I recently try to make a text editor, but when I try to save what I entered in "RichTextBox1" to a text file, it will save it as a line only.Mean if the "richtextbox1" like this:
QuoteHello
World
What the program save for me is like this:
QuoteHelloWorld
This is my code for saving the file:
Dim sfd As New SaveFileDialog
sfd.FileName = ""
sfd.Filter = "All Files (*.*)|*.*|Batch Files (*.bat;*.cmd)|*.bat;*.cmd|VBscript (*.vbs)|*.vbs"
sfd.ShowDialog()
I've been looking through the FCL for a method that will allow me to erase a line of text from a text file and replace it with another line of text. Neither the StreamReader nor StreamWriter have a method for replacing or removing Text from a text file, as does the string object. Are there any available methods for erasing just certain lines of text from a file, and then replacing them with others?
In my code, I'd like to locate a certain line in the text file, and then at that point in the text file, use a For...Next Loop to replace each successive line of the text file with new text:
Dim user_data_file As String = "user_data.txt" edit_input = New StreamReader(user_data_file) Dim edit_line As String = edit_input.ReadLine
[CODE]...
However, I can't find any methods that will allow me to do this.
Its a League Organizer, basicly ive started it off with 16 teams and end up with 1(winner) 16 box's on the far left, then 8, then 4, then 2, then 1. the 16 box's have "Team 1" "Team 2" etc... ive put a new/clear/open/save button in that order.
BUT this is my problem..when i save(Save Button) the text file saves all the text wrong it ends up like this...Team 1Team 2Team 3Team 4 Etc...
But i want it to save like this
Team 1 Team 2 Team 3 Team 4 Etc...
The code is...
Dim Save As New SaveFileDialog Save.Filter = "Text Files (*.txt)|*.txt|ALL FILES (*.*)|*.*"
Basically what I'm trying to do is read a text file line by line. After each line is read, it will put each line into a separate text box. I've been trying to do this for a while and so far I haven't been able to. I tried using a for loop, but that just put all my lines in to one textbox.
I've been writing a weight program for flooded pressure vessels and I'm having trouble retrieving the data from the text files I've been saving. I know how to write the data to the text file, but retrieving it with OpenFileDialog is not so easy for me.The user has individual text boxes that they input strings or numbers into and when they save the file, each text box input is written to one line in the text file. For example, the first text box is for the username, therefore the first line of text that is saved is the person's name, the second text box is the customer, thus the second line in the text file is the customer name, and so on.
(Actually, the first line of text in the saved file designates whether English units were used or Metric units because when the user retrieves the saved file, English units will open one form and Metric units will open a separate form, so some If...Then statement will need to occur).I need to be able to read the first line, have either my "EnglishForm"form open or my "MetricForm" form open, and then have each subsequent line of text be displayed in their corresponding text boxes. I know I need to use ReadLine or LineInput, but I don't have a clue what to do.Assuming the syntax I've displayed below would just magically work (if only life were that easy), it would look something like this
If FirstLineOfTextInFile = "English" Then EnglishForm.Show() ElseIf FirstLineOfTextInFile = "Metric" Then[code]....
And so on...I read a lot of articles from the MSDN library and exhausted each link that I've looked through from Google and Bing, but most only retrieve data from the file to a single text box through some loop or streamreader and don't take into account multiple forms.
I have this Quiz software that lets you create online multiple choice quizzes which are great for studying (I am in grad school and I'm trying to use everything I can to learn). So the Quiz software is great but it only lets you input questions by hand, one by one. I took a look at the .xml file that the quiz program spits out and came up with the idea to try and make a converter so that I can import many questions at once. I was hoping to try and solve this limitation by doing the following:
Take a .doc that say a tutor gives us with a bunch of practice questions, and then take that into Crimson Editor, and then format it so the question is on line 1, the multiple choice answers are on lines 3,4,5, and 6, (for the next question, the question would be on line 11, and the answers on lines 13, 14, 15, and 16, and so on) and then take that saved .txt file into my program, hit the generate button, and it will spit out the .xml file, and then import that into the quiz software to generate the online quiz.
Here is an attached screenshot of my program layout so far:
I figured out how to open a text file by watching simple youtube tutorials, but I don't know how to have it generate the stuff and have it show up in the bottom text box. I know how to do the coding to convert the txt to proper xml code but I don't know how to be able to save the contents of the bottom text window to an xml file.
I save data from datagridview to text file. I also load the same data from text file into datagridview for edit and update the same thing to text file. Let say this text file i called as Drill.txt. I have another text file called header.txt which need to match its value with the value of Drill.txt file then overwrite value from Drill.txt to header.txt. Now i want to make my Drill.txt in encrypted format to prevent anyone to open that file and modify out of program. They only can modify it through the program
I'm trying to enter code into a button to save a text file from a text box.The text box is called txtEditor, I have created an open file button using the openFileDialog1 and have been successful with this I just can't get the saveFileDialog1 to work.
I have to save the text boxe values of a form to a text file almost like a data record. I will be saving an Employee First Name, Last Name, Dept Number, and Phone Number. This I know how to do using streamwriter.
next form which we have to use stream reader to load one record at a time. The form has a next button to load the next record. How do I seperate each record (I am sorry for calling it a record if this is inappropriate) when use streamreader and how do I load a record at a time.
I know how to open a file and use streamreader, I just don't know how to read one record at a time and move to the next one.
I need to to able to save multiple text-boxes and a combo-box to a text file. the thing is, when I go to save, I check out the .txt file manually and its saved all in one line, no spaces. when I go to "read" it with the 2nd part (<-----this is a 2 part Challenge) it even reads all from that one line in the text file. What i'm asking is how can I make my text-boxes saved in the text file on different lines. [Code]
I need help in how to save text to a file in the text editing application I created. Well, I tried using the code below but it didn't do the work:[code]
I first want my program to get the text from a text file(I know how that's done), but once it gets it, I want to somehow save it that it won't need to get the text again(for example, if you restart the application, it won't need to get the text from the file because the text is already saved).
Is there a way to save all info for a button on onw line of text.example:
txtbtnInfo = Button1.ToString
I will then save txtbtnInfo to a settings file. Then when the form loads reset the button with
Button1 = txtbtnInfo
I have an app were the user can edit the size, color, and text of a button and I am hoping for an easy way to save this infomation. I am now saving the properties separately.
I'm reading a text file with StreamReader, line by line. If a condition is met, then I do an operation and then start reading the file again from the first line. I realize I could close and then re-open the file, but surely this would be very slow.
I could do this easily in VB6, but pulling my hair out trying to do this in vB.net. It seems that 'Seek' is the function to use, but it doesn't work.
I've seen other examples, where it works, but you must open it a different way -- with a file number.
Imports System.IO Dim I as Integer Dim LineText as String
I first want my program to get the text from a text file(I know how that's done), but once it gets it, I want to somehow save it that it won't need to get the text again(for example, if you restart the application, it won't need to get the text from the file because the text is already saved).
I have an SQL database, and 50 text files, and Visual Basic 2010 Premimum,I need to find a specific line of text in the text files and then take the next 37 lines of text and save them in my database. I need advice as to point me in the right direction
What kind of code would I need to open a text file and add a line of text at the end of a file. IE "C:UsersAdministratorDesktopfile.txt"...??? Then save it of course.
I have to create a new program that reads to Text files. These text files are in the form of a report (with column headings). The purpose is to compare each record line by line to see if their have been any changes made. The record is based on an Account#. Over time these files will be considerably large. What is the best way to do compare records from each file. I'm thinking loading each file into an array and processing them that way.
I must use streamreader to read text file line by line into array.
Here's what I've got.
Private Sub Button2_Click(sender As Object, e As EventArgs) Handles Button2.Click Dim numbers() As Double = New StreamReader(txtfile.Text) Dim numbersarray() As Double
I just joined this forum as I've been looking for a nice and serious VB forum for a long time
I'm having troubles making a program to search a text file line by line for a specific string.
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim objReader As New System.IO.StreamReader("C: est.txt")
[Code]...
as you can see in the code its supposed to read a text file and if the line contains the same string as in the textbox then its gonna make a messagebox.
now the problem, if the line does not contain the specific string but the next or any line other line does, then it should automatically read the next line on "Else" and that's where I'm lost
for a "Readnextline" command or something like that?
I have a list of random numbers in my text file.I read it like this.
Dim FILE_NAME As String = "C: est.txt" Dim TextLine As String If System.IO.File.Exists(FILE_NAME) = True Then
[code]....
How can I separate that in to 2 listbox?In my ListBox1 I want add lines with starting number like this ( 0905, 0906, 0915, 0916, 0917, 0926, 0927 ) And in my ListBox2 is with numbers start with this ( 0909, 0910, 0912, 0918, 0919, 0920, 0921, 0928, 0929 )How can I compare lines by multiple choices like that?
Dim sFileName As String Dim srFileReader As System.IO.StreamReader Dim sInputLine As String sFileName = "D:UsersArbenDesktopSerieA.txt" srFileReader = System.IO.File.OpenText(sFileName)
[Code]...
under the code I pasted at the top, but I get the text on line1 in all labels, like all labels become 1, while the text should be 1, 2, 3 and so on. So anyone can help me do that, each label gets the value of the next line in the txt file
the following code was to be entered to read each line of the file "line by line" It did not work for me as instructed and I am trying to understand why?
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click Dim FILE_NAME As String = "C:UsersOwnerDocuments est.txt" Dim objReader As New System.IO.StreamReader(FILE_NAME) Dim TextLine As String
i need my program to enter text into a txt file but, i can not seem to find out how to make it press enter, and i what i mean is my program adds to the text like this...[code]
