I knew VB.net is very weird when talking about shadows and overloads, but this this I'm completely baffled.I'm working with a model similar to the following one. Parent class:
Public Class Base
Function F() As String
Return "F() in Base Class"
End Function
[code]....
Yesterday I started my first DLL project which is for ArabicMessageBox that will allow arabic programmers to display there message in totally Arabic message.My project contain one Form only, and the basic code that I use is:
Public Overridable Function Show(ByVal APrompt As String) As MsgBoxResult
mLoad(APrompt, MsgBoxStyle.OkOnly, "")
Me.ShowDialog()
[code]....
I have a main form and a sub-form which is opened in modal way (by subForm.ShowDialog())The sub-form has a msgbox function inside. after this msgbox is displayed to screen, the application closes the sub-form for unknown reason (and goes back to main form).If I use "subform.show" instead of "subForm.showdialog" - everything works fine.
View 8 RepliesI have a task to provide a RichTextBox control that behaves like a tooltip, ie:
1. Hovering when mouse moves
2. Remove after N seconds (customizable) or if the user closes it (by "X" button)
The regular tooltip does not provide a RichText capabilities (else I'd take it)
Should I take a form and put a RichText inside, and set the form properties accordingly? Something else?
I have project that communicates with an embedded device via Telnet and displays the data string in a RichTextbox. Here is the (weird) problem: every time I send a command, the device responds, at the end of the response there is a prompt on a NEW LINE. However, when I ASCII encode the bytes received and display the string, the prompt is on the same line as the response in the text box. So I looked at the bytes for several different commands and the response always starts with a 13,10,13 which is CR, LF, CR, that puts the response on a new line, also displayed on a new line in the text box.
However, at the end of the response, there is always a 13,13,10 (CR,CR,LF) followed by the prompt, but in the text box the prompt is NOT on a new line it is merely a couple of spaces after the response. The funny thing is that this behavior is absolutely not present in Hyper Terminal, or Tera Term applications, when I connect to the device using Tera Term, the prompt is always on a new line. Even the VS IDE shows this correctly in the Output window, every prompt is on a new line. I can not for the life of me figure out why this behaves differently in my RichTextbox. I have experimented with different settings for the textbox, but so far nothing worked.
I am creating a custom Label control (by simply Inheriting the standard Label control and re-painting the background and text) because I need a very specific background and border. In the constructor of the control, I set the AutoSize property to false so I can have a standard default size for the new label.
Public Sub New()
/*Set the default size of the control to 75x24*/
Me.Height = 24
[code]....
In my application that uses this control, if I create the new custom label at run time (in code), the AutoSize property stays False, and it works properly.If I try to add the new custom label to my form at design time, it comes in with the AutoSize property set to True, and I have to manually set it to False in the properties window. It's not a huge problem, but I don't understand why the behavior is different.
What are the differences between the Shadows keyword in VB.NET and the New keyword in C#? (regarding method signatures of course).
View 2 RepliesSay I have, for examples sake, a class Test1,wich has a function, Test1.CreateNew, returning only a new object of Test1.
Public Class Test1
Public Overridable Function CreateNew() As Test1
Return New Test1
[code].....
I'm using the standard code for form drop shadows that creates an effect identical to that of XP's, but you will notice in Windows 7 that the shadows are much larger, are not visible only on the right & bottom sides of the form (example: [URL])
Here's the code I'm currently using:
Private Const CS_DROPSHADOW As Integer = &H20000
Protected Overrides ReadOnly Property CreateParams() As System.Windows.Forms.CreateParams
[CODE]...
Is there a way to expand the shadow to resemble Windows 7 more?
Currently I'm using the standard code for form drop shadows that creates an effect identical to that of XP's, but you will notice in Windows 7 that the shadows are much larger, are not visible only on the right & bottom sides of the form (example: [URL]Here's the code I'm currently using:
Private Const CS_DROPSHADOW As Integer = &H20000
Protected Overrides ReadOnly Property CreateParams() As System.Windows.Forms.CreateParams
Get
Dim cp As CreateParams = MyBase.CreateParams
[code]....
Is there a way to expand the shadow to resemble Windows 7 more?
I am trying to serialize and object which inherits from another object and uses shadows.
Public MustInherit Class clsGenericField
private moValue as object
public event ValueCha
[code].....
when we have a method of a derived class implementing a method of an interface which is already implemented in the base class, the compiler throws a warning (by default). when i see a warning i will try to erase it and the only way to erase this warning is to mess with the settings of the compiler hence i hope that there is a way to declare "how" a method implements an interface's method. by this i meant that we should be able to declare overridable, overrides and shadows for the implements keyword. hence if we declare overridable-implement for a method of a base class implementing an interface's method, the compiler should give no warnings when we override this implementation (re-implementing in a derived class). Similarly, if the method of the base class implementing an itnerface's method was not declared as ovveridable-implement, the derived class should be able to Shadow the implementation example code which flags unnecessary warning:
[Code]...
Warning1property 'Events' shadows an overloadable member declared in the base class 'MarshalByValueComponent'. If you want to overload the base method, this method must be declared 'Overloads'.
<Global.System.Diagnostics.DebuggerNonUserCodeAttribute(), _
Global.System.ComponentModel.Browsable(false), _
Global.System.ComponentModel.DesignerSerializationVisibility(Global.System.ComponentModel.De
[code].....
I've wanted to know the answer to this question for a long time but I never really took the time to ask anyone. My question is, why do rounded edges or drop shadows of transparent form layouts turn white. Take a look at the following image to know what I'm talking about.
View 3 RepliesI've inherited a lot of custom made software for an office, and, while managing it, I've found it performs differently from machine to machine.I mean, some controls get painted in weird ways in some machines but well in another, or just work differently, like in some machines clicking something selects it, and in the next machine clicking the same thing makes it editable.I suspect, o course, of the myriad of DLL the software loads
View 2 RepliesI placed this checkbox named owner on my form. When i build the project i got the error as
Quote: 'owner' conflicts with property 'owner' in the base class 'Form' and should be declared 'Shadows'
[Code]...
I am converting an application from vb.net 2003 to 2005. I got the following warning and need help how to resolve it. withEvents variable 'PreviousPage' conflicts with property 'PreviousPage' in the base class 'Page' and should be declared 'Shadows'
View 1 RepliesWhat does this error mean? I havent modified anything in the designer code, but its giving me an error? WithEvents variable 'Move' conflicts with event 'Move' in the base class 'Control' and should be declared 'Shadows'. The error relates to Friend WithEvents Move As System.Windows.Forms.DataGridViewCheckBoxColumn
View 1 RepliesPASTE ALL of this to your Form1 code window please and add one Button to Form1.
Now I am asking developers here who actually do software development for a living
especially those persons holding MCPD or similar Microsoft Certification please.
1) When redeclaring a method as in AnotherClass below which Inherits from ExampleClass,
is the recommnded way to use SHADOWS or OVERLOADS please? 2) What about when you do the same with a PROPERTY please?
Option Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
[Code]...
I want to make an numerical integration method with takes in an analytic function and integrate it over a specific interval. For the numerical integration procedure I want to use some procedures in nr.com. The problem is that these are programmed in C++ and they uses functors to pass a function to the integration method. How can I do this in VB 2010?
I want to initialize the function (i.e. set a=1,b=0 for function y(x)=a*x+b) and then pass the function to the integration method. Then when the integration method call the function it only calls the function with one parameter (i.e. x since a,b is already set)
What is the best way to do this in VB2010?I want to make a general integration method where I can pass any single valued function and integration limits.
I have just started using VB, and from what I have found so far it seems like the tools you have is
- to us a delegate for the function
- to use a lambda expression for the function
- send a pointer/adressOf
- to create a function class/structure and submit this to the function
As for now I am most inclined to create a function-class. But I am not really sure how.F.ex. I make different classes for each "uniqe function" I want to integrate, but how can I pass them to the integration function when I need to specify the argument type in the integration-function-call?This seems like a basic problem which applies to many Math operations, so I think it would be very useful to clarify this.
I'm trying to undersatnd the syntax of calling a funciton and it seem confusing when I'm using a web service in ASP.net. Maybe this question should be in an ASP forum, but it is a VB question. This simple web service allows you to type in your name and it response with an alert box with you name.
My question is, How can you call a function with 2 arguments when the function is only defined for one. I understand that the second argument is actually a method that handling the respons, but how can you interchange function arguments for methods and how do you know that there are methods for
Here's my call:
<script type="text/javascript">
function HelloWorld()
{
var yourName = $get('txtYourName').value;
[CODE]...
I am trying to convert a DLL function call which has the Callback function routine called within the DLL function call.The DLL function call signature is like this:
typedef void *HANDLE;
typedef HANDLE HACQDESC;
DECLARE_HANDLE (HWND);
[code]....
how to convert this DLL call to VB.NET and also how to create the callback function and send it as parameter to this function
call.
i wanted to ask how to make picturebox1 ,to which functions are already assigned, perform the same function as picturebox2 ,to which no functions are assigned.For example:I have already made picturebox1 and have assigned it alot of function like when play button is pressed then picturebox1.visible = true and when we press pause button picturebox1.visible = false. So now i decided to make a theme and have to remove the picturebox1 and want to allow the picturebox2 to havefunction of picturebox1.But when i disable the theme the function of picturebox1 should go back to picturebox1.
View 6 RepliesI need to execute a stored function in oracle or sql through vb.net. I created a command object. Depending on the database type(oracle or SQL) i am preparing the Command text as Select functionName(?,?,?,?,?,?,?,?) from dual; (For Oracle) Adding the parameter values of the function. Now performing the ExecuteScalar which is not working saying invalid parameter. This works with ODBC connection string. But ODBC doesn't with 64bit. My Requirement: Code should execute a user defined stored procedure by taking the values at runtime.
View 1 RepliesI'm currently working with a client's VB.Net code, which was developed for them by a small development shop a few years ago and which they purchased and have been maintaining and uprgrading since. This client's primary developer is out on indefinite (likely permanent) medical leave and I'm now filling in until they bring in a full timer (as I'm a contractor here). My current task is to add some functionality to a the VB.Net code they purchased. I'm finding practices and techniques in the code that absolutely baffle me and can't make the code do what I want. I'm starting to wonder if it's me and was hoping to get some thoughts on the code I've encountered.
For example: Setting a variable to accept the result of a function by calling the function with many parameters, clearing the parameters in the function, setting them to some value, calling another function with those new values, then never using the values returned by the functions. I'll add a code snippet in the first comment since this is already getting long.
Hi. what is the difference of sleep function and pause function (using timer) between a loop.
View 12 RepliesWhat does this error mean in VB6? Function or interface marked as restricted, or the function uses an Automation type not supported in Visual Basic.
I keep getting it when i call a particular method of a dll that comes with windows xp and beyond (in system32 called upnp.dll)
I am inheriting some .net code and they use a couple things i am unfamiliar with and was wondering if someone could shed a little light on why they are used.
Here they are:
Public
Shadows
Sub RemoveAt(ByVal
indextmp As
Integer)
When and why would you use "Shadows"?
Public
Overloads
ReadOnly
Property Count()
As
Integer
When and why would you use "Overloads"?
How can I call a function from inside another function and suspend the calling function until the called function is finished? I hope I can get some replies because I don't know how to ask the question and make sense:).
Anyway what I am trying to do in steps:
1. The user clicks button1 which triggers the click event.
2. From the click event I call a function
3. I then pop-up a form, that has instructions for the user to read.
4. After the user has read the form he will click the "Done" button and return to the calling function.
The problem is the the calling function continues to execute. I want to stop execution of the calling function until the users clicks the "Done" button on the instruction pop=up. I know I can use a msgbox but the instructions can be lengthly and does not look good in a msgbox.
I have tried the Call method with return in the "Done" button click but I can make that work. I also tried a goto statement but I can get that to work either. In the call statement I said call frmInstruction.show() and it got there but as I said the calling function continued to execute.
ive two custom controls, which are used to draw and edit etc...(like paint but customized....) i want to save their images with a single click....So im using the Getimageofcontrol function to do it....its code is below:::
Public Function GetImageOfControl(ByVal c As Control) As Image
Dim rc As New Rectangle(c.PointToScreen(c.Location), c.Size)
Dim i As Image = New Bitmap(rc.Width, rc.Height)[code].....
and the code to call this function for saving the images is simply.. ...
GetImageOfControl(pboxd).Save("c:78.jpg")
GetImageOfControl2(pboxf).Save("c:lp.jpg")
but the problem is that both the images have the same content....