I have the following string:
<TD><!-- 1.91 -->6949<!-- 9.11 --></TD>
I want to end up with:
<TD>6949/TD>
But instead I end up with just the tags and no information:
<TD></TD>
This is the regular expression I am using:
RegEx.Replace("<TD><!-- 1.91 -->6949<!-- 9.11 --></TD>","<!--.*-->","")
How to keep the numbers and remove just what the comments.
http:[url].....To convert some outlook HTML to plain text.It nearly works, the only thing that it leaves behind is the CSS which outlook places in html comment tags <!-- --> in addition to <style> tags (which are removed).This is the original text:
I would like to match a certain url from an html page using a regular expression. For example I only want the url that appears after the <h2 header in the html page.basically here is the url I want to match; so what would the regular expression look like.
I know it may be quite easily for you. i have a text which contains 40 lines, I want to remove lines which starts with a constant text. check below data.
When I used (?mn)[+CMGL:].*($) it removes the whole text , when I use (?mn)[+CMGL:].*( ) , it only leaves the first line. +CMGL: 0,1,,159 07910201956905F0440B910201532762F20008709021225282808 +CMGL: 1,1,,159
I am looking for a regular expression that can convert my font tags (only with size and colour attributes) into span tags with the relevant inline css. This will be done in VB.NET if that helps at all.I also need a regular expression to go the other way as well.To elaborate below is an example of the conversion I am looking for:
<font size="10">some text</font>
To then become:
<span style="font-size:10px;">some text</span>
So converting the tag and putting a "px" at the end of whatever the font size is (I don't need to change/convert the font size, just stick px at the end).The regular expression needs to cope with a font tag that only has a size attribute, only a color attribute, or both:
I also need another regular expression to do the opposite conversion. So for example:
<span style="font-size:10px;">some text</span>
Will become:
<font size="10">some text</font>
As before converting the tag but this time removing the "px", I don't need to worry about changing the font size.Again this will also need to cope with the size styling, font styling, and a combination of both:
I am extracting basic HTML & text from CDATA tags in an XML file and then displaying them on a web-page.The text also appears in a rich-text editor so it can be edited/translated, and then saved back into a new XML file. The XML is then going to be read by a flash file, hence the need to use old-fashioned HTML.
The reason I want to convert this code is mainly for display purposes. In order to show the text sizes correctly and for it to work with my rich text editor they need to be converted to XHTML/inline CSS. The rich text editor will also generate XHTML/inline CSS that I need to convert 'back' to standard HTML before it is saved in the XML file.I know the temptation will be to tell me a number of different ways to set up my code to do what I want but there are so many other permutations I haven't even mentioned which have forced me down this route, so literally all I want to do is convert a string containing standard HTML to XHTML/inline CSS, and then the same but the other way round.
I have just comment and remove comment with the key combination ctrl + k, then ctrl + c and ctrl + k, then ctrl + u. But I think, I have pressed one time an another key. And I get the small mark in the code. What is this, and how can I get rid of it?[URL]..
I need to find out if the TextBox control contains a HTML comment but without closing tag. e.g. <!-- content here notice that it's possible that they can enter more than one comments so all of the comments have their closing tag except one (or even more).
I just need to find if there is ONE or more html comments without closing tag.
I'm trying to create a regex which will match either one of the following [code] This regex is supposed to return all and any form of the function that is used.If match string were - FVAL(A,"B")+5 then match group should be FVAL(A,"B")
I can get it to work in VB.NET but not C#. I can't figure out why it works in one but not the other.
[Code]...
As far as I can tell the patterns are identical in both languages with escaping. When I run the VB code I get a match. When I run the C# code I get nothing.
I have just coded the below regular expression. I have a mini rich text editor on a web page (very similar to the one I am using to post this question) and I want to make use of a double asterisk to indicate which words/phrases should be wrapped in a strong tag. The aim is to allow the user to add pre-defined HTML elements without actually having to submit HTML. [code...]
Maybe I am over-optimising this, but I want to know if this can be made more efficient?
It is a little like a search and replace, I want to replace any string that contains any substring in parentheses with the same string but the words in parentheses colored RED: Eg
Take this text in TextBox1:
"The Prime Minister (that idiot from Scotland) made a speech today"
and convert to this text in RichTextBox1:
"The Prime Minister (that idiot from Scotland) made a speech today"
I am trying to use regular expression for extracting data from web page. but everytime i change the URL i need to change my regular expression for URL.
I have the following function that I am using to remove the characters �4 and nulls from my xmlString but I can't find what do I need to change to avoid removing the from my ending tags. This is what I get when I run this function
I have a textbox which takes as input the email address. Do you have regular expression validator in vb.net so that I can check if '@' is present or not in the string
I have a string (can be anything) and somewhere in the middle of the string there's a filename with the extension 'txt'. The filename can basically be anything, and any filename is correct, but with a certain exception.
If the filename ends with .part<number>.txt, the <number> can only be one of the following, 1, 01, 001, 0001.
So I can get the URL value as the only Match from the Regular expression - but I don't understand enough about them (yet) to do this. I have seen RegEx examples that will parse any INI file and get the Name, Value Pairs I just want to get the URL value only from a file no matter what else it contains. My aim is to have something like this:
Dim _pattern As New Text.RegularExpressions.Regex("RegEx") Dim _url As String = _pattern.Match(iniContentString).Value
It seems simple but I cannot seem to create a specific case RegEx where I want everything from "URL=" to the vbCrLf at the End to be my "Match". I have refered to Regular-Expressions.info which has been a help before but still cannot get this simple example to work.
I'm attempting to build a function that will return a regex that is dynamically created.The regex to create will be a range check between two numbers. So far I've got something similar to this (not finished as yet).Is this approach valid, or is there an easier way that I'm overlooking?
Public Shared Function Range(ByVal Minimum As Integer, ByVal Maximum As Integer) As String Return "^([" & Minimum.ToString.PadLeft(2, "0") & "]" & Microsoft.VisualBasic.StrDup(Minimum.ToString.Length, "[0-9]") & "|2[0-4][0-9]|25[0-5])$"
I am trying to validate a csv file of domain names (eg. @google.com, @xyz.co.uk, @xyz.edu etc.) I am using the following Regular Expression: Regex(@"@(?:[a-zA-Z0-9-]+.)+[a-zA-Z]{2,4}$", RegexOptions.Compiled); Is there scope for improvement on the above?
Regex(@"@(?:[a-zA-Z0-9-]+.)+[a-zA-Z]{2,4}$", RegexOptions.Compiled); Using the above, I want to pass only values like @gmail.com, @xyz.edu, @co.uk etc... But I find that the values like abc@gmail.com (valid email ids) also pass through.
I am using the below Regular Expression which works fine in case of date validation. But if I select the date from the DatePicket even then it throws alert:Enter valid date. How can I modify the regular expression so as to be compatible with DatePicker.
Set RegularExpressionObject = New RegExp With RegularExpressionObject .Pattern = "^(((0?[1-9]|[12]d|3[01]).-/.-/?d{2}))|((0?[1-9]|[12]d|30).-/.-/?d{2}))|((0?[1-9]|1d|2[0-8])[.-/]0?2.-/?d{2}))|(29[.-/]0?2.-/?(0[48]|[2468][048]|[13579][26])|((16|[2468][048]|[3579][26])00)|00)))$" .IgnoreCase = True .Global = True End With [Code] .....
My coworker needs me to write him a regular expression for his vb.net app.I do not know vb and he does not know regex.The regex he needs is:/.*web id: ?(d+).*/iBasically he needs to search a string for something like "web id: 345" or "web id:2534" and retrieve the ID.He took what I gave him above and was able to put this together:
Dim strPattern As String = ".*web id: ?(d+).*" Dim strReplacement$ = "$1" GetWebId$ = Regex.Replace(LCase$(strNote$), strPattern$, strReplacement$)
How can I match the domain part only of a URI with regular expressions? I see lots of examples but the mutch the subdomain too. What I am looking to do is to capture only the domain. So, for example [URL] should match only google. As a secondary question, I am looking to implement this on a VB.NET program. Would there be some other way to do it without regular expressions?
I want a regular expression for the following issue:I want to match a string that contains A,B,C,D,E and F. string length should be 0 to 6. and not character should be repeat in the string.Example: ABCDEF, ACDEFB, EFBCDA, etc. but not ABBCDES/W Engineer