I'm trying to remove all children (and sub-children) of a Grid in WPF (I'm really new to the whole WPF business). Is there a good way of doing it programmatically? I need to do this so that I could leave an empty canvas (Grid) at one point and draw other stuff on it.
View 1 Replies
winforms .net 3.5 Ultrawingrid 9.2 In my subclass of Ultrawingrid.Ultragrid :
[Code]...
This works fine. But when the grid is dropped on a TabControl tabpage, the ctrl-tab looks very different to the sub above. e.keycode is seen as controlkey {17} I realize that by default cntrl-Tab moves between tabpages. I need to override this behavior. My thought is I probably need a subclass of the tabControl which will pass the keycombo through just as the form does but I confess to being clueless as to how to accomplish that. I tried to override the onkeydown of a tabcontrol subclass and just issuing a return and not and base call to onkeydown if the ctrl-tab combo was pressed but it seemed to see the e.keycode as controlkey as well.
[Code]...
i'm using the MVCContrib grid trying to override the start of a row and the end of a row. It's not working as advertised. This is an extract from my MVC2.0 view.
<div id="chargestable">
<br />
<% With Html.Grid(Model.InvoiceListingInformation)
.Columns(Function(column)
[code]....
The stuff i put in the begin row and end row functions is being rendered above the grid entirely.(PS i can't just use the attributes as i need to wrap the row in another html element)
i have a prob that i have a gridview on the parent window. when i open a child window using showmodaldialog, i enter some data in the textboxes. now when i close my child window i want to display the text entered by me in the grid. i want to know how can i access the grid in child window
View 1 RepliesTrying to understand the basics of grid design so how would I make a over sized grid or a grid larger then whats viewable on my screen resolution? Below is a simple chart describeing what i want to make roughly. I would like to build the grid in "blocks".[URL]..
View 16 RepliesThe below code was written to bind the datatable to the grid, but i am unable to fill the grid.I am unable to fill the datagrid. [code]
View 1 RepliesI have UltraGrid and i need when i click on grid row to get content from specific column of that grid. For example if I click in cell of fourth column then i need to get value of first column of the same row where i clicked.
View 1 RepliesThis is a VB .NET application where we are showing the output of a SQL statement in a Datagrid view. using .NET 2005.We need to get the seperators of the headers on the grid control to be the same colors as the GridColor on the form. See the picture below:We've tried looking through all of the properties of the DataGridView control, and found some interesting things that looked promising such as the DataGridViewAdvancedHeaderStyle, and DataGridViewHeaderBorderStyle, but none of it seems to allow you to change the colors on it.Does anyone know how to do this without remaking the entire thing with a GDI+ control?
View 2 RepliesIs there a simple way of tracking the change of an Mdi's children i.e. when they are created and closed, something like an event OnMdiChildListChanged (I realise this doesn't actually exist).
I am also aware that I could have a method within my Mdi that handles the creation of child forms and logs the state of them or even create an Interface that defines that a child form has a "NotifyParent" method that is then called on close of the form, but i was wondering if there was any built in events that i could plumb into?
How do you get the children of a panel?
View 3 RepliesI have four children in a parent container. Each child form is a test for the user to type correct answers into text boxes. Option to open each form is on a menu strip in the parent. In form load, I have disabled all but the first form option. I only want the second form to become available if the first form answers are correct. I would like to figure this out on my own as much as possible. I have searched on line but since I am not sure what to ask, I have not found and answer. Can someone get me started in the right direction? Perhaps some reading that would explain how to go about this, or what I should be typing into google to get what I'm looking for.
[Code]...
[code]...
I'm sifting through the dump of AniDB titles and everything works except that it only sees 7161 elements instead of 9200. Anyone have any idea why? It's not calling an exception on the load method as if something is wrong. Even when I change it to just take the root element and then get the count of children, it gives 7161. Like it doesn't even see the last 2000.
A common problem I have come across when migrating from VB6 to VB.NET is that to change the focus between MDI children, you can't just click any control to give that child focus, you must click its title bar. The solution that I have found works is to enter the child form's Designer and change the following:
Code:
#Region "Windows Form Designer generated code "
<System.Diagnostics.DebuggerNonUserCode()> Public Sub New()
MyBase.New()
'This is required by the Windows Form Designer.
InitializeComponent()
[Code] .....
This needs to be done on all child forms in the project. If one form does not have the fix, once it's opened, the bug will return even when the form is closed.
I would like to turn on an app in the background that disables or temporarily remaps all but the alphanumeric keys while they are using my laptop if possible.
View 1 RepliesI start with VB 2010 since a short time.I need to check in a Treeview if a node has children or not.In VB 6 there was the property clildren that allow to understand this.
View 1 RepliesIm new to treeviews so I hope this is not posting a problem that has been covered. I want all the children of a checked parent to also be checked. I have found various snippets that can achieve this but only for one or two levels. When I expand further than 2 levels the children are not checkeds. What am I missing? I have managed to find this piece of code that I am using in both the "AfterExpand" and the "AfterChecked" events to achieve the result. There must be a better way.
[Code]...
i make a parent and children form and when i show children form and drag into parents form , when parents is little to show the children form , parents form enables the scrollbar and then show the chilren form better , how can i do something that avoid this status ( don't show scrollbar into parents form when the children form is bigger than it)?
View 1 RepliesI'm adding rectangles to a wrap panel like this:
For i = 0 to 20
wrapPanel.children.add()
next
I would like to use this loop because I don't want to specify the limit:
Do
wrapPanel.children.add()
Loop
But how can I break the loop when the wrap panel is filled? For example the loop would stop when the wrap panel can't display a rectangle in its full height or width.
need to have a summation field in each row of a grid in visual basic. Each row needs to calculate the remaining quantity of its row and all other rows beneath it. Thus the subtotal field in the 1st row would equal the sum of the shown quantity field for the entire grid.The next row would include its value and all those beneath it. Its subtotal value would be less than the subtotal of the row above it (by the quantity value of the 1st row). My code for the grid is very simple I just can't figure out how to add this iteration.
View 3 RepliesI have an Idea but im not sure how to get started... Its a map maker... There will be a panel on the side for items and it will draw a grid and you can make a map using the items on the grid.
View 5 RepliesAs I understood , The property grid is given an object which it can manipulate by extracting its Properties using reflections.
My problem is that I have a set of Parameters that is determined during run-time , thus I can't staticly compose a class with properties to represent this set.
I have two idea in mind to solve this problem but both are complex and will probably consume lot of time , infact i will say they are not practical under my time constraints. One is to use Reflection Emit in order to define a class dynamically and the other is to dynamiclly build a C# source file and then compile it using CodeDom.
Can Property grid behave in a different manner( other then extracting the Properties of an object using reflections ) that can suite my problem?
I want to say that the reason I went to the property grid from the begining was its ability to provide realy nice Data Retrieval UI for common types.For color you autometically get a palette , For dataTime you automatically have a nice calender. I would like to get those things automatically If possible.
Visual Basic 2005 I have a DataGridView on a form. It's bound to a DataSet, and I'm working by way through the dataset doing various things to the records based on the "status". What I would like to do is scroll the grid, so that the row that the program is 'looking at' is in the middle of the grid.
View 1 RepliesI have the below code that i am trying to have two datagrids with a grid splityter in the middle. The split seems to be working fine but the issue i am having is when I populate the datagrid it is growing in height and changing the splitter instead of leaving the height alone and adding scroll bars.
What simple thing am I overlooking?
<Grid x:Name="gdHistory" Grid.Column="0" Grid.Row="2" >
<Grid.RowDefinitions>
[code].....
From code analysis (Visual studio), I got this warning:
[Code]...
The warning disappear but then the literal control isn't anymore being displayed on the page... EDIT Note that the code come from a Microsoft web page: [URL]
I need to modify a xml file (actually a .rdlc report file) and add some nodes which have a lot of children nodes (and those children nodes again have children nodes). Actually they are almost the same strucutre, like this one:
<TablixRow>
<Height>0.23622in</Height>
<TablixCells>
[Code].....
and it will add my specified NS. (like I said, XElement.Parse(string) won't add it) So now I can construct the correct node. For my second problem I still can't figure out: I can't navigate to the target node by using the element name since it won't search for correct NS.
My application creates MDI Children programatically. I have a frmBrowser as an MDI Child which I create multiple instances of. There are several other MDI children in the MDIParent. How do I only cycle through the frmBrowser MDI children?
For Each Child As frmBrowser In frmMain.MdiChildren
'perform action on child
Next Child
The code above gives an error for all the Child that aren't of the type frmBrowser.
I have two mdi children forms open. I would think that clicking on the non active form would change the focus from the active form to the form I just clicked on. It only does this if I click on the title bar. Then the focus changes. But if I click on a control on the non-active form, focus does not transfer.
View 5 RepliesI have a WPF ParentUserControl and some ChildUserControlA ChildUserControlB etc. (also WPF controls)
The ChildUserControls are controls containing on them some other basic elements (textboxes, labels, etc)
In the main form's status bar I need to display the name of the currenlty mouse overed ChildUserControl.[code]...
I want to make something similar to the listbox.children property. I know I can write this to return the children of the listbox:
[Code]...
I have an MDI application that shows a child window, obviously. I want multiple instances of this child window to be possible. However, I only get one. The first one will close out and the new one will show.
Dim newWindow As New frmWatcherWindow()
newWindow.MdiParent = Me
newWindow.Show()
