I am converting a 1.1 .NET web app to 3.5, and I've run into a bit of a jam.
One web control has a Property that sets the page title label on that web control.
End Property
When a page with the web control was loaded before, it would set the Property to a given string, like in ucHeader.PageTitle = "This is a string." Now, if I don't remove the lblPageTitle.Text = Value, I get a NullReference Exception.
I am using a user control using vb.net. It include the program to retrieve the values from database while giving the paramers. When I set the property from my main program i am getting an error "Invalid attempt to call Read when reader is closed." When i gone to the online help i got the message as follows "System.InvalidOperationException (.NET Framework 4)The exception that is thrown when a method call is invalid for the object's current state. InvalidOperationException is used in cases when the failure to invoke a method is caused by reasons other than invalid arguments. For example, InvalidOperationException is thrown by IEnumerator.MoveNext if objects of a collection are modified after the enumerator is created, or ResourceSet.GetString if the resource set is closed before the method call is made. If the method invocation failure is due to invalid arguments, then ArgumentException or one of its derived classes, ArgumentNullException or ArgumentOutOfRangeException, should be thrown instead.[code]
View 1 RepliesI am creating a customised version of the ListView control and there are several of the properties that a ListView has that I would like to be set to a different value to the ListView default when a user goes to use my user control.
From what I've found there seems to be a number of people suggesting just set them in the constructor, but to the best of my knowledge that would just mean that the user would not be able to change the properties in the PropertyGrid in the VS IDE.I assume this is probably something extremely simple that I have overlooked.
I am using VB 2008...
On my form I have a "Combobox1" that pulls a list from an access table. I also have a "DataGridView1" that pulls data from another access table.
I am trying to set the "DataSource" property of the "DataGridView1" after clicking a button, which pulls the "Text" property from the "ComboBox1".
ComboBox1.Text will always equal DataGridView1.DataSource as a text string.
I researched the Get/Set command, but it does not make sense to my specific application. I have read countless articles online for weeks, but I have now taken the next step.
I have included a Date and Time Picker Control in oen of my MS Access Forms and want to set its value on the form open event. However, when I try to set the Value property I get the following error message :
[Code]...
I have an array of labels on my form which are all named "lblLabel1" thru "lblLabel9", but I want to be able to take a users numeric input (lets say 3), and display the 3 on lblLabel1, then I need it to increment by one all the way to lblLabel9. How can I do this? I was thinking a loop so this is what I came up with, but it didn't work:
For b As Integer = 0 To 8
lblLabel(b).Text = String.Concat(intSomething, "+", intAnother, "=")
Next
'Where b = the label number (I know it's zero based, I would change it later)
In on a section of my book about classes and properties. In this example, the author is attempting to show how you can validate a value passed to the property before setting the property. Looks like so far in this book, a couple of things have slipped past the editor, and I think this might be another one...Here's the example:
[Code]...
I have been using vb6 for a while, I am following a tutorial by MS to develop a basic application and a simple task cannot be completed for whatever reasons! The tutorial asks to drag the label object from the toolbox and drop in the tab control container. Then, go to the label size property and adjust the size to some different dimansion. Basic stuff, right? It won't let me do it! After I enter the new dimensions (which by the way are not large or very small), the label size (both width and height) resets back to its original dimensions! I have the vb.net sp1 installed.
View 2 RepliesIs there a way to do something like: (where csinglechar is the number being read from the text file)
Dim Number_File As String = "numbers.txt"
Dim read_numbers As New System.IO.StreamReader(Number_File)
Dim intsinglechar As Integer
[Code]....
When a number is read in the text file, the label: labelNUMBER_FROM_TEXT_FILE increments by one.
I want to say the timer count the time the Process is working so that it Counts always higher on a Label with the Text 00:00:00. So it always go higher by 5ms:
00:00:10
00:00:15
00:00:20
00:00:25
and so on.
I have the following property in a class:
[Code]....
The problem is that when I try to set the property like this: myClass.Language = "English" The property is set to "English" and not to "<![CDATA[English]]>" which is what I want. What is the reason for that and how can I fix it? When placing a break point on End Set and use the Watch window to inspect the value of _Language after setting the property to "English" it remains "English" and doesn't change.
I've added some Labels to a form at runtime using this
vb.net
Dim x As Integer = 25
For i As Integer = 1 To word.Length
[Code]....
Now, I would like to add text to one of them, but I'm not sure how. I thought by setting .Name I would simply be able to write something like lbl4.text ="A". But, of course, because the Label has not been created yet, this is not possible.
Also, I'm not even sure if .Name is working the way I think it is. I was hoping that it would name each Label consecutively: lbl1, lbl2, lbl3, lbl4...etc.
Am I naming the Labels properly? And how would I add text to one of these Labels?
I'm having problems with my labels for some reason when I set the font color to red it shows up grey when I run my project?
View 1 RepliesI have a picturebox image for the form and added a label on top of the image, i have it set the background on the label to transparent but its not transparent. How do i fix this ?
View 2 RepliesGiven a simple class like this:
Public Class clsOB
Implements System.ComponentModel.INotifyPropertyChanged
Private _Frequency As Double
Private _Value As Double
Public Event PropertyChanged(ByVal sender As Object, ByVal e As
[Code] .....
And then I'd like to do something like this:
Dim
o As
New
clsOB(50, 30)
o = 31
I'm new to classes. In my Who wants to be a Millionaire application, I have a Lifeline class and I create three instances of it - FF, PAF and ATA (50/50, Phone a Friend and Ask the Audience). Something I do with a lifeline is put a cross over its logo, hence the need for a centrepoint property, which marks the centre of the cross on a form.
Public Class Lifeline
Private ptCentrePoint As Point
Public Property CentrePoint() As Point
Get
CentrePoint = ptCentrePoint
[Code] .....
What happens is that at the "Call Form2.DrawCross(Form2.CentrePoint)" line, the tooltip shows that the FF object's centrepoint property isn't set (as I thought it would be by " FF.CentrePoint = tmpPoint").
I have this simple code,
Protected Sub grdSearch_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdSearch.SelectedIndexChanged
TimeOff.Where = "UserName=""" & grdSearch.SelectedValue & """"
End Sub
Doing so causes this error, 'UserName' could not be resolved in the current scope or context. Make sure that all referenced variables are in scope, that required schemas are loaded, and that namespaces are referenced correctly. Near simple identifier, line 6, column 1.
The datasource works fine before the where property is set.Update: I found the issue but I still don't get it.Adding it. in the where clause solves the issue. Like this,
TimeOff.Where = "it.UserName=""" & grdSearch.SelectedValue & """"
I am programatically creating instance of usercontrol as shown below
[code]...
I have two public properties in my usercontorl like clerkName and RespName. How can I set those values in the above code. Intellisense is not showing ClerkName and respName Properties.
i want to set autocomplete textbox, but if multiline property of textbox is true, i can't do it.
View 6 RepliesI'm reading in a configuration file which is simply a txt file that configures my Com port and sets some directories. It's basically for the end user to set the interface. I want to give the user the ability to change backcolor properties on my NumbericUpDown property. So when I read in the Config.txt file the end user can change coloring on the General Form. In this case the NumbericUpDown. How to assign a variable for color from my string (from my txt file) that I read in.
View 5 RepliesIm currently debugging my application to found out why it's running a bit slow, when I put breakpoint where i populate one of the application combobox it's run fast but after i populate it and when I'm trying to set the its selectedindex to zero the program halt for about 2 second.. this is the line where the program get stuck for 2 seconds:
[code]...
I have a single form that I would like to move across the screen with my VB program. Of course it's simple to set the location X and Y property for compile time using the properties tab, but I want the form to move as the program runschanging the coordinates within a for-next loop.I can easily get the X and Y coordinates of the form within my program by using X = me.location where X has been dimmed as type point.console.writeline(X) will appear as {X=20, Y=40}. for example
View 2 Replies.From = New MailAddress("Me@MySite.com", "Big Mike")This does not;
Dim AddressFrom As String = "Me@MySite.com"
Dim FromDisplayName As String = "Big Mike"
.From = New MailAddress(AddressFrom , FromDisplayName)
I receive the error; The specified string is not in the form required for an e-mail address.I would REALLY like to use variables here so that I can read these two pieces of data from My.Settings. I've been searching for the answer for hours and I'm stumped.
Can someone clarify if there is ever a need for the below?
When setting a textbox "Visible" property to False is there any reason why I should also set the "Enabled" property to false.
I have a lambda function that I can assign to a field and pass it to a sub routine, but cannot assign to a property. My field is defined as follows:
Public Delegate Sub SubDelegate()
Private pDeleteFunction As Func(Of BookCaseRow, SubDelegate)
[code].....
How do I set my horizontal scroll bar to have the values increment between 1 and 100 and then have a label (lblFuelChosen) updated according to the value chosen on the scrollbar?
I have a label that is named lblFuelChosen and I have a horizontal scrollbar underneath it. I need to set the scrollbar to increment in values between 1 and 100, and the value to be placed in the lblFuelChosen label. How do I set the scroll bar values and how do I set the value to the label?
I have an xml document on the internet right. Lets say it contains:
<tag>goose</tag>
What I want to do, is when the user clicks a button in my vb form it looks for the "tag" tag and finds the text inside the tags which is goose. Then it sets a label to equal goose, or whats in those tags.
I am looking how to set events to a webrowser which is being created by the following:
[Code]...
Trying to set a Combo Box RowSource to a field in a table that contains the choices separated by semi colons. Have tried both a query and a DLookup but it results in displaying the full contents of the table field, e.g. "10;12;14;16" rather than giving me the usual selection list
View 2 RepliesVS 2008, vb.net, Win7 development machine. I've developed a Windows application with several different forms, and am using the My.Settings feature. This is the first time that I have used this feature. For each form, I have set the form's property binding 'location' property to an entry in 'settings' of My Project settings page of the VS 2008 development environment. The settings are set to user scope.
1.) Do I need to add any code to my application to make the settings work, or is it sufficient that I have the "Save My.Settings on shutdown" set to true?
2.) When I create my setup to install the application, what settings file (app.config?) do I install to the user's machine, and what folder should it be installed to?