with an error I can't seem to get aroundregistry (originally written back in .NET v1.1 and has been upgraded to v3.5). I'm trying to get it 64-bit compliant and am almost done. Anyhow, we also have a small .net utility application that was written for the system admins that maintain the application to edit/change the registry values since they are encrypted and can't just be changed via Regedit. The error I'm getting is in the utility application code.
Error: "The specified RegistryKeyPermissionCheck value is invalid. Parameter name: mode"
The error pops up when the utility code attempts to create a non-existant subkey, like so:
Dim regKey As RegistryKey
"The specified RegistryKeyPermissionCheck value is invalid.Parameter name: mode"I have messed around with the code so dam much but still get that error.Here is the original just cant seem to figure this out at all, i even have regedit open on that key and no changes are being made.
I have problem of writing the registry key under the hkey_local_machine. I keep get the same error when I effort to get the key on hkey_local_machine software and to write the new key .[code]...
I have the code below that should enumerate a certain registry key. When I try to run the code, it gives the error "Type 'RegistryKey' not defined." I'm assuming I need to add a reference to the project, but I'm not sure what.[code]
I have encrypted a user inputted value and successfully stored it in the Windows Registry. Now I am having problems Decrypting that RegistryKey when my Form starts up and making sure it is the same key that was originally stored. My decrypting code has been working but if I go inside the Registry and add an extra character on to that keys value, my program is still running.. It is not supposed to run if that RegistryKey is not the one that was originally user inputted..[code]And I also have tried A LOT of other examples, but I am not going too post them all. So is there anyway I can check if a RegistryKey exists and Decrypt it to make sure that it has not been changed on my programs startup?
I have a project that reference from leadtools 16.5, and after that, i want to run my project..i see am error like it " An error occurred creating the form. See Exception.InnerException for details. The error is: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. im using vb 2008 pro
I'm using Visual Studio Development Server (Visual Basic 2010) and it works fine. Now I've enabled NTLM Authorization because I want to test the website using a different user account. Now when I try to access the website I always get the following error page:
Server Error in '/' Application.
HTTP Error 403 - Forbidden.
Version Information: ASP.NET Development Server 10.0.0.0 .I'm using a test account which is a normal user within our domain. I've already set the access rights in my project folder to Full Access for this user but it does not help.
When I deployed my project on a server, in certain circumstances, I get an error page that indicates I should create a custom error page. I was wondering how exactly I would implement this custom error page the server asks for to give me a precise and helpful message or preferably, how I would get the error to just display on the main page?This is the error message I got below
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
I try to compile a project with msbuild.exe I have this error :
vbc : error BC30136: Error creating Win32 resources: Error reading icon '"Recycle Bin Empty.ico"' -- The filename, directory name, or volume label syntax is incorrect.
This icon is the Application icon which is in the same directory of the project.vbc is started with /win32icon:"Recycle Bin Empty.ico" parameter.Don't know why MSBuild can't reach the file.
AnonymousPathAnonymized.vb : error BC30037: Character is not valid. AnonymousPathAnonymized.vb(2) : error BC30627: 'Option' statements must precede any declarations or 'Imports' statements.
This error first appear to occur randomly. Steps to recreate:Open Visual Studio and load a solution (some files automatically opened) - this is when the problem occurs Close all open files Restart visual studio and load solution (no issues)Open Exactly the same files again, restart visual studio and load solution so files open automatically (problem occurs!)
However, when trying to narrow it down to a single file (that is automatically opened when the solution is loaded), I couldn't reproduce the problem. Now with all the files open again the problem doesn't occur!!! So it looks like it is fixed - though this happened before and eventually the issue came back.
I think it is to do with one of the user controls with DevExpress controls on it - when the error occurs, the designer displays the error. Though I can't reproduce it at the moment to confirm that.
I got a serious problem. Though I have made my program newly it shows error. I have used 1280,1024 animation only for first form then used 1280,1024 image for every form. Today I was checking then it was showing me error message for 19th & 20th form. If I use On Error Resume Next then it shows error for another form ; if I use same code there in the menu item I mean so that I can get rid of error when I click to show a form it shows another error. First error message is "InvalidOperationException was unhandeled An error occurred creating the form. See Exception.InnerException for details. The error is parameter is not valid." and second error is "OutofMemoryException was unhandled Exception of type 'System.OutOfMemoryException' was thrown". I have noticed it that it doesnt show error message for those form which have few labels and text boxes. It shows error message for those forms which have 1 menu bar, 2 picture boxes(one is 1280,1024 & another is 250,456), 2 group boxes, 40 labels, 3 combo boxes, 38 text boxes & three buttons. Please help me I need to get rid of this problem. Does it mean that I cant use unlimited control there in my form?
I have the following Stored Procedures create or replace PROCEDURE WEB_AC
[Code]...
First one: At some point in the application I have the valor parameter (of the visual Basic Function) as a string with spaces that is something like "some string with spaces". When this happens, the stored procedure don't update the table. If I execute the SP directly in the DB (with SQL Developer) all works fine. I know it has something to do with the string missing some quotes(') but I haven't make it work yet. Some ideas on this?
Second problem: Sometimes, when debuging the application, if I interrupt the execution, I start getting the ORA-24338 'statement handle not executed' error for hours every time I try to execute it again. I believe it has something to do with an open transaction. But honestly, as I'm new in working with Oracle, I really have no idea what the problem could be.
I get this error when I try to publish: Error 2 An error occurred while signing: Failed to sign binReleaseapp.publish\setup.exe. SignTool Error: ISignedCode::Sign returned error: 0x80880253
The signer's certificate is not valid for signing.
SignTool Error: An error occurred while attempting to sign: binReleaseapp.publish\setup.exe MITS 2008
I downloaded the .net 3.5 sp1 and it performed a repair but it still will not publish.
I used error provider tool to display the error when the textbox is empty. when the error message is displayed immediately it is inserting the record into the database.I want to clear the error and then insert. how to take the control to textbox?
I used error provider tool to display the error when the textbox is empty. when the error message is displayed immediately it is inserting the record into the database.I want to clear the error and then insert. how to take the control to textbox?..Imports System.Data.OleDb
Public Class Form1 Dim myConnection As OleDbConnection Dim myCommand As OleDbCommand
Do I have to sign my VB.NET applications? I'm getting an error: SignTool reported an error 'Keyset does not exist' But have no interest in signing anything as the project is small and will only be used internally to my department. I could create a temporary key. But why would I want to?
I am running my application and at random times when it is unable to connect to the database I get an error saying "A Transport-level error has occurred when receiving results from the server. (provider, TCP Provider, error: 0- The specified network name is no longer available.) How can I stop this pop up from coming up? It comes up every once in a while and I want to disable that.
I recently upgraded a project from 2003 to 2005, and there were errors in them, but I am unable to view any in the error list. Only one error displays in the list
I am new to code signing.After I swtich from the temperary test certificate to a real certificate from a CA, when I publish, I got two errors"Error 1 Cannot publish because a project failed to build.""Error 2 SignTool reported an error 'An internal certificate chaining error has occurred.'."and when I checked "Sign the assembly", when I build, it asks for a password, after I entered password, it says "Cannot find the certificate and private key for decryption"
i turn on my computer and appear this " Ixdn MsdMon.exe-fatal error CLR error: 80004005 the program will now terminate" and the computer runs very slow
This is not a homework of mine and i had never tried ms access database with vb so i just gave it a shot. so this is my first time and i am just trying not asking anyone to complete my homework. I have been searching for this a lot on internet but couldn't find a solution to this so i decided to ask this question here. i have this sql code. what i want to do is that create a basic login form where users puts it's username in the UsernameTextbox and Password in the PasswordTextbox. If the the information match then a message box appears saying that the user is valid and if the information does not exist, a mesage box appears saying the users is not valid. now everytime i execute(run) the code, i come up with this error: Syntax error (missing operator) in query expression ''UserName' = 'Admin' 'PassWord' = 'testing123''.
The field names(UserName, PassWord) are also correct they are same as in the database. the information put in the username and password textbox are correct and they match the information on the database. But i dont know why this error comes up.
My code module is the following:
Imports System.Data.OleDb
Public Class LoginForm1
' Cancel button Private Sub Cancel_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Cancel.Click Me.Close() End Sub
I am trying to upload a file to Mainframe machine from my VB.net application. I am getting the following error.The remote server returned an error: (501) Syntax error in parameters or arguments
