C# - Reset Runtime Changes To A Dataset With A Design Time Schema .NET
May 16, 2012
I have a small dataset which has most of its schema defined at design time, but I add a few columns to one of its tables at runtime. My problem is how do I reset those changes? he dataset is not linked to any datasource. It just has its own table which I "manually" populate. The static columns have been added to the datatable at design time. However, I add a few columns as runtime based on a list of categories. Like this:
[Code]....
The dataset is used in a small dialog that pops up within my application. I add the dynamic columns when the dialog is opened by using the Load event. Everything works great the first time. But if you close the dialog and reopen it, there are problems. My startup routine tries adding the dynamic columns again, but an error is thrown saying the column already exists. I have tried a lot of things and did some reading but I can't figure out a way to reset the dataset when the dialog is closed. The only solution is to close the whole application and reopen it. I have tried the following in the Leave event of the dialog form:
[Code]....
View 3 Replies
ADVERTISEMENT
Jul 26, 2010
In some of the forms ,whenever i change some properties using the Properties Window of some controls or the form they get reflected in the Properties Window but will not get changed at Run Time.
I am facing this in quite many of the forms, hence i am applying the property changes in form load, this is causing performance breach .
View 15 Replies
Apr 19, 2011
In a VB.NET winform App I want to place icons on each tab header of a TabControl.I set the ImageList property of the TabControl and for each Tab I set the ImageKey property.My icons show as expected on each tab at design time within the IDE but when I run the App, my icons don't show (an empty space is shown instead).
View 1 Replies
Jul 1, 2012
I use try catch finally to handle errors in my program. And these work fine when i debug application, but when i install it, error handling does not work?!
View 1 Replies
Apr 8, 2011
I want to ask a question about adding controls in design time (controls may be any win form control or a user control) and adding the control in run time.
View 2 Replies
Aug 16, 2010
I've created an SQL Query using the query builder. In the query builder, you can test the query by clicking the button "Execute Query", and entering the desired values in the parameter fields.
My query returns the correct results when I do this, but when I seemingly pass the same values at runtime, I get 0 records returned.The query is designed such that you can pass nulls if you don't wish to filter data by that particular parameter.
SQL Query:
SELECT ID, UPC, Quantity, Manufacturer, Style, Color, Size, Category, DateReceived, Cost, OriginalRetail, Retail, LocationID
FROM Inventory
WHERE (UPC = @UPC OR
[code]....
In the query builder "Execute Query" dialog, I enter a value I know that the db contains in the "Size" field, "1/1/1900" & "1/1/2199" in Dates A & B, respectively, and nulls for all other fields. This returns 1 record, which is just as I expected. It works correctly.But when I pass the same values into the method created by the designer, I get 0 records returned. I can't figure out where the problem lies. Even if I enter nulls for all fields other than the dates, it returns 0. This tells me that the dates are causing the problem, but I can't figure out why, because I'm passing strings equivalent to what I entered in the query builder.
View 6 Replies
Aug 13, 2011
I'm using .net 2008 Trying to create a small graphic component, I have a problem setting background both at design time and then runtime. I derived a panel like this
[code]...
But it isn't working! If I don't Overrides Property BackColor, this is working as expected but I really need to group in my custom tab.
View 6 Replies
Jun 19, 2011
Is it possible to create a menu at design time and populate it at run time and then display it at the mouse pointer when I click on a cell in a datagrid?
View 11 Replies
Jul 8, 2009
I am creating a custom Label control (by simply Inheriting the standard Label control and re-painting the background and text) because I need a very specific background and border. In the constructor of the control, I set the AutoSize property to false so I can have a standard default size for the new label.
Public Sub New()
/*Set the default size of the control to 75x24*/
Me.Height = 24
[code]....
In my application that uses this control, if I create the new custom label at run time (in code), the AutoSize property stays False, and it works properly.If I try to add the new custom label to my form at design time, it comes in with the AutoSize property set to True, and I have to manually set it to False in the properties window. It's not a huge problem, but I don't understand why the behavior is different.
View 4 Replies
Mar 6, 2012
If you know a bit about database design, you would mind glancing at this? I don't know if I my logic is right or not.Schools, players, and coaches can have awards. Schools have players and coaches, states have schools. - Am I missing something?As far as populating the database, I want to have static data entered into the database before a user runs the program and then allow them to add new information that would only be saved (to a save file, not overwriting the original static data) if they clicked a button. How do I go about this
View 10 Replies
May 18, 2011
New to reports here. Using VB.NET, my application makes use of datatables it creates from a postgresql database.These datatables are defined at runtime rather than design-time, and I would like some way of generating reports from these datatables at runtime as well.
Should I be trying to create the report template at design-time, and then "binding" a datatable to it at runtime?
View 1 Replies
Nov 26, 2011
i have a treeview which has a bunch of parent and child nodes preset at design time, there is 1 parent node tho which is called developer, that i want to add child nodes to at runtime.When the form first loads im trying to have it check a text file and for each line in the text file add the text/string from that as a child node tot he 'developer' parent node.
vb
Dim reader As String = My.Computer.FileSystem.ReadAllText(Application.StartupPath() & "ConfigDevs.txt")
Dim strs() As String = Split(reader, Environment.NewLine)
For Each s As String In strs
[code]....
Thats what i have so far, how can i set it so 'Dim parentNode As TreeNode = ' points at the 'Developer' node?
View 1 Replies
Nov 2, 2011
On the server side of my application I have a function like this:
public function GetDS as MyTypedDS
Dim dsRetVal as new MyTypedDS
'Make fantastic things with the dataset
return dsRetVal
end function
On the client side I call this function through a generated "service reference":
Dim ds as Reference1.MyTypedDS = myRefInst.GetDS
How can I disable schema serializaion of the typed dataset to reduce the traffic?Is it enough to set the SchemaSerializationMode of 'dsRetVal' to ExcludeSchema before returning it? Or is this option ignored by WCF?
View 1 Replies
Feb 25, 2010
Ok, I know this has been asked many, many times but I haven't seen the correct answer yet. When the database schema changes how do you update the dataset designer to reflect those schema changes without wiping out the whole dataset and starting over?
View 1 Replies
Jun 9, 2011
I have a form that has 1 text box and has 2 queries that locate the data. One is by customer ID and the other is by customer last name. They both work but when the code works and the user enters a customer ID and the query locates it then enters a customer last name it also locates it. If the user enters the same customer id again the query seems to fail. This is why I'm sure I need to add some kind of code to reset the Dataset.
Here's the code in the load sub procedure:
EditBoxSearch.Focus()
' Start out clean.
[code].....
View 1 Replies
Jun 26, 2010
I have an access database with 5 tables.I want to fill a dataset with the entire contents of the database.Why can't it roughly look like this?[code]Instead I'm having to create an adapter for EVERY table, tab the table name (why?), fill the schema, and then fill the table.
View 1 Replies
Jul 20, 2011
I've added a column to one of the tables in the database. Is there a quick to reset one of the datatables within my dataset so that I do not have to delete the whole datatable and add it back in?
View 3 Replies
Jul 23, 2010
I have some concern about designing Datasets. I was told that it would be good to have a dataset for each table for maintenance purpose. Because frequent change in database tables is expected, having one dataset including every tables would be pain to make the corresponding change in the application.
Q. is it good approach to have a dataset for each table ( I would end up having 30~40 datasets for each db table using Stored procedure) ?
I have a separate project for commonly used datasets. each project include "dataset project" as a reference, and use it by including needed dataset into Forms, classes, etc.
Q. Does this approach makes the whole system to be slower? If I have a set of datasets as a separate project, it would be beneficial, since It will be easier to make a change (I only need to make modification in one place)
View 2 Replies
Jan 30, 2009
using VS2008, targetting framework 3.5I have a rather complex UserConrol which does some of its own rendering.I display this UserControl on a form.Opening that form in the Designer creates an instance of the UserControl in the Designer, which tells me a NullReferenceException is occurring in one of my rendering methods.I have attempted to correct this by making alterations to the UserControl's default constructor, but have not found success.
View 1 Replies
May 20, 2009
I want to create a Timer such that I can reset the time to say 00:00:00 (hrs:mins:sec) and be able to stop, reset and start the timer as needed. I have actually created one from the scratch but it seems like it is long on code. Any ideas on how best to do this?Only performance counts!
View 19 Replies
Feb 11, 2011
Windows resets the IDLE time every time the user touches the keyboard or the mouse. My application needs to reset the IDLE time at specific moments, but how to do this programmatically.
The following does NOT reset the IDLE time using VB, C# or QT4.
- Programmatic mouse movement / click.
- Programmatic keystroke.
Somehow Windows knows these actions are simulated. How can I reset the IDLE time?
View 3 Replies
Jun 27, 2012
I have a php web service that I can call from a php client. I need to call this web service from a vb.net application. When I try to add a reference to this web service I get this error:The root element of a W3C XML Schema should be <schema>here is the top of my wsdl file:
<?xml version="1.0"?>
<!-- partie 1 : Definitions -->
<definitions name="raidService"
[code].....
View 1 Replies
Mar 23, 2012
Just started with VS2010. (vb)
Coming from VS2005. (i skipped VS2008)
My question is this. Why do I have to hit save before every build in order to see design changes at runtime? Example: I change the text on a button at design time. I click on run and the text does not reflect the change. But if I saved the form before clicking run, than it does. Also like to add VS2010 runs much slower compared to VS2005 running on the same computer. I understand VS2010 can do more, but a lot of times you don't need it to.
View 13 Replies
Jul 12, 2009
How do I reset My.Settings at run time to the initial default values. I want to do this after the app has been running and the user may have save changed settings. The intention is to reset evering to 'factory defaults' as opposed to the last saved value as done by 'settings.reload'.For example in the property below , I want to restore to the value to '90' as given in the default value. I want to do this for all settings.[code]...
View 4 Replies
Nov 26, 2011
Converted an VS 2003 VB Application to Visual Studio 2010. Conversion seemed to work great. Having trouble with the Backcolor of buttons. In design mode they are a light gray (I have them set to transperent and they are on a VBPowerPack.Blend Panel) - but in Runtime they turn the correct color (Steel Blue). How do I get design time to look the same as runtime? Also, they stay light grey in run time if I check Enable XP Styles. Makes me feel better to see the same colors at Design time
View 1 Replies
Jul 24, 2009
I have a question regarding the manipulation of a form at runtime. Let's say I created a simple form in the form designer before runtime containing a couple of buttons, text boxes and labels. While the program is running, I would like to change properties of these controls, while having the ability to move them around, along with the addition of newer controls, say a listbox.
After the form is 're-designed', I would like to save the new settings of my form, in either a database or settings file. Whats the best way to implement this?
View 4 Replies
Feb 1, 2012
I am getting a run-time error within my VB app: Run-time error '429': ActiveX component can't create object. It goes away after IIS reset.
View 5 Replies
Apr 12, 2010
For some reasons that I don't understand all my design changes won't show up when I hit F5 and run the application. I can put how many new fields and labels with som "hello" text that I wont but they are not displayed at runtime. But all database changes the report i connected to will be displayed.
How can that be? What is wrong with my report when all datachanges runs thru but not my design changes?
I am using VS 2008 and the built in crystal report and viewer.
[Code]...
View 1 Replies
Aug 9, 2010
Im having odd problems with how my form is displaying at runtime...if you look at the 2 attachments you can see at runtime the labels disappear under the check box's, but at design time they are positioned perfectly.
View 5 Replies
Aug 5, 2009
Not sure if I have the correct subject line. Here is my issue. I have a form with 2 GridView. One GridView has a list of all zipCodes. The users is to select a location from a dropdown list, then select the zipcodes he/she wants to be assigned to that location and then click the "Add" button. The zipcodes then appear in the second GridView. When the user clicks the "Save" button, the data is sent to the database. The is also a "Remove" to remove zipcode(s) in the second GridView.
How do I track changes only in the second GridView. There could be 1000's of zipcode in the second GridView. Do I just remove and re-insert the list for that location evertime the user click save? I was thinking of using a DataSet, add DataRows and then update, however I am not using a DataAdapter to load my dataset, so there is no way for me to use DataAdapter.Update(ds). I am using the SQLHelper.ExecuteDataset(parms)
View 1 Replies
