.net - Label Control Behaves Differently At Design Time Versus Runtime?
Jul 8, 2009
I am creating a custom Label control (by simply Inheriting the standard Label control and re-painting the background and text) because I need a very specific background and border. In the constructor of the control, I set the AutoSize property to false so I can have a standard default size for the new label.
Public Sub New()
/*Set the default size of the control to 75x24*/
Me.Height = 24
[code]....
In my application that uses this control, if I create the new custom label at run time (in code), the AutoSize property stays False, and it works properly.If I try to add the new custom label to my form at design time, it comes in with the AutoSize property set to True, and I have to manually set it to False in the properties window. It's not a huge problem, but I don't understand why the behavior is different.
View 4 Replies
ADVERTISEMENT
Apr 8, 2011
I want to ask a question about adding controls in design time (controls may be any win form control or a user control) and adding the control in run time.
View 2 Replies
Jul 8, 2009
I have project that communicates with an embedded device via Telnet and displays the data string in a RichTextbox. Here is the (weird) problem: every time I send a command, the device responds, at the end of the response there is a prompt on a NEW LINE. However, when I ASCII encode the bytes received and display the string, the prompt is on the same line as the response in the text box. So I looked at the bytes for several different commands and the response always starts with a 13,10,13 which is CR, LF, CR, that puts the response on a new line, also displayed on a new line in the text box.
However, at the end of the response, there is always a 13,13,10 (CR,CR,LF) followed by the prompt, but in the text box the prompt is NOT on a new line it is merely a couple of spaces after the response. The funny thing is that this behavior is absolutely not present in Hyper Terminal, or Tera Term applications, when I connect to the device using Tera Term, the prompt is always on a new line. Even the VS IDE shows this correctly in the Output window, every prompt is on a new line. I can not for the life of me figure out why this behaves differently in my RichTextbox. I have experimented with different settings for the textbox, but so far nothing worked.
View 7 Replies
Dec 21, 2010
I've inherited a lot of custom made software for an office, and, while managing it, I've found it performs differently from machine to machine.I mean, some controls get painted in weird ways in some machines but well in another, or just work differently, like in some machines clicking something selects it, and in the next machine clicking the same thing makes it editable.I suspect, o course, of the myriad of DLL the software loads
View 2 Replies
Jul 26, 2010
In some of the forms ,whenever i change some properties using the Properties Window of some controls or the form they get reflected in the Properties Window but will not get changed at Run Time.
I am facing this in quite many of the forms, hence i am applying the property changes in form load, this is causing performance breach .
View 15 Replies
Apr 19, 2011
In a VB.NET winform App I want to place icons on each tab header of a TabControl.I set the ImageList property of the TabControl and for each Tab I set the ImageKey property.My icons show as expected on each tab at design time within the IDE but when I run the App, my icons don't show (an empty space is shown instead).
View 1 Replies
May 16, 2012
I have a small dataset which has most of its schema defined at design time, but I add a few columns to one of its tables at runtime. My problem is how do I reset those changes? he dataset is not linked to any datasource. It just has its own table which I "manually" populate. The static columns have been added to the datatable at design time. However, I add a few columns as runtime based on a list of categories. Like this:
[Code]....
The dataset is used in a small dialog that pops up within my application. I add the dynamic columns when the dialog is opened by using the Load event. Everything works great the first time. But if you close the dialog and reopen it, there are problems. My startup routine tries adding the dynamic columns again, but an error is thrown saying the column already exists. I have tried a lot of things and did some reading but I can't figure out a way to reset the dataset when the dialog is closed. The only solution is to close the whole application and reopen it. I have tried the following in the Leave event of the dialog form:
[Code]....
View 3 Replies
Jul 1, 2012
I use try catch finally to handle errors in my program. And these work fine when i debug application, but when i install it, error handling does not work?!
View 1 Replies
Aug 16, 2010
I've created an SQL Query using the query builder. In the query builder, you can test the query by clicking the button "Execute Query", and entering the desired values in the parameter fields.
My query returns the correct results when I do this, but when I seemingly pass the same values at runtime, I get 0 records returned.The query is designed such that you can pass nulls if you don't wish to filter data by that particular parameter.
SQL Query:
SELECT ID, UPC, Quantity, Manufacturer, Style, Color, Size, Category, DateReceived, Cost, OriginalRetail, Retail, LocationID
FROM Inventory
WHERE (UPC = @UPC OR
[code]....
In the query builder "Execute Query" dialog, I enter a value I know that the db contains in the "Size" field, "1/1/1900" & "1/1/2199" in Dates A & B, respectively, and nulls for all other fields. This returns 1 record, which is just as I expected. It works correctly.But when I pass the same values into the method created by the designer, I get 0 records returned. I can't figure out where the problem lies. Even if I enter nulls for all fields other than the dates, it returns 0. This tells me that the dates are causing the problem, but I can't figure out why, because I'm passing strings equivalent to what I entered in the query builder.
View 6 Replies
Aug 13, 2011
I'm using .net 2008 Trying to create a small graphic component, I have a problem setting background both at design time and then runtime. I derived a panel like this
[code]...
But it isn't working! If I don't Overrides Property BackColor, this is working as expected but I really need to group in my custom tab.
View 6 Replies
Jun 19, 2011
Is it possible to create a menu at design time and populate it at run time and then display it at the mouse pointer when I click on a cell in a datagrid?
View 11 Replies
Feb 9, 2011
i have a splitter control on tab 2, a grid and a scheduler control on tab 3..looks fine...i save it....close the form...reopen the form, and the controls are all resized and moved around on me....and not for the better.
wierd thing is that when i run the app, the controls are placed properly, but design time is totally f&*ked up.I know this one isn't me. is it the tab control? should i just do toggle buttons at the top and show/hide my own panels? this is just too freaky to deal with. is there an easy work around for this?
View 1 Replies
May 26, 2011
I have a problem. I have created a control, Now whenever I am going to Drug that control on my form then a error popup will appear that says "Failed to create component 'XXXXXXXXX'." System.IO.FileLoadException: A strongly named assembly required. HRESULT: 0x80131044 Is there any facility available in .NET for design time debugging Means If I drug a control on form then I will allow me to debug the control.
View 1 Replies
Jun 11, 2012
I created a custom control (inherited from a panel). Then I created some other custom control (textboxes)
I add the panel control to the form, then I add some custom textboxes inside the panel.
Now, if I remove the panel, the custom textboxes don't move. I think, because the custom panel control isn't the parent control of the custom textboxes.
How can I modify my custom textbox class, if I add the textbox to a form, to a panel, to a container, it should have that container as parent.
View 2 Replies
Jul 29, 2009
setting the default value for an integer attribute of a custom control seems to have stopped working. The following code adds the Maximum attribute to the design-time properties table, but the default value pops up as 0, not 99:
<System.ComponentModel.Browsable(True)> _
<System.ComponentModel.Category("Behavior")> _
<System.ComponentModel.Description("highest value possible")> _
[Code].....
View 4 Replies
May 18, 2012
I am using Visual Basic 2010 for a project.My project requires to place a TRANSPARENT button on top of an image (placed inside a picturebox). for that to work, i need to set the button's parent to the picturebox. Is there a way to do that in design time? I cannot find anything on the property tab. The reason i want to set it on design time is because my project will have a motherload of buttons and it will a pain to code the parent change....
View 3 Replies
Apr 30, 2011
This is a related to my last post, but not enough to make sense as a tag on question.I have a collection(of myClass) that is exposed as a public property in a user control.When I add an item to the collection in code I would make the call collection.add(new myClass) and of course the constructor for myClass is called.When I add items to the collection via the design time menu the constructor for myClass is not called.... of it it is called, I can't see any evidence of it.
View 3 Replies
Apr 29, 2011
I'm trying to make a simple User control that houses one collection of a class that I've made. After building the control All works as planned and then randomly when I try to go to the design time interface for the form I placed the control on I get an error page with the following:
To Prevent Possible data loss before loading the designer, the following errors must be resolved:(ignore and continue: which about half the time works and the control shows up and the other part of the time all of the controls on the page are missing)
The one error is the following:Object of type'System.Collections.Generic.List'1[StaticGraphPlot.clsStaticCurveData]' cannot be converted to type System.Collections.Generic.List'1[StaticGraphPlot.clsStaticCurveData]'.
[Code]...
View 2 Replies
May 18, 2011
New to reports here. Using VB.NET, my application makes use of datatables it creates from a postgresql database.These datatables are defined at runtime rather than design-time, and I would like some way of generating reports from these datatables at runtime as well.
Should I be trying to create the report template at design-time, and then "binding" a datatable to it at runtime?
View 1 Replies
Nov 26, 2011
i have a treeview which has a bunch of parent and child nodes preset at design time, there is 1 parent node tho which is called developer, that i want to add child nodes to at runtime.When the form first loads im trying to have it check a text file and for each line in the text file add the text/string from that as a child node tot he 'developer' parent node.
vb
Dim reader As String = My.Computer.FileSystem.ReadAllText(Application.StartupPath() & "ConfigDevs.txt")
Dim strs() As String = Split(reader, Environment.NewLine)
For Each s As String In strs
[code]....
Thats what i have so far, how can i set it so 'Dim parentNode As TreeNode = ' points at the 'Developer' node?
View 1 Replies
Dec 4, 2009
I have created a user control that mimics what a label does. I realize I could have inherited the label control, but I am working on understanding the process. I wish to add items to the control. normally (in the code of my project) would do:
Form1.Label1.Controls.Add(mylabel)
After creating mylabel in the code of course.
[code]....
View 4 Replies
Jun 8, 2009
I have a UserControl class in a Windows Application project. One of the properties of it is a collection of another class that I have defined. I can't seem to find a good example of how to get the standard collection editor working for it at design time.I got it working using some example code I found to a degree, but the data in my collection doesn't get saved. When I exit the form and open it back up in design time the data isn't there any more.Here is my class:
Public Class Gauge
Inherits Control
Private WithEvents _Captions As New CaptionCollection
[code].....
View 1 Replies
Jun 12, 2009
Can we make the Combo Box not drop down if we click on it even though it have item in the list, button not click-able even though it have the on_click event..textbox not allow to set focus but not in disable mode...everything like design time.. because I want to do drag and drop control like visual studio.. but I can drag now, just when I want to click the control to drag, the control still remain the default function...
View 1 Replies
Sep 26, 2011
How can i do this ... by the propper way i mean so that the grippers don't even display - like they do with an auto-sized label, or a non-multiline textbox.
View 4 Replies
Dec 22, 2011
I am upgrading user control from vb6 to vb.net.In the vb6 application I am loading 3000 labels using a label control array.In vb.net I am doing same but it's taking too much time to load.In vb6 it's taking 1-2 seconds, but in vb.net it's taking 30-40 seconds for same work. Why does it take too much time in vb.net for same work?Code is given below, here Led is the label control array.
For l = 1 To 3000
Led.Load(ledCounter)
ColLed.Add(Led(ledCounter))
[code]....
View 1 Replies
Feb 25, 2009
I am creating a user control that contains a panel as well as 4 string and integer properties. I would like to display the text of the properties in the user control during design time.
View 3 Replies
Oct 14, 2010
I am having a problem with the Visual Basic property collection editor .
I have created a Custom Type
Public Class Field
Private Item As Integer
Private Name As String = "FieldName"
[ode]....
View 1 Replies
Mar 26, 2008
In my never ending search for more knowledge, I have come across Partial Classes. I was wondering if some of the kind people who actually understand the uses could explain some of them to me. Now I know that when we create a form that we actually create a partial class which the generator rewrites when we add a control or change a property at design-time, and this allows us not to have to worry about setting up the controls ourselves.
[Code]...
View 2 Replies
Apr 20, 2009
I recently made some changes to my VB 2008 application, and now there are crosshatched lines throughout parts of my tab-control at design time. When executing the application everything looks fine, and there are no errors generated. Why has this happened?
View 2 Replies
Jul 16, 2009
I've written my code to implement a new property and to set the content to this default text and grey the text whenever the textbox is empty, and to hide it when the user starts typing. This all works fine at runtime.[code]My question is this : If I place an instance of the control on a form, and set the DefaultText via the properties grid, why doesn't my Property Set code run?I'd expect the control on the form to show my new DefaultText in the control, but instead it remains blank. When I run the form it does display correctly, but just not at design time. I place a breakpoint in the DefaultText set property code and it simply doesn't run.
View 2 Replies
