MS Access - Dataset - How To Reset A Dataset
Jun 9, 2011
I have a form that has 1 text box and has 2 queries that locate the data. One is by customer ID and the other is by customer last name. They both work but when the code works and the user enters a customer ID and the query locates it then enters a customer last name it also locates it. If the user enters the same customer id again the query seems to fail. This is why I'm sure I need to add some kind of code to reset the Dataset.
Here's the code in the load sub procedure:
EditBoxSearch.Focus()
' Start out clean.
[code].....
View 1 Replies
ADVERTISEMENT
Jul 20, 2011
I've added a column to one of the tables in the database. Is there a quick to reset one of the datatables within my dataset so that I do not have to delete the whole datatable and add it back in?
View 3 Replies
May 16, 2012
I have a small dataset which has most of its schema defined at design time, but I add a few columns to one of its tables at runtime. My problem is how do I reset those changes? he dataset is not linked to any datasource. It just has its own table which I "manually" populate. The static columns have been added to the datatable at design time. However, I add a few columns as runtime based on a list of categories. Like this:
[Code]....
The dataset is used in a small dialog that pops up within my application. I add the dynamic columns when the dialog is opened by using the Load event. Everything works great the first time. But if you close the dialog and reopen it, there are problems. My startup routine tries adding the dynamic columns again, but an error is thrown saying the column already exists. I have tried a lot of things and did some reading but I can't figure out a way to reset the dataset when the dialog is closed. The only solution is to close the whole application and reopen it. I have tried the following in the Leave event of the dialog form:
[Code]....
View 3 Replies
Feb 1, 2010
I have a dataset (WW1Dataset) with one data table(WW1).(database used in an access database) I'm trying to filter the dataset e.g a user wants to filter by a chosen surname (SurnameTextBox.text) so the datset is filtered to display only those records wherethe surname column in the dataset matches SurnameTextBox.text.
View 1 Replies
Oct 9, 2009
does VBasic allow a MS Access Database DataSet create a Stored Procedure or will it only allow SQL Database DataSet create SP...
View 4 Replies
Mar 15, 2010
When the user clicks an "Edit" button on my form, I want a box to come up which allows the user to edit a DataTable in a strongly-typed DataSet. What's the best way to do this?
View 2 Replies
Jan 28, 2010
I have code running in the Datatable.ColumnChanging event in my dataset. This dataset underlies a form and conventional drag/drop controls are in place for data entry.when the event triggers and runs, I am running code in the form that checks the dataset.HasChanges property. It is showing False. But this is immediately after the ColumnChanging event has been triggered.Okay, I see by others posts and MSDN that .HasChanges will only be true after moving off the row with the changed column. I have also noted lots of discussion about the advanced binding property of DataSourceUpdate Mode, but that does not address this issue.I guess I can do this by checking the state of the row for the binding source. Just seems odd that the event behind the dataset can be triggered and that does not change the dataset.HasChanges property.
View 3 Replies
May 14, 2012
I have tried everything I can to get beyond this error which shows below as <<<<< error here. It is trying to fill a dataset from a data adapter. If I change the SELECT statement to just SELECT * FROM xTable I get the correct number of records in each table. But anytime I try with a more complex statement I get the error message shown below which indicates System.Data.Common.DbDataAdapter.Fill(DataSet dataSet. I've completely erased all data and entered a new set of test data so I know there is no problem with relationships. Each table has primary key which is foreign key in other table. IS there something wrong with the Imports section: Imports System
[Code]...
View 2 Replies
Aug 24, 2010
i am trying to copy data from a standard Dataset to a Type Dataset (XSD) of same table structure. i want to use Automapper to do that one. So how can i do that using automapper?
View 1 Replies
Jun 5, 2010
I need to pick all data in my application from my database and use it in my form
my question : how to pick all data in my application then i use it
View 3 Replies
Jun 22, 2010
I have two Datagrids, One grid has all the customers garments on it with style number and contact length. The other grid has the users who have garment issued to them. the style number is in both grids. I need to loop through the users grid and say if the contract number is 1 from the first grid then the contract date on the second grid will be todays date + 365 days (year contract) I have looked at using a stored procedure and also a for each command but I am just getting stuck with it all. [Code]
View 1 Replies
Jan 4, 2011
I have a problem saving a dataset which contains rows that i have imported from another dataset. i can successfully view the imported rows in a gridview but i cannot commit the rows back to the database.
View 2 Replies
May 19, 2010
I have multiple datasets that I would like to combine into one. There is a common ID field that can be associated to each row. Calling Merge on the dataset will add additional rows to the dataset, but I would like to combine the additional columns. There are too many fields to do this in one query and therefore would make it unmanageable. Each individual query would be able to handle ordering to ensure the data is placed in the correct row.
For Example lets say I have two queries resulting in two datasets:
SELECT ID, colA, colB
SELECT colC, colD
The resulting dataset would look like
ID colA colB colC colD
1 a b c d
2 e f g h
View 1 Replies
Feb 18, 2011
ok, I've finally got my test database issues sorted out, however now I need to actually modify my existing report to add the two new fields from my test database. I have made a copy of the report so that I am not modifying the original. I have deleted the two old fields and now want to add my two new fields in there. In the Field explorer window, I see an object called "dataset1" and when I expand it, it is using a view that includes fields from the table that I added my two new fields to.
The problem I see here is that I have gone in and modified the view to include these two new fields in my test database - but again, they are not showing up as selectable fields here. I am just assuming that "dataset1" is somehow pointing to the live database again and that I need to change the datasource location.In my solution explorer, I see an object called "dataset1.xsd" but the properties of that do not tell me much about where it is actually pointing to...
[Code]...
View 2 Replies
Nov 25, 2009
I want to access data using both the datasets.
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Try
[Code]....
In my code i have dataset name ds and table named Info1,when i write ds after that how tablename is coming,its not possible? How to do that ?
View 5 Replies
Aug 2, 2011
i am looking to map a dataset of addresses on a map. basically, i want the users to type a street name in my town and be able to see the houses that have signed up already on that street. so a pinpoint should show up on the houses that came up on the dataset.
[Code]...
View 1 Replies
Jul 23, 2010
I have some concern about designing Datasets. I was told that it would be good to have a dataset for each table for maintenance purpose. Because frequent change in database tables is expected, having one dataset including every tables would be pain to make the corresponding change in the application.
Q. is it good approach to have a dataset for each table ( I would end up having 30~40 datasets for each db table using Stored procedure) ?
I have a separate project for commonly used datasets. each project include "dataset project" as a reference, and use it by including needed dataset into Forms, classes, etc.
Q. Does this approach makes the whole system to be slower? If I have a set of datasets as a separate project, it would be beneficial, since It will be easier to make a change (I only need to make modification in one place)
View 2 Replies
Dec 3, 2009
it returns date, and value by date.
for ex:
01.01.2009 454
02.01.2009 785
[code].....
View 3 Replies
Feb 26, 2010
I am having difficulties with Filling a dataset. It seems to be automatically assigning a datatype to the column based off of the first field of data it finds in that column. The column sometimes contains an integer, but it may also contain letters and numbers. If the first field is an integer, it says the fields in the column that contain a letter are DBNull. I'd like for the entire dataset to be formatted as a string/text type since I do not know what the values will be that I'm importing 100% of the time. How do I tell the dataset to expect a certain datatype for all columns and rows i'm going to import?
View 19 Replies
Apr 16, 2010
What is the impact of creating variables using:
Dim ds as New DataSet
ds = GetActualData()
where GetActualData() also creates a New DataSet and returns it? Does the original empty DataSet that was 'New'ed just get left in the Heap?
What if this kind of code was in many places? Would that affect the ASP.NET process and cause it to recycle sooner?
View 2 Replies
Jan 11, 2012
I have a datagrid which is already bound to a dataset, I need to get this dataset,make changes on some data, then rebind the datagrid with the modified dataset.
here's my code
[Code]...
View 1 Replies
Dec 3, 2011
I'm just starting to explore VB.NET datasets but I'm stuck on a (probably) trivial problem.I have declared a dataset (let's call it 'Fred') as public in a VARs module.In the main form in a sub routine called at the start of the project I connect to an Excel spreadsheet and read it into the 'Fred' dataset into one table (called 'Table')I then bind the dataset table to a datagridview and I can see the spreadsheet. Which is very nice :-)
Having loaded the dataset I want to be able to get some values so I created a button and used the following [code]....
View 5 Replies
Jun 12, 2009
I am developing an app. with VB and i have stumbled across a verry eary problem. Until 2 weeks ago everything was working perfectly but now here what is my problem:
View 2 Replies
Sep 11, 2009
I have written my main program which uses a datagridview however I seem to be struggling when trying to access the dataset items that have been deleted. Just before I commit the changes I want to record the user that deleted the items.
View 5 Replies
Jun 3, 2011
I have access Query have more than one table. I want to insert into it. I cannot insert into it by CommandBuilder coz CommandBuilder for one table only so how can I do that using DataAdapter with dataset.
View 6 Replies
Feb 17, 2012
So i have a DB with 3 tables. User Table with U_ID and U_Name, Class with C_ID, and C_Name and User_Class Table with U_ID and C_ID. Foreign keys are set.I want to display the classes associated with the selected user. The user is identified by their name. I know these are the two SQL statements I need to execute:SELECT U_ID FROM User WHERE U_Name = current_U_name
then
SELECT C_ID FROM User_Class WHERE U_ID = current_U_ID
then
[code].....
View 4 Replies
Aug 26, 2011
The SQL string won't return data from Access. I've tested this exact SQL String in Access and it works fine.First of all, Am I getting a SQL query from Access in the proper manner?Second... should I be using a stored procedure for this? Or is making a query from tables like this a good practice? Third, if I'm doing it right, why won't Access query return and fill my dataset?These are the results I'm getting.
Connection State = 1
Tables in Dataset = 0
Where am I going wrong?
SQL:
SELECT PageSetupData.Size, PageSetupData.Category,
PrinterList.Location, PageSetupData.isPlotter, PrinterList.LocationSuffix,
PaperSizeData.PrinterName, PrinterList.HasAltPrinter, PageSetupData.SetupTitle,
[code]....
View 1 Replies
Apr 16, 2010
I have a form in vb8 that is set up as follows:
I have a table in my Access database calledUsers that has a name and a password (encrypted).
Using the toolbar I created aBindingSource with a name of UsersBindingSource and a dataSource ofUsers
Using the toolbar I created aDataset called with a Name and a DatasetName called Users_Dataset
Using the toolbar I created atableAdapter called UsersTableAdapter
I added two textboxes on the form and changed theirDatabindings...Text property to the corresponding field in the Database.
How to now update the database when I click Update. What the program needs to do first is encrypt the Password before saving it. I wrote the code in the TextBox2.Lostfocus event to encrypt the data a place it back into the TestBox2 field. The only samples I find on the net refer to DataGridView controls (which work) but I don't want to use them. How can I get the database to accept these changes as well as changes to radio buttons or comboboxes?
View 3 Replies
Dec 17, 2010
new to vs2010 express trying to accomplish a simple task read records from a sql server DB table and add them to a table (different format eventually) in an access DB Sample code below seems to work ok up to the point of the data actually showing up in the access table.
[code]...
View 13 Replies
Feb 17, 2012
I'm confused about DataSources and DataSets.I created a DataSource (DataSet?) via the DataSource wizard called PPIDataSet. This has tables in it Customer, Vendor, Orders, etc.Now I want to access the data in these tables via code. So I'm expecting to be able to do PPIDataSet.Customer.AddRow or something like that. However, when I access the PPIDataSet object, in IntelliSense,I only get PPIDataSet.CustomerDataTable PPIDataSet.CustomerRow
How do I access the table data via the DataSet? Or do I have to access it some other way?
View 6 Replies
