Run Form In Another Thread?
Jul 10, 2011How do I run a form that has a progress bar on a separate thread from another form?
View 1 Replies
ADVERTISEMENT
Opening Form Into New Thread Then Closing It Again From The Old Thread?
Dec 15, 2010I am currently working on a project that has a splashscreen This splash screen is designed to be shown when the main form begins to load its requirements, and then closes once it has loaded... Currently it works like so:
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
frmSplash.Show()
dolotsofloading()
frmSplash.Close()
End Sub
[Code]...
VS 2010 Error - Cross-Thread Operation Not Valid: Control TbPlaca1 Accessed From A Thread Other Than The Thread It Was Created On
Aug 13, 2010In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
Cross-thread Operation Not Valid: Control 'Panel1' Accessed From A Thread Other Than The Thread It Was Created On." ?
Nov 3, 2011This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
Error - Cross-thread Operation Not Valid: Control 'txt1' Accessed From A Thread Other Than The Thread It Was Created On
Jul 21, 2009I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
Error : Cross-thread Operation Not Valid: Control 'l_users' Accessed From A Thread Other Than The Thread It Was Created On
Jun 21, 2012When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
Threading Progress Bar In .net - Thread Operation Not Valid Control 'ProgressBar1' Accessed From A Thread Other Than The Thread It Was Created On
Feb 17, 2012Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
Waiting For Threads - Thread.join Suspend Execution Of Code On Calling Thread Until Spawned Thread Finishes Or Is Aborted
Sep 2, 2010My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
Cross-thread Operation Not Valid: Control 'Autocad' Accessed From A Thread Other Than The Thread It Was Created On
Jun 6, 2010I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
Cross-thread Operation Not Valid: Control 'label2' Accessed From A Thread Other Than The Thread It Was Created On?
Feb 9, 2011My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
Cross-thread Operation Not Valid: Control 'lblStatus' Accessed From A Thread Other Than The Thread It Was Created On
Apr 1, 2010I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
Cross-thread Operation Not Valid: Control 'statusHO' Accessed From A Thread Other Than The Thread It Was Created On
Jun 6, 2009My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
Cross-thread Operation Not Valid: Control 'lv1' Accessed From A Thread Other Than The Thread It Was Created On?
Aug 4, 2009Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
Load The Main Form Of A WPF So That A Separate Thread Goes And Gets Data From The Database While The Form Is In An Apartmentstate?
May 15, 2012How do i load the Main form of a WPF so that a seperate thread goes and gets data from the database while the form is in an apartmentstate? (drag-able / movable) I Know this is possible with opening a new window from your main form like this :
Private Sub openOrderWindow()
Dim OrderWindow As Orders = New Orders
OrderWindow.ShowDialog()
End Sub
[code]....
I've tried putting MyBase.ShowDialog() and .Show() and .9000+ other things The only benefit I've got out of using a seperate thread to load from the databse is i can see the screen right away (as oppose to it being a transparent box until it loads) but i cannot move it around or minimize it?is there any way to make it Movable while it loads?
Forms :: Main Form Minimized After Opening Form In A Different Thread?
Jun 7, 2009In the main form the user can choose to download information from a device.Since this request takes time, when "download information" is pressed I open new form in a separate thread: Private Sub RunDownload()
[Code]...
Access A Component In Form From A Thread Created In A Different Form?
Jun 18, 2011I have 2 forms main_frm and copying_frm. In main_frm, there is a list view that is populated with file names. The user then clicks save and all the files in the list are copied to a folder that they choose using a folder browser dialog. When this happens, I do copying_frm.ShowDialog() to display the copying_frm. The copying_frm contains a progress bar and a cancel button. I can get the progress bar to indicate how much has been copied. But that freezes up the application. To get around this, I create a new thread (called copyingThread) that copies the files. When that thread runs though, it can't access the waitingList_lvw in main_frm. For example, in the function that the copyingThread executes, if I have this line of code: MsgBox(main_frm.waitingList_lvw.Items.Count.ToString()) the result is 0. Also, I don't get any errors and no files are copied. How do I access waitingList_lvw in main_frm from a thread called copyThread that was created in copying_frm?
View 6 RepliesError Saying "Cross-thread Operation Not Valid: Control 'lblOnline' Accessed From A Thread Other Than The Thread It Was Created On."?
Feb 7, 2011Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
Form.Show From Another Thread Hanging Form
Jul 25, 2011I have a series of methods being called for my networking code. An event gets fired from the networking thread. Inside this event, which I've hooked into from a singleton class, I route messages to form level methods which they register on form load to handle certain messages they care about. Inside of these form message hooks I need to close the current form (which I was able to do) but also show a different one (which is giving me the trouble).
[Code]...
Form In Another Thread?
Jun 7, 2011How do I run a form that has a progress bar on a separate thread from another form?
View 1 RepliesMulti-threading Forms - Open A Separate Form As A Separate UI Thread From The Start Up Form
Oct 27, 2011I have a few forms that have a lot of really intensive updating along with a great deal of user interface (text boxes, button clicking etc) Is it possible to open a separate form as a separate UI thread from the start up form that called it to "show" or open or whatever the new method might be?
View 6 Replies.net - VB 2008 - New Form On A Different Thread?
Feb 7, 2011My "form1" is just a simple page with buttons that launch different forms which do all the work, the "form1" code for the first four buttons is below. What I want is for each form to run in a separate thread.
Public Class Main
Private Sub btnDownLoadStockPrices_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnDownLoadStockPrices.Click
LoadStocksFromDownloadSite.Visible = True
End Sub
[Code]...
I've found plenty of code examples to have different buttons on a single form run a subroutine in a separate thread, but for some reason I can't seem to apply it to an entire form.I think it's something simple, like I need to tie each new thread as a handle to each forms "load" routine, but I just can't get it to work. I don't care about "synchronizing" threads at all, as each form is really a completely different functional program.
Close Form In Thread?
Oct 16, 2010When I am inside a thread, I cannot simply call Me.Close or I get cross threading error!So I need to use some code like this and then call SetClose()
[code]...
Running A Form On Another Thread?
Apr 28, 2012what i currently have is the main form that then when a user presses a button it runs some functions that loops through some files and changes them and then copys them to another location the functions can take quite some time. what i want to is when the button is pressed it opens another form with a textbox on it and when it has finished 1 cycle of the loop is outputs a line to the textbox and tells the user weather or not it has been sucsessfull.
at the moment i have:
Dim t As Threading.Thread
t = New Threading.Thread(AddressOf Form3.Show)
t.Start()
[Code]....
Updating A Form From Different Thread?
Jun 13, 2010I have a VB.NET 2010 app I am writing that does a lot of work on a RS485 bus in 2 seperate threads. These threads are started as soon as the app is opened and run as long the app is open. I would like to have the threads update labels on the main (and only) form every so often based on what's happening on the serial bus. I know it involves invokes and delegates but I haven't found a straight forward answer on how to implement it.
View 5 RepliesAdd Items To Another Form's Listbox From A Thread?
Apr 6, 2011'Form 1- start a new thread and declare a new second form. Have it invoke before adding an entry. as this apart from "CheckForIllegalCrossThreadCalls = false" is a workaround.
Code:
Public Class Form1
Dim t As New Thread(AddressOf startanew)
Private Sub startanew()
[Code].....
Avoiding Updating A Form From A Thread?
Sep 8, 2009I've seen a good bit written on avoiding updating a form from a thread.However,I was wondering if that was a problem if the thread exists in an object that programatically builds the form?Thus the form and associated logic exist within the same "thread space." Seems on the face of it like it would work since everything in the form should be in a single dispatch queue.
View 8 RepliesChange Text In Different Form Using A Thread?
Nov 16, 2011How do I change the text of a label in a different form when using a thread?[code].....
View 5 RepliesClosing A Form Running In A Different Thread
Sep 6, 2011I have form1 and form2. A button on Form1 calls a thread background process (below). That process processes the command and when its done should close form2. I'm opening form2 within the current thread but trying to close it in the background thread. This is because if i close it in the current thread it closes immediately. I included the 2 functions below and what I have tried in the inline comments. Form2 is a simple form, basically just an animated gif. It is to show the user that something is happening(like a status bar) then close when its complete. I tried running different priorities instead of different threads but due to the results threading seems to behave the best. I'd like to keep access to both forms during the process, the pc, and screen refreshes realtime.[code]
View 2 RepliesCreate New Form On Separate Thread?
Jan 10, 2010I would like my application to do something (in one form) and while form is doing that i would like to show another form to the user. Code is:
Private Sub blaa()
Dim a As New Working() 'working is another form
a.Show()
'Do some stuff
a.Close()
End Sub
But when i make new form i find it is on the same (main thread) and therefore new form also frozes. How to make new form on separate thread?
Create Progressbar In Second Form Using Thread?
Dec 10, 2010I read several posts but I didn't still find solution on my problem I created 2 forms: first is main where I do operations on excel file with 20000 rows and in second form I created progressbar. the name of main form is form1.vb and the name of second one is wait.vb In main form I wrote:
[Code]...
