else
Testing = "N"
End If

I get page size as = {Rectangle: 396x309.6 (rot: 0 degrees)}
And Testing comes out = Y
This seemed great at first, until I found that I get those exact same values regardless of how big the pdf is...so now i'm back to square one not knowing where to turn. Interesting thing to note though When I hover my mouse over reader.GetPageSize(1), nothing shows up while debugging, but pagesize does get the value stated above.

View 1 Replies


ADVERTISEMENT

Ready An Existing PDF Page Size (ex. 8.5 X 11 - 11 X 17)

Jan 6, 2011

Like the title says i'd like to read an existing pdf page size with VB.Net. I've been working with Itext.Sharp, and the Acrobat.dll.

View 1 Replies

PDF - Takes A 1 Page Existing Pdf That Ispecify And Inserts That Into Another Existing Pdf?

Nov 11, 2010

I need to make a program in vb that takes a 1 page existing pdf that i specify and inserts that into another existing pdf that i specify.

View 4 Replies

Rotate A Single Page 90 Degrees With ITextSharp / VB In An Existing Multi-page PDF

Dec 17, 2010

I am trying to integrate iTextSharp into an existing Document Imaging application that allows users to rotate individual pages that may have been scanned in at an incorrect angle (it happens more often than I would have thought).

[Code]...

View 1 Replies

Call New Page From The Existing Page?

Aug 22, 2009

I am beginer to ASP.Net. Can u tell how to call new page from the existing page. In VB.net by executing the statement "Form2.show()", New page will be loaded. In the same way how to load new page in ASP.Net ?

View 2 Replies

Add Existing Tab Page To Tab Control?

May 26, 2009

How to add existing Tab page to tab control like i am removing Me.tbIncoming.TabPages.Remove(tbPgViewer) 'I removed in button close and after i want to show in form load eventadil

View 4 Replies

Add Text To A Page On An Existing Pdf With Itextsharp?

Feb 4, 2011

I have googled and searched and I am currently unable to work out how I can achieve this.I want to open an existing multipag pdf and append with text absolutely positioned on specific pages before outputting the appended pdfI am sure I need to use the a pdf stamper but I am a little confused and am not confident in readin c# examples

View 3 Replies

Reading A File Size?

May 17, 2010

I would like to read a files size.I've looked around in

My.computer.filesysytem.""

there's a lot of file options but I've not had any luck yet.

View 20 Replies

Change The Size Of My Tab Page?

May 2, 2012

How can I change the size of my tab page? I want it to be longer so that it fits across my GUI.

View 7 Replies

How To Print Page Size A5 In VB2010

Jan 13, 2012

I want to print page with size A5 in VB2010 by one click (print page size of my printer is A4)

View 7 Replies

Printing Each Row Of Grid On A Page Size Of 3*6

Feb 1, 2011

I am generating a grid view having column with images. I want each image to print on stock paper: Marco ITEM #A-6LI (3inch by 4inch Inserts page) using printer. What setting and code should I write? Also I want to see the print preview. i am using VB.Net, and on pop up some grid is displayed having one column with format for each user this is repeated on the whole page of pop up, but i want each of set to print on the page i mentioned above. How can i achieve this?

Basically i want to know how can i print each row of a grid on a page size of 3*6

View 1 Replies

Changing Default Page Size For Printing?

Apr 26, 2012

I have a vb.net application that uses 2 crystal reports to print out reports. The first report is A4 and the second is A5.

How can my code access the printer default settings and change the default paper size to A4 and A5 each time without having to do it manually.

View 1 Replies

Setting Up Custom Page Size In 2010?

Nov 4, 2011

I am trying to set custom paper size on my printer with Winspool.drv. But getting error as 'Attempted to read or write protected memory.'

Private Sub btnTest_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnTest.Click
Dim hPrinter&

[Code].....

View 1 Replies

Check Packet Size Of TCP Data Before Reading Next Byte In Stream

May 25, 2009

I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.

The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.

My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?

[Code].....

View 1 Replies

Check Packet Size Of TCP Data Before Reading Next Byte In Stream?

May 25, 2009

I am sending data to server via TCP IP Connection. I am using a continuous loop at the server end - that accepts new clients and while streams can be read, it reads data stream.

The data is sent from the client with 2 leading bytes of data that represent the size of the packet of data sent and type of data.

My question is: how do I retrieve the size of the data packet and then check that this amount of data has been retrieved?[code]...

View 9 Replies

Program Hang When Reading 100mb Size Text File

Feb 9, 2009

i wrote a program to read a 100mb size text file and loop through it to look for some kind of information I need. Before even i start looping through it, my program hang when i start to read the whole text file using the ReadAll method of the TextStream object. Is there any way that I can read through the whole text file more efficiently?

View 7 Replies

Reading Large File Stream In .net (How Can I Increase Buffer Size)?

Mar 3, 2009

i need to read a large file stream binary my code is Dim sr As New IO.FileStream(srcFile,

[Code]..

View 10 Replies

Enable Choose Paper Source By PDF Page Size?

Nov 8, 2011

I'm writing a console application in vb.net using which i'm trying to print pdf documents from a specific directory. I'm able to print the PDF files but my problem is that the PDF files vary in Page sizes and the printer fits them to the default page size which is set to letter.

My questions is, Is there a way to enable "Choose Paper Source by PDF page size" using vb.net for the printer settings.

View 2 Replies

Increase The Page Size In A Report Viewer At Asp.net Project?

Mar 2, 2011

I am using a Report Viewer Page in a Asp Project, As my query is big i have Somany columns to be included in the Report viewer. But i am in a position that i cant increase the Page size of the Report to be Correctly fix the Entire Columns in the Report.

View 1 Replies

Set The Default Print Page Size For Microsoft Word

May 5, 2012

Im working with vb.net and microsoft word using Microsoft.Office.Interop.Word and everything is fine. My only problem is I cant find a way to change the default page size printing setting from "letter" to "A4".
This code was doing the job for Crystal reports but isnt doing it for Word

[Code]...

View 2 Replies

VS 2010 Reading / Loading Controls Size And Location Back From A Txt File

Mar 14, 2011

im toying with an idea based round having controls end user movable at runtime, and having a function to save the current position/location of all the controls, so then i can skip through presets i already made as it were. Ill be using .ini files eventually (just testing with txt files to check it was a valid aproach) I can get all the info i need into the txt file, the problem is how to read it back into the app?

[Code]...

View 3 Replies

Create PDF Using DoCmd.Outputto Method In Legal Size Page?

Sep 30, 2011

I am using the following command "DoCmd.Outputto acOutputReport, Report Name, acFormatPDF, FileName".The report I am using legal as the page size. When the PDF is created in is created using letter size pages and the buttom of each page is cut off. I would like to find out why this is happening.Bob Gouveia

View 4 Replies

Application Reading Web Page - VB 2008?

Jun 29, 2009

im just wondering is it possible to do this easily as im not great at VB I have a simple webbrowser open when i click a menu item, and when it loads it goes to a text page on a online server i have (ends in .txt) which just has some text on, is it possible for me to add a button which when i press it, it searches the page for a certain number/word, then opens a message box with some text in relation to the number/text, or is this not possible with a webpage.

View 6 Replies

IFrame Tag - Auto Resize Depending On Page Size In ASPX Files

Feb 9, 2010

I put in the iframe tag as follows in my .aspx page - Now what code do I put in javascript or vb.net to make this auto resizable depending on the size of the page that comes in?

View 1 Replies

Reading 'Checked' Property Of Dynamic CheckBox On Page Postback

Dec 29, 2009

How can I check the 'Checked' property of a dynamically-created checkbox during the Page_Load subroutine? Basically, I have a VB.NET page that creates some table rows dynamically, based on a number selected by the user. So, for example, if the user selects "3" from a dropdown list, the page posts back and creates three table rows. Each row contains a couple of textboxes, a dropdown list, and a checkbox (which are all .NET form controls rather than plain HTML controls, I should point out).Typically, the user would enter a few details into the form controls, and click the 'Submit' button, after which the page iterates through each row, and inserts the data into a SQL Server table.But if the user ticks the checkbox for that row, this signifies that the page is to ignore that row, and NOT insert that row of data into the database when the user clicks 'Submit'. This works well, but there is a problem. If the user clicks 'Submit' and some of the values entered into the form controls are invalid (so, for example, the user didn't enter their name) then the page won't submit the data, and instead, shows an error to the user informing them of the values they need to change. But if the user creates three rows, for example, but decides to "ignore" the third row (by ticking the checkbox) then when the page posts back, finds some invalid entries, and re-shows the form to the user to allow them to correct any errors, I'd rather the page didn't render the third row altogether. After all, they chose to create three rows originally, but then decided that they only needed two. So it makes sense that the third row is not recreated.

But what seemed to happen was that objCheckbox.Checked was always returning False, even when the checkbox was ticked. Once the page had loaded, the table rows had rendered again, and the tick was present in the checkbox, so it's not like the value was lost on postback. But at the point I check whether the checkbox is ticked, it always returns False, rendering a table row that the user doesn't need.Does anyone know how to get round this problem? I've read lots of articles about the .NET ViewState, and the page lifecycle, but I've yet to find a solution that works. I simply need to be able to check if a checkbox is ticked before re-creating some dynamic controls. [code] But then I basically found out that you can't override a protected member with a public one.

View 1 Replies

C# - Reading & Writing In Asp.net - When The User Refreshes The Page, For Some Reason The Sqldatasource Loads The Old Data?

Nov 18, 2010

I have a basic page which has fields that I read from the database and write to it. I would like to know where I should call the insert and read commands. I know about age_load but heard about page_loadcomplete.I noted that when the user refreshes the page, for some reason the sqldatasource loads the old data(before the write) even though new data has been loaded on the form.

View 2 Replies

Excel 2007 - Code To Enlarge Font Size, Font Name And Do Page Setup In Ms.excell?

Jun 2, 2011

I am creating an excel report from vb.net. Now it works. But i realize that the apparent does not make sense. I just want enlarge some font size and change font name plus setting up the page to fit my receipt printer (Epson TM-T88IV).

View 1 Replies

Structures - Fixed Size (Overall Size And Item Size)

Jun 8, 2011

Now all went well about from using the structure correctly. The working of the structure was perfect. How ever i missed Two important issues. The structure needed a fixed size of 10 items (9 in programming terms starting from 0) And also out of the 5 items allowed to be chosen as one of the member types for the structure a limit of 5 items of that particular type.

[Code]...

View 9 Replies

Tab Page 1 To Tab Page 2 (textbox1 Input From Tab Page 1 To Textbox2 In Tab Page 2)?

Jun 12, 2011

I have a text input in textbox1 in tab page 1 and i want that text from textbox1 will be displayed in textbox2 in tab page 2.

View 3 Replies

Javascript - Pass Page Or Master Page Object To AJAX Page Method

Oct 5, 2010

I wrote a page Page method in my aspx page. in web service method I need to call FindControl method return textbox and get text box value. But my findControl will take MasterPage object to iterate.

see my code

<script type = "text/javascript">
function ShowCurrentDateTime() {
$.ajax({

[Code]....

How to pass Master Page object or Page to Page method?. So I can use in Sared method.

Is there any way I can access Textbox value directly in Page method? I need access couple of controls in Page Method.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved