Save File With Extension And Icon?
Sep 26, 2009i have creaed an aplication with my extension can any one send source code how to save file with my icon at {REMOVED}
View 1 Repliesi have creaed an aplication with my extension can any one send source code how to save file with my icon at {REMOVED}
View 1 Repliesnow am doing circuit simulator using vb.net, now i need save this file with new extension .zen so i need code for this file save ,open and print in vb.net then i need to konw what are the properties to set in windows form to save ,open and print the file
View 2 RepliesIs there any sample code that could saving a file as .swf extension?
View 12 RepliesI am working on a project where i have yo save the records of application in a file having my extension( like .myex) and i want that when anyone double click this file,it gets open in read only format ,it should not be opened in .txt,.pdf or in any format ,this extension must be saved in registry also (regedit)
View 1 Repliesi just made a small notepad type program. The function for opening and saving are working perfectly but i want it so that i could save the ".txt" as my own filetype lets say ".tox" or something.
View 1 RepliesI want to save the fav icon in the each page i have navigated to. because i have a bookmark field where each bookmark is a .url file. and i want the icon to be the fav icon of the page it has saved. ( if i got one saying "Dreamincode" with "www.dreamincode.com" inside it then i want to save the icon of www.dreamincode.com )the name sould be the url. So i can use "if file.exist" becuase otherwise it will add a new icon for each image of items the site contains.
View 14 RepliesWhat the icon file filter is for load/save file dialogs. (I know the jpeg one is "JPEG Files (*.jpg)|*.jpg|PNG Files (*.png)|*.png|BMP Files (*.bmp)|*.bmp|All files (*.*)|*.*" But as far as I know you can't use these as icons without an icon editor).
View 1 RepliesCurrently I have made an extension .otxt it reads text files but i want to make an icon for it like in MS Office the .docx has a word document icon in it, I want the same to happen in my extension
View 2 RepliesHow do I change the icon of an extension using VB.net code?
View 2 RepliesHow To Change Icon Of An Extension? example : My Custom Extension Is .tmc
View 4 RepliesUsing Visual studio 2008, I have an application that its data can save to a binary file, using *.SDB extension, Moreover users can open this file from my application. I have 2 questions about this.
1-How can I assign an icon to this saved file with SDB extension when my application has been installed in other computer?
2-Similar to *.sln file (for Visual Studio project), How can I assign tow icon to single extension?
I want to save my work into .java extension only,
[code]...
I'm attempting to remake the Explorer to customize it some more. I know how to get Name, FileSize ect. Getting the Icon is hard though.
[Code]
The code i'm using to Insert the Icon into a image, i'm getting this error: Error1Value of type 'System. Drawing.Icon' cannot be converted to 'System.Drawing.Image'
I am using this code to to generate a crystal report from aa sql string that i construct using a supplied table name and some column names in txtSQL.This code contains functionality to export to ms word.However when the save dialog comes up and the user enters the intended filename.and saves the document.when the user attempts to open the document they have to use"open with" because the save dialog does not add an extension to the file so my question is how can i add an extension for tthe user programmatically.This is my first time using save dialog
Dim rpt As New MembersReport()
sfdSaveMe.ShowDialog()
Dim strExportFile As String = sfdSaveMe.FileName
[Code]......
I search but I didn't find the answer all of them explain how I use binary files only
View 2 RepliesI have a VB.NET program with a SaveFileDialog control with the filter set as ".asx|*.asx|.m3u|*.m3u" (without the quotes). It works fine to save a file, but if I then try to save a file with the same name of an existing file and then change the extension in the save as type box, it still thinks I want to save the file as the existing file and asks to overwrite the file, disregarding the newly selected file extension.
I have tried setting the SaveFileDialog.FileName = Nothing after saving a file, so the Save File Dialog Box the File name box is empty, but then I like to click the existing file to get the file name I want, then select a new extension and try to save, but it still asks to overwrite the file with the other extension.
I hope my situation is clear and sorry if it has been already asked a million times...but can anyone point me in the right direction or tell me how I can save the file with the currently selected extension, not the previous selected extension when the file name was entered?
Code:
If SaveFileDialog.ShowDialog = Windows.Forms.DialogResult.OK Then
If Path.GetExtension(SaveFileDialog.FileName) = ".asx" Then
' Code Here to Prepare the CodeASX ...
[code]....
I am writing an application that will cache all my files and then let me display files that I would like to display. I am wanting to extract the icons from each file as I cache them.My question is this: How can I detect if the icon from one file is the same as another icon and therefore prevent me from extracting it twice?
View 8 RepliesI need to save Bitmap object loaded from image file (.png, .jpeg, .bmp) and save it as an icon (.ico) to a separate file.
First I tried saving Bitmap object to a file with Icon ImageFormat:
using System.Drawing;
Bitmap bmp = (Bitmap)pictureBox1.Image;
bmp.Save(@"C:icon.ico", Imaging.ImageFormat.Icon);
This one fails, as the icon produced is not in a proper format and it cannot be used as an icon.
Next one was to get HIcon from Bitmap and save it to a file:
using System.Drawing;
using System.IO;
StreamWriter iconWriter = new StreamWriter(@"C:icon.ico");
[Code]....
This one does not do the job too. Although icon file is properly written, it has only 16 colors and a limited width and height.
I'd like to be able to write icons with custom width and height that would preserve colors from the original image. Is this possible to achive in .NET?
I am trying to develope a icon extractor program..
I've coded all the function exept the save as .ico ...
My Code works 50% The saved file color get mixed up, just like if you take a picture on a Camra with a negative function.[code]...
Im having some problems when trying to save an icon from resources.Im using the following: My.Resources.setup3.Save(Application.StartupPath + "\temp.ico") But that generates the following error: QuoteValue of type 'String' cannot be converted to 'System.IO.Stream'.
View 6 RepliesI've written a program that adds an image to an imagelist, with a transparency color set, and then saves it as an icon.it works + the image is saved with the proper transparency, but windows doesn't recognise my icons as icons. i've tried 2 ways[code]...
View 6 RepliesI am using VB 08 running an openfiledialogue wanting to get the result of the GDS file (*.gds) to be the default extension at the drop down menu instead of All file when the openfiledialogue box opens.
I coded it with:
OpenFileDialogue.Filter = "GDS File(*.gds)|*.gds|All files|*.*"
but the results i get in the open file dialogue box remains as all files being in the drop down menu as the default file extension. How to i set it to ".gds" format?
i trying to do a file upload, i want to image to save to image folder, however, the image don't know appear in the directory that i indicate if i click on "show all file", the image appear, but the image icon is blank or white like the image below show so i click on that image and click on "include it in the project", however, it shouldnt be the case that i everytime upload an image,i need to redo that again so how should i allow don't appear the white icon and to always appear in the upload folder when i upload a image instead of manually click on the image to include in ? is it visual studio problem? does i need to click on something to make the white icon disappear? [code]
View 2 RepliesI need a code that will save a picturebox image as a icon with a transparent background us this possible?
View 5 RepliesI have File Like "Sample.bak" and when I compress it to be "Sample.zip" I lose the file extension inside the zip file I meann when I open the compressed file I find "Sample" without any extension.
I use this code :
Dim name As String = Path.GetFileName(filePath).Replace(".Bak", "")
Dim source() As Byte = System.IO.File.ReadAllBytes(filePath)
Dim compressed() As Byte = ConvertToByteArray(source)
System.IO.File.WriteAllBytes(destination & name & ".Bak" & ".zip", compressed)
Or using this code :
Public Sub cmdCompressFile(ByVal FileName As String)
'Stream object that reads file contents
Dim streamObj As Stream = New StreamReader(FileName).BaseStream
[CODE]...
I need to compress the file without loosing file extension inside compressed file.
i trying to do a file upload, i want to image to save to image folder, however, the image don't know appear in the directory that i indicate if i click on "show all file", the image appear, but the image icon is blank or white like the image below show so i click on that image and click on "include it in the project" , however, it shouldnt be the case that i everytime upload an image, i need to redo that again so how should i allow don't appear the white icon and to always appear in the upload folder when i upload a image instead of manually click on the image to include in ?is it visual studio problem? does i need to click on something to make the white icon disappear?
this is my code
Protected Sub uploadImage()
Dim filename As String = FileUploadImg.FileName
Dim fileType As String = filename.Substring(filename.Length - 4).ToLower()
[code].....
where do can I find the save disk icon on the toolstrip.
View 2 RepliesI am trying to find a way to allow my users to choose the directory to save files into, THe file name is automatically generated as it has a naming convention and i am able to pre program a location to save to but i d like to be able to allow my users to decide themselves which directory they want to save the files to and to have the ability to choose which directory to save to
[Code]...
I created the upload page using with FileUpload server control. And I used regular expression validator to validate file extension.
<asp:FileUpload ID="AttachmentUpload" CssClass="text" size="58" Width="376px" IE:Width="385px" runat="server"/>
<asp:RequiredFieldValidator SetFocusOnError="true"
ID="AttachmentUploadRequire"
runat="server"
[code]....
It is Ok for chrome and IE but not Ok for firefox.
I need to be able to find files in a folder where the extension can be either caps or small letters. Here's my code:
Code:
Public Function GetIcon(ByVal name As String) As Icon
Dim execAssembly As Reflection.Assembly = Reflection.Assembly.GetExecutingAssembly
Dim stream As System.IO.Stream =
[Code]....
How can I modify that function to return the file regardless of whether the extension is in caps or small letters?
This is in VS2005 for a .NET 2.0 Compact Framework project