I get the error (Run-time error '429' ActiveX component can't create object) when I execute my VB 6.0 program on Windows server 2003 BUT not on Windows XP Professional.The code that causes error is: Set wrkJet = CreateWorkspace("", "admin", "", dbUseJet)
View 18 RepliesMy dot net windows application (visual studio 2008, vb.net) is running fine on 32 bit windows XP. But in 64 bit windows 7 it is throwing the following error when trying to open frorms which have a reference to GCombo.dll."Run-time error '429': ActiveX component can't create object"The application was originally on vb6. It was converted into vb.net. I build the application in x86 mode. I have registered the dll manually. But nothing worked.
View 2 RepliesI have a vbscript that tries to create an object of msmq but I am keep getting an error that ActiveX componet cant create object. I have msmq installed and queues are there but cant create an object.
View 2 RepliesI am getting a run-time error within my VB app:
Run-time error '429': ActiveX component can't create object
I have run this application under WinXP and previous Windows operating system fine, but when I installed my application on Windows Vista I get the above error at run-time.
how I could resolve this error as I believe it is not a programming error as the app works on other Windows OS's fine. Could it be something to do with registering dll's etc.
I am getting a run-time error within my VB app: Run-time error '429': ActiveX component can't create object. It goes away after IIS reset.
View 5 RepliesOur VB.NET application has a .NET dll, with a registered TLB file; so that VBA in Microsoft Word and Microsoft Excel can call into the application. The application functions correctly except when it is called into via MSO on Vista. This functions correctly on Windows XP machines but on Windows Vista and Windows 7 machines it is returning a 429 error. A reference to the TLB file can be assigned in the VBA References dialog box, on Vista.It doesn't appear to be a problem in our application as a simple Test libary does the same thing. Microsoft Applications have been 'Run As' Adminstrator, and Vista UAC is turned off, but I am thinking there is perhaps a security issue?
View 1 RepliesSource File: MathNet.dll
Output file: MathNet.tlb
Included Classes MathNet.Division and MathNet.Multiplication
[code].....
I am trying to write an VBA application in Excel 2010 using "Microsoft Soap Toolkit 3.0" on 64 bit Windows 7 to consume an web service. But i got an error while initializing an object of SoapClient30.
Error message is :: Runtime error '429' :ActiveX component can't create object.
I am getting error : ActiveX component can't create object. Actually I have VB6 Dlls where business logic is reside and I am calling that dll function in my vb.net application , all dlls are dependent on other dlls.I am getting the error from one of the dlls
View 4 RepliesI have VB6 ActiveXDLL called A.dll , I am referencing this DLL into my VB.Net Application.Now I am calling a function of A.dll in this project. A.dll function is referring to the function of B.dll ,C.dll ,C.dll further referrer to Z.dll and so on.when I am executing application it gives an error from B.dll that ActiveX component can,t create an object.
View 4 RepliesI created a VB.NET web site that must use an existing VB6 dll. In the VB.NET code, I use the dll like this:
Dim objTEST As CAPObject.TESTCls
"CAPObject.TESTCls")
objTEST.SetDefaults()
[code].....
Previously this was not problem on XP/Vista (with minor changes), but windows 7 (64bit), is having issue's and I thought it might be how I'm implementing this time around? This is the original version just gives a com exception error of {"Cannot create ActiveX component."} [Code]
View 1 RepliesI didnt know if this was the correct location to post this kind of question. My code is in C# however I am using the visualBasic. Interaction. CreateObject to connect to a OCX file. I notice that this works great for a while but if it continues to do its job for lets say a few days then I get and exception... "Can not create an ActiveX component." I am 100% sure that the ocx and dlls are registed correctly to the system.
View 2 RepliesI am using the following code to send an email thru Outlook 2003:
Dim omsg As Object
Dim oRcp As Object
Dim objCDO As MAPI.Session
[Code].....
I am develpoing a small vb.net forms application. From that trying to load the Autocad using the following code.[code]When creating the application for first time, it works fine. Loads the Autocad correctly. But for second time if run the application the following runtime error is occuring. "Cannot create ActiveX component" at the CreateObject line.I cant predict what is the problem. I've included the following references in my program.[code]
View 1 RepliesI am developing a VB2008 application that makes use of the Office Access runtime.I started development on Win7 64-bit & Visa 32-bit machines.The application runs just fine on the machines with VB2008 installed.I have used a number of tools to build the application installation and I am running into the same thing on all target test machines (currently XP Pro).The system fails when the Office Access portion of the code starts to run.Below is the Just-In-Time debug info.
I also notice that .NET 2 is being called.Is it wise to make .Net3x the preferred .Net client?In the application, I have specificed .Net3 (however, it does not look like it is being called).The target test machine (XP Pro) has .Net 2.3 and 4 installed.See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Exception: Cannot create ActiveX component.[code].....
I am attempting to learn how to develop applications to interact with the Autonomy WorkSite 8.5 server and have found the WorkSite DB Administrators COM Developers Reference Guide, it has helped me somewhat and I can now see the types of objects that I can interface with, however I am stumbling on showing the members of a group. [Code] Can anyone offer any assistance on this problem? I have read on page 21 of the DB Admin COM guide that it mentions to execute iManAdmin - REGSERVER from the command prompt, however this will not work for me with Windows reporting that the file doesn't have a open with program set. I am running Windows 7 64bit.
View 1 RepliesI have a DLL that utilizes the Redemption Outlook Library. This is included in the DLL's Reference on the Project Properties Tab. This is a DLL that I wrote and one of its newest features is its ability to send an email.This DLL is called by a Click-Once program that has a GUI. When the program called the DLL and at the point of sending the email....I receive the "Cannot create ActiveX Component" error. So, in the Click-Once application, I also referenced the Redemption Outlook Library thinking that would fix the problem but it didn't. The Click-Once app resides on a server with other Click-Once apps. In it's irectory structure the DLL is also present and now....so is the Redemption Outlook Library DLL. I'm all out of ideas. Here is the code that sends the emails below.
Private Sub SendEmailToUser()
Try
Dim Application = CreateObject("Outlook.Application")
[code].....
I'm my program always fails at the same line:
objUser = GetObject("LDAP://CN=" & strUser & "," & ADPath)
If I reduce the code down to just this:
objUser = GetObject(), I still get this exception:
"Cannot create ActiveX component."
After googling this for about 18 hours, I found that it could be because of a permissions issue. I am a local administrator on the PC, so I believe that takes care of permissions. Secondly, I discovered that the dll file might not be registered. I tried to use the following command to register the dll file I think is being used:
regsvr32 "c:windowssystem32wldap32.dll"
It says the following:
Error - The module "C:windowssystem32wldap32.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that "c:windowssystem32wldap32.dll" is a valid DLL or OCX file and then try again.So no matter what I try to do, I keep getting this unhandled exception error that says that it cannot create the activex component. What do I need to do to be able to use this getObject() command? Is the problem with LDAP? What activeX or DLL file is failing if even just running the getObject command gives an exception?
I am trying to load an actixex component in a VB project which was made in Visual C++.n VBA it works fine.In VB6, when I try to load the component on the toolbox I get an "Error 35005"In VB2008 the component can be added to the toolbox, but when I try to place it on the form, the following error occurs: "Failed to import ActiveX control. Please ensure it is properly registered."
View 1 RepliesI am working on a VB2008 Express application that makes used of the office interop access. The exact code is:
[Code]...
I have one problem in vb6. I created a .tlb file in VB.net 2005 by adding Com class to project. I built the project, I got .tlb file and .dll files while building project, i selected "Register for Com interop" from project properties and built. It registered autometically and I can use created .tlb file in that PC in Vb6 working fine. if I deploy application to another PC and run I am getting "Error 429 ActiveX Component Can't create object" run time error. What I need to do? Please help me as soon as possible. I can't deploy the application to client due to above error.
View 2 RepliesI have read some of the other posts on this and seem to be a little different than my situation. Trying to print out some reports into an excel document on the clients machine - of course it works fine on my local (heard that before right). I went in and set my references Ms.Office.Core and Ms.Office.Interop.Excel to 'Copy Local' = True so the .dll are in the servers bin folder.
[Code]...
My app is a classic vb6 app. I have distilled my problem down to fact that an activeX control can't be registered on Win 2008 64 Bit using Regsvr32 but can be registered on Win 2008 32 bit and on Windows 7, Vista, XP/Pro, Win 2000 etc. The classic vb6 app works well on every Microsoft platform except Win 2008 64 Bit. Some Win 2008 64 Bit systems seem to work and we're not sure why, but many don't. The application fails with 429 error when run and when you try to manually register the activex component using regsvr32, the registration process hangs with this result[code]...
View 2 RepliesI have created a reference to an activex com component in my project and I am wondering how I now get the program to open the active x form, I have got a GetObject function but the error is "cannot create activex component". Is there a way to call an active x .exe file so that the file opens?
View 5 RepliesI am trying to build a windows service application that uses an OCX component (non graphical). Creating the service is easy. In order for the OCX component to be used it must be loaded on a hidden form using the STA threading model. Creating a thread with STA is easy. In the thread function I created my hidden form holding the OCX and called the ShowDialog() method to have it load. The problem is that the form_load event is not called. The form constructor is called though.
I know that a windows service cannot have a gui but is it possible to have a hidden form? Maybe the problem is the ShowDialog() call? However if I don't do that then the thread terminates immediately. Maybe there is no message pumping loop? Since there is no "application" object I can't use application.run on the form. Basically, I am trying to have another thread manage it's own forms using its own message loop. Is this feasible?
Trying to run this piece of code and i get the error cannot create activex component.works fine on windows 2003,works fine on windows 2008 if user is logged in with admin access.
View 5 Repliescome years ago I bought an activex component to read some basic smartcard data. I created a simple form application and it has worked fine ever since. However, instate of a form application I now want to create a console application for the same purpose (the forms are unrequired and it just takes too long with multiple smartcards).
But I have been working on this for days now and somehow can't seem to get my events working. When I use 1 event, everything works fine, but as soon as I add my second event I get this error:
Unhandled Exception: System.Runtime.InteropServices.COMException (0x80040202): E
xception from HRESULT: 0x80040202
at System.Runtime.InteropServices.ComTypes.IConnectionPoint.Advise(Object pUn
kSink, Int32& pdwCookie)
[Code]...
Trying to create an application where the objects in a form are created during Form.Load depending on the content in an ini-file.The objects I have in mind are textboxes and labels for a start.
View 5 RepliesI get this error in this code:
Private Sub Request_Stuff_button_Click()
Call Main.createObjects
Call My_Control.requestStuff
End Sub
at the 'Call My_Control.requestStuff' line.The 'Main' module looks like this:Public My_Control As ControlObject
[Code]...
right before the line that gets me the error, x gets the correct value right before the error happens which means My_Control is definitely an object and is definitely not nothing.