Trying to run this piece of code and i get the error cannot create activex component.works fine on windows 2003,works fine on windows 2008 if user is logged in with admin access.
View 5 RepliesI'm my program always fails at the same line:
objUser = GetObject("LDAP://CN=" & strUser & "," & ADPath)
If I reduce the code down to just this:
objUser = GetObject(), I still get this exception:
"Cannot create ActiveX component."
After googling this for about 18 hours, I found that it could be because of a permissions issue. I am a local administrator on the PC, so I believe that takes care of permissions. Secondly, I discovered that the dll file might not be registered. I tried to use the following command to register the dll file I think is being used:
regsvr32 "c:windowssystem32wldap32.dll"
It says the following:
Error - The module "C:windowssystem32wldap32.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that "c:windowssystem32wldap32.dll" is a valid DLL or OCX file and then try again.So no matter what I try to do, I keep getting this unhandled exception error that says that it cannot create the activex component. What do I need to do to be able to use this getObject() command? Is the problem with LDAP? What activeX or DLL file is failing if even just running the getObject command gives an exception?
I am trying to write an VBA application in Excel 2010 using "Microsoft Soap Toolkit 3.0" on 64 bit Windows 7 to consume an web service. But i got an error while initializing an object of SoapClient30.
Error message is :: Runtime error '429' :ActiveX component can't create object.
I am getting error : ActiveX component can't create object. Actually I have VB6 Dlls where business logic is reside and I am calling that dll function in my vb.net application , all dlls are dependent on other dlls.I am getting the error from one of the dlls
View 4 RepliesI have VB6 ActiveXDLL called A.dll , I am referencing this DLL into my VB.Net Application.Now I am calling a function of A.dll in this project. A.dll function is referring to the function of B.dll ,C.dll ,C.dll further referrer to Z.dll and so on.when I am executing application it gives an error from B.dll that ActiveX component can,t create an object.
View 4 RepliesI have a vbscript that tries to create an object of msmq but I am keep getting an error that ActiveX componet cant create object. I have msmq installed and queues are there but cant create an object.
View 2 RepliesI am getting a run-time error within my VB app:
Run-time error '429': ActiveX component can't create object
I have run this application under WinXP and previous Windows operating system fine, but when I installed my application on Windows Vista I get the above error at run-time.
how I could resolve this error as I believe it is not a programming error as the app works on other Windows OS's fine. Could it be something to do with registering dll's etc.
I get the error (Run-time error '429' ActiveX component can't create object) when I execute my VB 6.0 program on Windows server 2003 BUT not on Windows XP Professional.The code that causes error is: Set wrkJet = CreateWorkspace("", "admin", "", dbUseJet)
View 18 RepliesMy dot net windows application (visual studio 2008, vb.net) is running fine on 32 bit windows XP. But in 64 bit windows 7 it is throwing the following error when trying to open frorms which have a reference to GCombo.dll."Run-time error '429': ActiveX component can't create object"The application was originally on vb6. It was converted into vb.net. I build the application in x86 mode. I have registered the dll manually. But nothing worked.
View 2 RepliesI have this problem that just recently started happening.I've created this snippet that isolates the problem, which is basically, the same VBScript that used to return all of my users from Active Directory, now only returns the first 100 users.If I filter by group, then i get all of the groups (which is more than 100).The problem started happening last November, then went away for a while and has come back.The server guys tell me that nothing should have changed there.When I run this script for various domains, i get a numbered list of just the first 100 users.I'm running this on IIS (which hasn't changed)[code]
View 2 RepliesI am getting a run-time error within my VB app: Run-time error '429': ActiveX component can't create object. It goes away after IIS reset.
View 5 RepliesOur VB.NET application has a .NET dll, with a registered TLB file; so that VBA in Microsoft Word and Microsoft Excel can call into the application. The application functions correctly except when it is called into via MSO on Vista. This functions correctly on Windows XP machines but on Windows Vista and Windows 7 machines it is returning a 429 error. A reference to the TLB file can be assigned in the VBA References dialog box, on Vista.It doesn't appear to be a problem in our application as a simple Test libary does the same thing. Microsoft Applications have been 'Run As' Adminstrator, and Vista UAC is turned off, but I am thinking there is perhaps a security issue?
View 1 RepliesSource File: MathNet.dll
Output file: MathNet.tlb
Included Classes MathNet.Division and MathNet.Multiplication
[code].....
I am trying to connect to an running instance of activex component in IE.I am using following piece of code. However, I am getting error 429 "Cant create activexobject"
Dim obj As Object
Set obj = GetObject(, "MyTimer.ctlTimer")
I have an ActiveX object converted to be functional to WPF (standard procedure: Windows Forms control Library and then embedded into the WPF project using a Windows Forms Host controller). Everything works ok with a simple bug from time to time.I have some things in the Load Event that access the ActiveX controll properties and sometimes I get the error "Exception of type 'System.Windows.Forms.AxHost+InvalidActiveXStateException' was thrown."I guess this happens because the control didn't load before I'm trying to access the properties. That's why I put my properties on a DispatcherTimer with the interval 2 seconds in order to execute them later but I get the same error.
[Code]...
I have a webpage that contains an ActiveX object, called object1, and a javascript function, called alertMe(input). I wish that if user clicks on different location on object1, it will call the javascript function. Is it possible to do this? If it's possible, how should I write the calling in the ActiveX object?
View 1 RepliesI am trying to create an ActiveX.DLL file. I have created them before with VB 5.0. However, I can't find this option in Visual Basic 2010. Has it been renamed?
View 1 RepliesI didnt know if this was the correct location to post this kind of question. My code is in C# however I am using the visualBasic. Interaction. CreateObject to connect to a OCX file. I notice that this works great for a while but if it continues to do its job for lets say a few days then I get and exception... "Can not create an ActiveX component." I am 100% sure that the ocx and dlls are registed correctly to the system.
View 2 RepliesI am using the following code to send an email thru Outlook 2003:
Dim omsg As Object
Dim oRcp As Object
Dim objCDO As MAPI.Session
[Code].....
Working on getting a legacy app up and running again for work. I'm getting an error at run time that I can't create an activeX control. The suspect call is
oSQL = CreateObject("SQLDMO.SQLServer2")
I did a bit of googling and found that SQLDMO should be in a SQLDMO.dll. I've got that DLL referenced in my project but it is still failing.
I wrote an app that writes to an excel file. It works fine on my computer. I create the install through VS2008 and it adds the needed files such as the office dll files. After installing it on another machine it shows it cannot create activex. Does excel need to be installed on the machine? Or is this another type of error?
View 2 RepliesI am develpoing a small vb.net forms application. From that trying to load the Autocad using the following code.[code]When creating the application for first time, it works fine. Loads the Autocad correctly. But for second time if run the application the following runtime error is occuring. "Cannot create ActiveX component" at the CreateObject line.I cant predict what is the problem. I've included the following references in my program.[code]
View 1 RepliesI am developing a VB2008 application that makes use of the Office Access runtime.I started development on Win7 64-bit & Visa 32-bit machines.The application runs just fine on the machines with VB2008 installed.I have used a number of tools to build the application installation and I am running into the same thing on all target test machines (currently XP Pro).The system fails when the Office Access portion of the code starts to run.Below is the Just-In-Time debug info.
I also notice that .NET 2 is being called.Is it wise to make .Net3x the preferred .Net client?In the application, I have specificed .Net3 (however, it does not look like it is being called).The target test machine (XP Pro) has .Net 2.3 and 4 installed.See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Exception: Cannot create ActiveX component.[code].....
I created a VB.NET web site that must use an existing VB6 dll. In the VB.NET code, I use the dll like this:
Dim objTEST As CAPObject.TESTCls
"CAPObject.TESTCls")
objTEST.SetDefaults()
[code].....
I am troubleshooting a program that normally works, and has worked in the past on the machine I am working with.I am a very novice programmer, I didn't program this myself I am just trying to get it to work.I have done as much research as I can, which has lead me to believe it is permissions problem with the CreateObject command.I have tried a fix in the .net 2.0 machine.config file, changing the processModel user to System, that didn't help.The machine does have norton on it, and norton was installed since the program stopped working. However I have tried disabling norton and running the program. A friend suggested it might be some settings on the computer that Norton changed hence disabling it not helping.Here is the error:See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.[code]... When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replieshow to creat activex controls just like osenxpsuite
View 1 RepliesI am attempting to learn how to develop applications to interact with the Autonomy WorkSite 8.5 server and have found the WorkSite DB Administrators COM Developers Reference Guide, it has helped me somewhat and I can now see the types of objects that I can interface with, however I am stumbling on showing the members of a group. [Code] Can anyone offer any assistance on this problem? I have read on page 21 of the DB Admin COM guide that it mentions to execute iManAdmin - REGSERVER from the command prompt, however this will not work for me with Windows reporting that the file doesn't have a open with program set. I am running Windows 7 64bit.
View 1 RepliesI have a DLL that utilizes the Redemption Outlook Library. This is included in the DLL's Reference on the Project Properties Tab. This is a DLL that I wrote and one of its newest features is its ability to send an email.This DLL is called by a Click-Once program that has a GUI. When the program called the DLL and at the point of sending the email....I receive the "Cannot create ActiveX Component" error. So, in the Click-Once application, I also referenced the Redemption Outlook Library thinking that would fix the problem but it didn't. The Click-Once app resides on a server with other Click-Once apps. In it's irectory structure the DLL is also present and now....so is the Redemption Outlook Library DLL. I'm all out of ideas. Here is the code that sends the emails below.
Private Sub SendEmailToUser()
Try
Dim Application = CreateObject("Outlook.Application")
[code].....
I am trying to load an actixex component in a VB project which was made in Visual C++.n VBA it works fine.In VB6, when I try to load the component on the toolbox I get an "Error 35005"In VB2008 the component can be added to the toolbox, but when I try to place it on the form, the following error occurs: "Failed to import ActiveX control. Please ensure it is properly registered."
View 1 RepliesHow to Resolve following Error in .netNon-modal forms cannot be displayed in this host application from an ActiveX DLL, ActiveX Control, or Property Page.
View 1 Replies