I have an application that plays wav and mp3 files using the Microsoft.DirectX.AudioVideoPlayback.Audio()function. It works fine, and I can easily set the volume level of the playback... within limits.
That limit is the system volume level. I can set the playback level for the mp3, but if the system volume is muted or set real low it may still play softly.
So how do I set the master volume level, including making sure it isn't muted?
I have searched the web for code relating to changing the system volume, muting the system volume, and outputing the current level of the volume as an integer, using VB.NET.
All the code that I have found either doesn't work, or is very long.
How can I get the master volume level in Visual Basic? Must work on Vista and 7
View 4 Replieshow do i control the volume level that the speakers output?
View 4 RepliesI want to Ignore System Protected Folders Using My code.i already try Catch ex As UnauthorizedAccessExceptionor
View 1 RepliesDoes anyone know how to get and set the system sound volume? I have tried every method I've found on the net and none of them work. I've tried the winmm.dll APIs with no luck. I've also tried waveOutGetVolume/waveOutSetVolume, which didn't work. I'm using Win 7, but need a solution that works on XP+.
Right now I use the VolumeUp keyboard event, but I need to be able to get the volume and set it to a specific level.
caN SOMONE guide me how to make my own system sound control in vb.net like a slider or % or anything!!! just a volume control!
Understandable Answers
1 2 3 4 5
- - - - - Rate yourself And Have A Kitkat
[code].....
How can I control the Computers volume inside visual basic? (like you have the speaker icon and when you click on it Volume scroll thing) at the bottom left of Windows, but I want it in my program. I am running Windows 7 (if that makes any difference
View 1 RepliesI'm trying to make a utility that will fade out the system volume (for when I fall asleep listening to my music). In XP and prior, controlling the system audio was very simple, however, in Vista and 7, I can't figure out how to do it. Because in Windows 7 each application has it's own volume control, lowering the volume doesn't affect the system overall - only the current app. Can anyone point me to a resource how to do this? Every forum posting that I've found on this topic is about XP, and doesn't work under newer versions of Windows.
View 2 RepliesI'm developing video intercom system. i have push button to talk. when user press the push button, i need to increase the system microphone volume and mute the system speaker. While releasing the push button, i need increase the system speaker volume and mute the system microphone volume.
View 3 RepliesI have 2 trackbars (scrolling things) and i have a song playing in a media also but what i want is it to get the left speaker volume in 1 trackbar and the right speaker volume current in another, so when the song is playin it will adjust automatically and display the current left & right speaker volume (example: when the media goes louder the trackbar will probably increase) ive seen it in many programs.
View 6 RepliesI am using following code to get directory info. it works well if I search topleveldirectory. But when i search alldirectories, it reaches system level information and throws error. Is there any way to avoid searching system level information folder?
Imports System.IO
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As
[Code].....
I will make the command line tool to mute system volume,[code]...
But i can not use the Me.Handles without a form
I have a device (a few actually) that connects via USB to a PC. From here it acts like a basic storage device using FAT32 as the file system. The other thing is that it won't accept drive names (C:, E:, G: etc) to it so instead you need to use its Volume GUID to connect. I have retrieved this painlessley through MountVol.exe but thats where the difficulties ended.I am not trying to access the file system through VB.NET/C#.net (either will be fine - fluent in both ;) ). In Windows Explorer I can easily visit '\?Volume{71E4C2C7-E511-4B2A-BF5C-569B2B25784E}apic' to access the device and its files. I can also use CMD and the Dir command to go through the files. Just .NET cant seem to cope. I understand the GUID changes on each PC and I am OK with this as I can use MountVol to get the GUID and run the console app with command arguments as it will always be a human initiating the command.
I have tried manually entering the path via Console.ReadKeys but this also fails to even see the directory above and any of the files inside one being 'dev' without an extention. I can use System.IO operations without extensions on "normal" drives (ie those
with letters) so I know it's not the extension causing problems. I did a Try/Catch with a StreamReader pointing to the file to see what was spurted out:
System.ArgumentException: Illegal characters in path.
at System.Security.Permissions.FileIOPermission.HasIllegalCharacters(String[]
str)
I have a device (a few actually) that connects via USB to a PC. From here it acts like a basic storage device using FAT32 as the file system. The other thing is that it won't accept drive names (C:, E:, G: etc) to it so instead you need to use its Volume GUID to connect. I have retrieved this painlessley through MountVol.exe but thats where the difficulties ended.
[Code]...
[Code]....
This code is for listing all folders including subfolders. but when i run this code i m getting error "Access to Path F:System Volume Information is Denied" How can i ignore this folder and continue scan.? is ther any solution for this error?
how to get current volume of system sound device in windows 7 ?I looked up in google but every solution returned values like -1, 4686346, ...
View 1 RepliesI am trying to write a countdown timer I finally succeeded with MSDN. I get to work whatever I wanted, but this drives me nuts: How can I read and set the volume control? I want, once my timer is run down to zero, read out the current system setting, then play a system sound using
Media.SystemSounds.Exclamation.Play()
Over time I like to ramp up the volume to 80% or until one clicks the Alarm off button (then stop the timer, no sound, and reset volume).
I have the following code.
Imports System
Imports System.IO
Public Class frmUpdater
When I try to run this I get the following error: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted.I am trying to read all drives with FAT16, FAT32 and NTFS.My PC is using NTFS and is running normally.
I am working on a little project for my phone creating some sort of remote to turn up/down my system volume via wifi. The phone will send data to a text field on the website lets say such as "vol up" and the vb app sitting on the computer will be constantly reading this text field for key words like "vol up", "vol down". when it see's a recognized command it reacts by turning the volume up and so on. And one more thing: Is it possible to have a vb app that uses http? E.g., sits on port 80 itself and can be accessed via local ip.
View 8 RepliesI don't know how to run my application with system level privilleges, so that it does not encounter any UNAUTHORISED ACCESS in any case and when in seen in TASK MANAGER the user shown will be SYSTEM.
View 6 RepliesI don't know how to run my application with system level privilleges, so that it does not encounter any UNAUTHORISED ACCESS in any case and when in seen in TASK MANAGER the user shown will be SYSTEM.
View 19 Repliesi don't want to use the system date and time in my mini project.i want to create my own system date and time to be in sync with standard time i specify?
View 3 RepliesHow do one create System Level environmental variables manually. I just installed a GeoSupport Desktop Edition software and in the document it is mentioned that I need to create system-level environmental
variables for PATH and GEOFILES manually
Add the location of the GDE executables to the system-level environmental variable PATH.Normally this means adding C:Program FilesGeosupport Desktop Editionin to the PATH.
I try to create a form that managing the access level of user management system.The model I use is the following :I create a connection to database I create a DataAdapter to transfer the data from the database I create a Dataset to hold my data My form consists of the following :A ListBox that list all the access level namesThree text boxes: the first for the record ID The second for the access level name And the third for the discription of the access level Five check boxes:One for writing rights One for the deleting rights One for the Updating rights One for Printing rights And one for Special area access rightsSo what i do is the following :I create a connection string I create a new connection to my database server I create the DataAdapter I initializing the DataAdapter command such as SelectCommand, DeleteCommand, e.t.c.I fill my DataSet with the data DataAdapter get from DataBase I binding my controls to DataSet I setting the DataSource property of the ListBox to my DataSet I setting the DisplayMember to the ACCL_NAME column of the DataTable inside the DataSet I setting the ValueMember to ACCL_ID column of the DataTable inside the DataSetUntil this time all are fine ! ! !The question is :When i try to add a new row to dataset by using the following code i have a problem :
Dim newRow As DataRow = Dataset.Tables("TableName").NewRow newRow("COLUMN_NAME") = Binded Control Value DataSet.Tables("TableName").Rows.Add(newRow)
i want to know how to hide files and folders at system/kernal level. Those files must not be accessible through any means untill they are unlocked again with same method. I want to create an application similar to Folder Lock apps commercially available
View 11 RepliesI'm attempting to use waveOutSetVolume from coredll.dll to gradually increase the audio volume from silent (or near silent) to maximum.
Most of the code examples I'm finding show some predefined set points for Off, Low, Normal, Medium, High, and Very High like this:
Public Enum Volumes As Integer
OFF = 0
LOW = 858993459
[Code]....
OK, and here's some API documentation which doesn't make a lot of sense to me in this particular context. What is low-order word and high-order word and how can they both exist in a single value?
· dwVolume New volume setting. The low-order word contains the left-channel volume setting, and the high-order word contains the right-channel setting. A value of 0xFFFF represents full volume, and a value of 0x0000 is silence. If a device does not support both left and right volume control, the low-order word of dwVolume specifies the volume level, and the high-order word is ignored.
I am creating an Excel add-in written in VB.NET. I would like to bind KeyDown and KeyUp events to the spreadsheet to record when the user presses and releases the arrow keys while navigating the spreadsheetIdeally, these events would be built into Excel alongside the native SheetActivate and SheetSelectionChange events, for example. Alas, they are not.
View 1 RepliesIn Visual Basic 2008, there's two different ways that I know of to accomplish the same thing:The Dim on the member level:
Dim counter1 as integer = 0
Dim counter2 as integer = 180
Public Sub SampleSub1()
[code].....
I have created a simple program which uses a two tier structure of SQL Tables.At the top level, one record holds the date of the activities and linked to it using its primary key as a foreign key, three subordinate tables hold time stamped records.The issue I have been unable to solve is that before adding any of the lower level records for a given date, a newly added top level record must be saved to the database.Doing this manually is simple - but can I rely on my users to remember to do this before they start plugging in the lower level data?I thought not, so I am looking to save the top level automatically.I've failed miserably but I refuse to believe that it's not possible.
View 14 Replies