Send Email - Windows 7 (64 Bit) - Getting An ActiveX Exception On The CreateObject?
Mar 26, 2012
I am sending email via Office as per the example below.I am seeing an ActiveX exception on the CreateObject if office is already running (see below). If I close office prior to the CreateObject call, all works as planned.
http:[url].......
' Start Outlook.
' If it is already running, you'll use the same instance...
Dim olApp As Outlook.Application
Set olApp = CreateObject("Outlook.Application")
View 2 Replies
ADVERTISEMENT
Jun 30, 2011
I am troubleshooting a program that normally works, and has worked in the past on the machine I am working with.I am a very novice programmer, I didn't program this myself I am just trying to get it to work.I have done as much research as I can, which has lead me to believe it is permissions problem with the CreateObject command.I have tried a fix in the .net 2.0 machine.config file, changing the processModel user to System, that didn't help.The machine does have norton on it, and norton was installed since the program stopped working. However I have tried disabling norton and running the program. A friend suggested it might be some settings on the computer that Norton changed hence disabling it not helping.Here is the error:See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.[code]... When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies
Jun 8, 2009
If an exception occurs in your software how do you guys handle it?
These are my specific queries:
-Do you prompt the user of some options like retry and ignore?
-Do you show the exception message or show your custom message and log the exception message?
-Do you automatically send an email to prompt you of the exception?
The software will be in a remote place which I cannot personally go so I wish to know what will be the standard practice of such scenario.
View 3 Replies
Sep 21, 2009
I have a program that is able to print selected drawings to a printer near the person who requested the drawing. recently we updated from autocad 2008 and inventor 2008 to autocad 2010 en inventor 2010. With opening of inventor 2010 I don't have any problems. I'm usung visual studio 2005 I open autocad with the following text:
[Code]...
View 8 Replies
Nov 10, 2010
I am trying to send email from a Windows service but understand that I cannot use MAPI to achieve this. It is a simple service that monitirs a folder and I wish to notify a user by email that a file has been added to the folder.
View 3 Replies
Feb 6, 2012
I need to create a small report to be send automaticliy from VB.NET Windows application. I have wrote below code which is working on my private PC, and with Gmail settings, such as username + password + smtp.gmail.com, etc...
But with, my work informations, like my proxy ID + proxy password + company smptserver + port 25, does not working .
Do I missing some lines in my code?
CODE:
Here is also printscreen of error, while try to execute program.printscreen
Attached image(s)
View 1 Replies
Feb 6, 2012
I need to create a small report to be send automaticliy from VB.NET Windows application. I have wrote below code which is working on my private PC, and with Gmail settings, such as username + password + smtp.gmail.com, etc...But with, my work informations, like my proxy ID + proxy password + company smptserver + port 25, does not working .
Imports System.Net.Mail
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim Mail As New MailMessage
[code]....
here is also error while try to execute code from program.
View 1 Replies
Jan 6, 2010
I am sending an email with an attachment using the following Code
Dim msg As New System.Net.Mail.MailMessage(req.EmailFrom, req.EmailTo)
Dim att As New System.Net.Mail.Attachment("C:Documents and SettingsmichaelrDesktop1216259.pdf")
With msg
.Attachments.Add(att)
[code]....
The file size of the attachment is 396KB, upon the recipient receiving the email outlook shows the file size as 543Kb. Strange thing is if I send an email with the same attachment using outlook the file size is 396Kb.I understand that file sizes can increase due to the attachment being base 64 encoded as opposed to just raw binary.What I am failing to see is why outlook send a file which is 396KB in size but in code when sending it, the same file is 543Kb.
View 2 Replies
Jul 6, 2008
how would i implement a way that i would not hard code the email message that the application send to email recipients? how will i also include email message formatting (text in bold, italic, etc.)?
View 2 Replies
Feb 17, 2009
I'm trying to get my program to send very simple text email messages. I did do a search beforehand, and found that I was having the same issue as someone else, but the specific question I have was not answered --
I've learned that if you're trying to send mail, you need an SMTP server... I found this list here but every one of them I've tried yields the same "Failure sending mail" error.
Here's my
Dim mail As New MailMessage()
mail.From = New MailAddress("me@mycompany.com")
mail.To.Add("destination-email@whatever.com")
[CODE]...
Is the problem that I need to show "credentials" (i.e. user/pass)? If so, what would those credentials be? Can I use my yahoo email SMTP server with my login info to do it? And is this all I'd need to add to add the credentials?
smtp.Credentials = New NetworkCredential("MyUsername", "MyPassword")
(before the smtp.Send, of course)
View 4 Replies
Dec 15, 2011
I wouuld like to open outlook with new email with provided subject line, body message and attachment but no email address. User will enter the email address and click send . How can I do this?
I used following code but it gives me error for to address
Dim SmtpServer
As
New SmtpClient()
[Code]....
View 5 Replies
Dec 1, 2009
i can send email through vb.net behind code but how do i implement so that the recipient cannot see the sender email and only the name?i had done alot of research but i can't find any solution about this problem
[Code]...
View 2 Replies
May 28, 2009
Are there any good books out there that will show someone how to set up a form using Visual basic that will take information and send it to the server and then send a recipient an Email?
View 2 Replies
Sep 6, 2010
I'm my program always fails at the same line:
objUser = GetObject("LDAP://CN=" & strUser & "," & ADPath)
If I reduce the code down to just this:
objUser = GetObject(), I still get this exception:
"Cannot create ActiveX component."
After googling this for about 18 hours, I found that it could be because of a permissions issue. I am a local administrator on the PC, so I believe that takes care of permissions. Secondly, I discovered that the dll file might not be registered. I tried to use the following command to register the dll file I think is being used:
regsvr32 "c:windowssystem32wldap32.dll"
It says the following:
Error - The module "C:windowssystem32wldap32.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that "c:windowssystem32wldap32.dll" is a valid DLL or OCX file and then try again.So no matter what I try to do, I keep getting this unhandled exception error that says that it cannot create the activex component. What do I need to do to be able to use this getObject() command? Is the problem with LDAP? What activeX or DLL file is failing if even just running the getObject command gives an exception?
View 8 Replies
Mar 28, 2009
make an app for me that just sends an email of text from a textbox. if u have a source to one or anything like that because i have tried over and over and it just doesnt work
View 4 Replies
Aug 14, 2009
I want to send an email using the default email client. If this is not possible, then Outlook will be the client of choice.* I want to be able to send attachments.* I would like to use Read Receipt on outgoing emails if possible.
View 1 Replies
Jun 17, 2011
I have programmed a software that send emails it has CheckedListBox1 used to add emailsand CheckedListBox2 used to add atachments to be send to selected emails from CheckedListBox1so how to send email to checked email(s) from checklistbox1 with checked attachment(s) from checklistbox2?
View 1 Replies
Dec 22, 2009
i'm using the following code to send an email:
[Code]...
The problem is if I send more than one email to myself my email address keeps repeating itself in the "To" box. If I send an email to myself 3 times, the 3rd e-mails "To" box will say:
[Code]...
View 4 Replies
Mar 13, 2010
I need to use system.windows.sendkeys.send or whatever to send the Windows and D key. How would i do so?
View 10 Replies
Mar 25, 2010
I have the need to embed what I want to call an ActiveX component into a webpage on my intranet. The reason I want to do this is, I'd like to check if a USB security token is inserted on the end users PC.
My question is: what do I need to be researching to accomplish creating a control which can be embedded into Internet Explorer when programming in VB.NET?
View 1 Replies
Apr 5, 2005
I am trying to build a windows service application that uses an OCX component (non graphical). Creating the service is easy. In order for the OCX component to be used it must be loaded on a hidden form using the STA threading model. Creating a thread with STA is easy. In the thread function I created my hidden form holding the OCX and called the ShowDialog() method to have it load. The problem is that the form_load event is not called. The form constructor is called though.
I know that a windows service cannot have a gui but is it possible to have a hidden form? Maybe the problem is the ShowDialog() call? However if I don't do that then the thread terminates immediately. Maybe there is no message pumping loop? Since there is no "application" object I can't use application.run on the form. Basically, I am trying to have another thread manage it's own forms using its own message loop. Is this feasible?
View 1 Replies
Apr 19, 2009
I'm trying to register an active x control in windows vista but no luck. i'm using regsvr32 "myButton.ocx" in run command but its not working and giving error everytime. how can i register an activex control in windows vista 32bit?
View 6 Replies
May 26, 2011
I'm going to build a video player in vb.net, but during the development I've met some complications.
1) The windows media player ocx takes a long time to play the first video, I think for a problem of initialization
2) The window media player ocx doesn't play flv files
The alternative or possible solutions.
1) insert flv codec into the project for window media player ocx, but how?
2) use the flv component, but I don't know with precision what is the right code to use to play video files with the vlc component and sometimes during the dispose of the vlc instance, the system give me a blue screen.....
I know that there are two wrappers for the vlc componet the libvlcnet and the VideoLan DotNet for WinForm and WPF, but i don't find any example on how ti implement and use them in vb.net. Use the ffmpeg video conversion engine for window media player, but how can I implement ffmpeg in vb.net, is there any wrapper or activex for ffmpeg open source?
View 4 Replies
Mar 26, 2012
how to use visual basic to make web activex control for windows CE ?
View 1 Replies
May 28, 2010
I was trying to follow a code example I came across the net for programmatically sending email:
[Code]...
View 4 Replies
Apr 8, 2009
I am trying to load an actixex component in a VB project which was made in Visual C++.n VBA it works fine.In VB6, when I try to load the component on the toolbox I get an "Error 35005"In VB2008 the component can be added to the toolbox, but when I try to place it on the form, the following error occurs: "Failed to import ActiveX control. Please ensure it is properly registered."
View 1 Replies
Oct 20, 2010
How to Resolve following Error in .netNon-modal forms cannot be displayed in this host application from an ActiveX DLL, ActiveX Control, or Property Page.
View 1 Replies
Jun 10, 2008
I have a VB.NET application that uses the AXWindowMediaPlayer ActiveX to embed mpg videos to my application. I have used the Play/pause/stop Ctlcontrols a lot but now i am stuck as i needed to change the video size of the playing video from 100 to 200% hence my Questions:- How can i by code change the video size of the video being played? by Video size i do not mean the control's size.. but the Video being played inside it. for example, i could want the videos to play at 200% and not at 100%.- Is there a way to check the dimensions of the video being played so that i can by code change the video size if required as per the video.
View 6 Replies
Apr 11, 2010
I need to send a basic email from my site when someone registers for my site. Is their an easy way? or a site to reference?
View 3 Replies
Oct 21, 2011
How can I send an Email?
View 3 Replies
