Private Sub Form_Load()
datReg.Recordset.MoveLast
End Sub
I want to show the last record after the form is opened but I got this error :
Run-time error '91': Object variable or with block variable not set
I have been working on a project of mine that will streamline some issues at the office. (Note: There is not much in way of documentation or comments as I just started on this)
This is what I have so far and I am getting this error:
"System.ObjectDisposedException was unhandled"
I can edit the database with the second form initally, but it pops up an error after I return to Form1 and then attempt to enter into the 2nd form any subsequent time after the first initial load.
Here is my code:
Option Strict On
Option Explicit On
Public Class Form1
[Code].....
Why my form loads takes time the first time I clicked the menu to load it (I even see not responding on the title bar), but when it is already loaded, I will close it and clicked the menu to load it again then it load fast already....
Here is what I have in my declaration section
Private cnn As New SqlConnection(My.Settings.MyConnectionString)
Dim cmdLocked As New SqlCommand
Dim daGrade As New SqlDataAdapter
Dim daLocked As New SqlDataAdapter
Dim builder As New SqlCommandBuilder
[Code] .....
Im having 2 errors when loading the form the first one is: "The connection was not closed. The connection's current state is open" and the another one says "Conversion from string "" to type 'integer' is not valid" and everytime I change cmb_Suc appears: "The connection was not closed. The connection's current state is open" [Code]
View 5 RepliesMy startup form displays a login box and then, upon successful login, displays a series of buttons. One of the buttons displays a form named Calculator using the following
[code]...
When stepping through the code after clicking the button that calls the above code, it gets Calculator.Show and then jumps to code on the Calculator form that fires when a checkbox on he Calculator form changes checked state, apparently bypassing the Calculator_Load procedure altogether.This eventually results in the following error:{"An error occurred creating the form. See Exception.InnerException for details. The error is: Conversion from string "" to type 'Double' is not valid."}With the IDE claiming the error is occurring on the Calculator.Show() line on the previous form. Clicking the button a second time causes the form to load as expected, with everything working corectly.The load procedure header is:Private Sub Calculator_Load(sender As System.Object , e As System.EventArgs) Handles MyBase.Load Am I missing something in here that would cause that not to fire first upon a Form.Show call?Possibly relevant is the fact that I renamed the Calculator form prior to the problem arising, but I've searched for the old name and there are no vestiges of code still referring to it by that name. I also tried renaming the form back to the old name, but that didn't fix the problem either. (Plus I seem to recall having ran the application several times after the name change before the error was encountered, so I don't think this is relevant but didn't want to leave it out, just in case.)
We are testing some code to send email messages using Gmail from a form, but get a time out error.
Can you tell us what is missing from this code to get the email message sent?
Try
Dim SmtpServer As New SmtpClient()
Dim mail As New MailMessage()
SmtpServer.EnableSsl = True
SmtpServer.Credentials = New Net.NetworkCredential("ouremail@gmail.com", "MyPasswordGoesHere")
SmtpServer.Port = 465
[Code]...
When I run my .net application exe .It takes time while loading first time How can I reduce a loading time of my application exe ?
View 6 RepliesI was currently writting a Cyber Cafe for the client side which start up with a form that maximize and block all the client control like shortcut key and other security. It's fine to work in my pc and it take only about 5 second to startup the application and lock the client. But when i run the application in a pc that installed with games, it took about 40 second to run my apllication. I notice in task manager panel, the process need to read the whole application before it could load my first form. Is there any idea i can speed up my loading time? I have try to set the process priority to "real time" and startup using batch files, but it still need 30 second to load my first form.
View 4 RepliesWhen I run my .net application exe .It takes time while loading How can i reduce a loading time of my application exe.
View 2 RepliesIm Using VB 2008. I have MsgBox() statements in all Mouse & Form Click events to TEST & NOTHING FIRES during Form Load when I click on Form or Button Controls !!! The Form Load event contains code for Displaying the Label.Text control many times with changes in the Text to simmulate annimation.
[Code]...
I'm learning to write text file from a Listbox and DataGridView, and read from it.Everything works fine until I have a small problem with reading file into DataGridView. The problem I concern is about time. For example, in my text file, I have Arrival Date & Arrival Time, but when I display it in table it is something like below:[code]
View 3 RepliesI'm trying to force an always maximize setting
View 1 RepliesI like to make an console application to measure the time it takes to fully load a web page, what's the best approach to do that? The purpose of this small app is to monitor some pages in a website, in a predetermined interval, in order to be able to know beforehand if something is going wrong with the webserver or the database server. It would be nice to be able to measure the time it takes to fully load the the page (images, css, javascript, etc). I have some code but I is not measuring the fully page.
Dim sw As New System.Diagnostics.Stopwatch
Dim req As System.Net.HttpWebRequest = CType(HttpWebRequest.Create("[URL]"), HttpWebRequest)
sw.Start()
Dim res As System.Net.HttpWebResponse = CType(req.GetResponse(), HttpWebResponse)
sw.Stop()
Dim timeToLoad As TimeSpan = sw.Elapsed
I made two applications the first one calls the other. But the other application takes time to load. Even on a fast Pc. So i was thinking of adding a loading form to it. For example when the other application is done loading the loading form goes away.
[Code]...
I have combo box being filled with more than 50 thousand records. it is getting sometime to load and bind the data. I am using datatable to bind the data. I tried using data-reader as well but in vain.
View 3 Repliesat the time of recoredset movenext out of memory error occured in run time data have 3800000 lakh recored
View 2 RepliesI get an error "vb6 compiler gives an error Error in loading dll" and the compiler point to code line with "If Request.Form("EDAServerName") <> "" Then" and the word Request hilited. I searched many places with no help. Does any one know of resolution ??
View 2 RepliesAn application generates a runtime excpetion saying "Cound not load file or assembly 'CustomMarshalers, Version = 2.0.0.0, Culture = Neutral,PublicKeyToken=b03f5f11d50a3a' of or one of its dependacies. The system cannot dind the file specified.'This application is written in .net but is calling interop assemblies for SHDocvw and tool is running on XP.this application works fine on other users desktops. Earlier the same user was able to run the application on the same machine... it could be that security patches installed later is causing this.But are there any known resolutions for this error message
View 4 RepliesI am having a problem, which I did not have until recenty, adding personal macro buttons to the Quick Access Toolbar using Excel's Customize function. The macros, which I know are, enabled and executable, cannot be assigned to new buttons on the QAT. Actually, I can add macro buttons to a new workbook fine, but when I close, reopen the workbook, and try to add another personal macro button, they all disappear.
I set 'Show Add-in User Interface Errors' in the Advanced tab of Excel Options and get this error when I open a workbook with personal macro buttons added to the QAT[code]...
I deleted the macros and manually keyed some simple command (msgbox 1) into a new macro and still got this error message.
I set 'Show Add-In User Interface Errors' on a remote server (where I do not have this problem) and I do not get this error message when loading workbooks with customized QAT.
I'm trying to load data into a DGV row at a time from a dataset and keep getting the following error on the highlighted line.
Private Sub LoadClientGrid()
Try
grdClientList.Rows.Clear()
For Each row As DataRow In rsClientGrid.Tables("tblClients").Rows
Dim grdRow As New DataGridViewRow
[Code] .....
I am using this line of code on form load event it is working very fine but i have to problems
1. It replaces the form name and display the date and time but i want to keep both date and time and forms caption separated by some space.
2. When form loads it load the current date and time but the time does not change it should run.
What should i do please please help me code is as follows
Me.Text = Date.Now.ToLongDateString & " - " & TimeOfDay
Is there a way to turn off all visual updates to a .NET form while I am manipulating it? When my program first loads, for example, I set the tab control to the tab that was last open. The user can see the program switching tabs.
I have looked into SuspendLayout and ResumeLayout, but either I don't understand what they are doing, or I am not using them correctly, because they don't seem to have any effect. Someone told me that there used to be a way to turn off paint events in VB 6. Does this still exist in .NET?
I have 2 forms. When a user clicks something on form1, form2 pops up. After user is done with form2 and closes it (where the dataset is updated), I want form1 to "reload" the dataset to reflect changes made in form2.
View 1 Repliesim trying to load a database and I get this error.
View 3 RepliesError While Loading Dialog Window [code]...
View 7 RepliesWhen I right click on the ToolBox and click on Choose Items Error while loading property page comes up, and my toolbox is disabled, Also in the output this text appears:The Windows Forms Designer Package ({7494682B-37A0-11D2-A273-00C04F8EF4FF}) did not load because of previous errors. For assistance, contact the package vendor. To attempt to load this package again, type 'VBExpress /resetskippkgs' at the command prompt.
View 10 RepliesNow I need to avoid exception error for when I move, minimize and close any of the other 3 forms for the program I am building. ZOrder?. I was thinking of using an if statement to determine the zorder of each form. I need to know how to implement the if statement.
Option Explicit On
'Route User to the desired page
Public Class Form1
[Code]....
i am writing a simple games client using an XNA 2.0 engine to play games. The games are written in dll files and the client uses the assembly.loadfrom method to read and execute the games accordingly...Now this all works fine on my computer and my laptop. However when i give it to my friend he gets this error and the dll doesnt load - "Unable to load one or more of the requested types. Retrieve the loader exceptions property for more information"
View 1 RepliesI am programming in VB9 WPF and Blend 3. I was working on a program in Blend 3; I can work on all my forms and everything runs fine in Blend, but when I opened it in VS the WFP forms would not display (I have five of them in my program and they all have the same problem in Visual Studio.), but I can run the program in VS, see the forms in run mode, and work on the code behind with no problem. I can't determine what is causing the WPF forms error in VS. It appears I have a "ResourceDictionary_4 error, but I cannot locate that dictionary in either Visual Studio or Blend. I even tried searching my entire computer and can't find any trace of it. Are there any ideas as to how do I solve this problem? The error messages I am getting are:
[Code]...
I am loading data from an excel sheet using the following code.The first test I did worked fine.But when I tried another sheet it errored on a cell that was blank"Object reference not set to an instance of an object".Even though the sheet in the first test had blank cells.I need the loop to load the blank cell in the datatable
For nRow = 1 To objSheet.UsedRange.Rows.Count - 1
dr = dt.NewRow
For nCol = 0 To objSheet.UsedRange.Columns.Count - 1
[code]...