I have access Query have more than one table. I want to insert into it. I cannot insert into it by CommandBuilder coz CommandBuilder for one table only so how can I do that using DataAdapter with dataset.
View 6 RepliesThis is how I update a table using DataAdapter and DataSet in VB using SQL Server[code]...
I know that the Fill method does not make sense in case of an INSERT statement, but I am new to this technology and the above statement does the job and updates the table w/o problems. My question is this: If there was an error (say a duplicate key error) how would I know this in my application? Should I be putting the above code in a try/catch block?
Also, if there is a "proper" method for running INSERT statements using a DataAdapter/DataSet combination that does not use the Fill method, please indicate that as well.
1. Can someone show me sample codes on how to do that ?
2. I encountered a problem with the INSERT sql statement. I keep receiving syntax error in insert statement exception. Is there anything wrong with the statement ?
[code]...
The SQL string won't return data from Access. I've tested this exact SQL String in Access and it works fine.First of all, Am I getting a SQL query from Access in the proper manner?Second... should I be using a stored procedure for this? Or is making a query from tables like this a good practice? Third, if I'm doing it right, why won't Access query return and fill my dataset?These are the results I'm getting.
Connection State = 1
Tables in Dataset = 0
Where am I going wrong?
SQL:
SELECT PageSetupData.Size, PageSetupData.Category,
PrinterList.Location, PageSetupData.isPlotter, PrinterList.LocationSuffix,
PaperSizeData.PrinterName, PrinterList.HasAltPrinter, PageSetupData.SetupTitle,
[code]....
I am trying to call a SELECT query (with parameters) in Access from VB.Net 2008. I am able to call queries without parameters using the code below. The problems are (1) how to apply the parameters to procName and (2) how to get a dataset returned. I have looked around the net for hours and have found some examples. However, they are all for ms access action (update, delete, etc) queries using ExecuteNonQuery which does not return a dataset.
[Code]...
I have an issue with calculating a total from my dataset. For some reason the number of plates produced on the StartDate is not being added to the TotalPlates in my program.Here is my query and calculation of total plates produced:
Dim Plates_Query As String = _
"SELECT *" & _
"FROM [PlateHistory_Query] WHERE (PlateDate) BETWEEN #Start# AND #End#"
[code]....
Can you explain to me what they a
View 1 RepliesI am using a sql server database and i am storing the time value in the datetime variable. I am developing a booking system application in vb.net. When I want to view already made bookings using datagridview and by implementing dataadapter and dataset...When the table is shown in the datagridview I want custom column names to be shown so tell me that how can i use alias in the query given in datadapter initialization part?
View 1 RepliesI have an application with a number of forms that basically access the same data (or subsets of it)Can the data adapter, connection object etc be opened in a module so that all the forms have access to them to avoid writing the same code in each form?I had a go at doing this but they seemed not visible to the form?
View 8 RepliesI'm having trouble updating a sql server database with a dataset using a dataadapter. I have used the dataadapter with success in the past when adding new rows, using a single table, and just calling the dataadapter.update command.However, I am now running into a more complex scenario and I need to use dataadapter.UpdateCommand method and I'm having lots of problems.
The sql statement that I'm using to fill the dataset looks like this: "Select [Order Details].ProductID, [Order Details].UnitPrice, [Order Details].Quantity, [Order Details].Discount, Products.ProductName From [Order Details] INNER JOIN Products ON [Order Details].ProductID = Products.ProductID Where OrderID='" & strOrderID & "'", sqlConn"
This is pulling the data from 2 different tables (Order Details and Products) and then joining them and filling the dataset, and I am seeing the exact results I want. I am then binding the dataset to a datagrid control that allows the user the option to edit the datagrid, which in turn updates the dataset.
So that being said how do I get the updated dataset back into the database? I tried using dataadapter.update but it informed me that I now need to use dataadapter.UpdateCommand. Ok, so I've looked up how to use UpdateCommand but I cannot for the life of me figure out how to set up the right sql command statement. Part of what has me confused is the UpdateCommand examples I have seen are working with a specific row and updating that rows data. I can get that to work but I want all changes to the dataset to persist and update to the database when the user is done working on the datagrid.
Also, the examples shown set up command parameters but again, this is only confusing me because I just want to send the whole dataset back to the database. It seems like the parameters are saying "Ok, this specific row in this specific dataset.table, update these specific fields in this specific database". I'm not sure how to accomplish that when working with a datagrid.
i try to use this yesterday it work fine..now, it will process too slow.. when fill the dataadapter into the dataset..here is the code it gives 20 menutes still no result.. "no error, no comment. it's like standby
Dim conn1 As MySqlConnection = New MySqlConnection("server=pc1;user id=user;Password=12345;persist security info=True;database=mytsmobile")
conn1.Open()
[code]....
Is there any difference in the
1) If I insert a row into a sql table using insert query and
2) If I fill a datatable in dataset and add a row to it and again use the dataadapter.Update method for inserting this row.
I am trying to make a little search system, so the user can enter a search parameter which then populate a DataAdapter, DataSet then DataGridView with the selected data then any change the user makes in the DGV are then commited to the MS Access (97) Database when a Update Button is pressed. This is what i have so far, at the minute it seems to populate the DA, DS and DGV but when i come to press the Update Button I get a pop up box with a long error message:
Private Sub btnSearch_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSearch.Click
connetionString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source= " & frmMain.varDP_System
[code].....
I am connecting to an Access database and using a parameter query with the LIKE operator to return all rows that match query. The string to search for is taken from a Textbox
sql =
"Select * FROM Allview WHERE Info Like" &
"*" &
CStr(TextBox1.Text) &
"*"
The query does not return any data in vb, but when run from access with same string, there is data returned.The connection to the database is done correctly, as I am able to return data with various other queries.
Partial code :
Dim
con As
New OleDb.OleDbConnection[code]....
I am trying to run a query an Access db from VB. The general query which I want to run is
SELECT * FROM Patient WHERE Patient.PatientID = ?
or SELECT * FROM Patient WHERE Patient.PatientLname = ?
I tried using an input box which captured the user input and pass that variable to the query, but that failed. Then I read about writing a function and using that, however, I keep getting an error which says Function not defined, but when stepping through the code, it seems to work. Here is my function: [Code]
I have a form that has 1 text box and has 2 queries that locate the data. One is by customer ID and the other is by customer last name. They both work but when the code works and the user enters a customer ID and the query locates it then enters a customer last name it also locates it. If the user enters the same customer id again the query seems to fail. This is why I'm sure I need to add some kind of code to reset the Dataset.
Here's the code in the load sub procedure:
EditBoxSearch.Focus()
' Start out clean.
[code].....
How does one complete this query in a Dataset(VB.NET)?
Declare @Username as varchar(20), @Address as Varchar(20)
Select @Username=Username, @Address=Address
from EmployeeDB.EmpInfo
Where ID = 1
How do you query a Dataset with SQL queries? I'm using VB with Visual Studio 2005. I've got a large library of SQL queries I'd like to run in-memory on a Dataset.All the examples in the documentation show how to "query a dataset with code," but none show how to run a simple SQL query against a dataset. I've seen other threads that say you can do so, but no code examples. Can anyone provide sample code to show how you would run a simple SQL "Select..." query (using the same syntax you would use to query a database) on an in-memory dataset?
View 3 RepliesI have created a query in the DataSet Designer and now I would like to run this in a code to get the result of the query. Its just number which I get back and with this number I would like to continue working in the code.I know when I have a field connected with the Data sources I can launch it like this:Me.ProduccionTableAdapter.DowntimeHorasTrabajadas(Me.SHFDataSet.Produccion, datefrom:=DateTimePicker_From.Text, dateto:= DateTimePicker_ To.Text)but how do I do this when I dont wanna associate it with a text field and I just want to get the value into a variable?
View 1 RepliesI have a dataset (WW1Dataset) with one data table(WW1).(database used in an access database) I'm trying to filter the dataset e.g a user wants to filter by a chosen surname (SurnameTextBox.text) so the datset is filtered to display only those records wherethe surname column in the dataset matches SurnameTextBox.text.
View 1 RepliesI have a data table in my dataset which was created with the following script.[code]
View 6 RepliesI have an application that uses bound controls on the form. I have a dataset associated with my form and have a custom query written for one of my tables that is supposed to get two fields in the database and order them by their ID in descending order. However, when I run the program, the bound controls do not contain the last record, but the first.
View 8 RepliesI've written a bunch of queries that bring back a set of results that look like the following. I have a user level column in an employees table which I'm trying to pull the value from. Only one result (number) will ever be returned. For instance the query will be like: Select username, userlevel from employees where username = "joe" So i'd be bringing back just the level, say 7.
[Code]...
I have a dataset called Me.VelocipedeDBDataSet and there is a table within the dataset called Contact.How can i check the contact table and output the results of rows which have a value for an attribute called AccntRep that matches a global variable known as repNo
I had though that the solution may be something like
If Me.VelocipedeDBDataSet.Contact.Rows.Contains(repNo) Then
Panel3.Visible = True
MsgBox("Account Rep Found", MsgBoxStyle.OkOnly, "Account Rep")
End If
but it has not worked,
I query on the data bank with Ado, put everything in a Dataset, changes the data and then lets it write in the table. How can it be that is written in all lines except the first one? I do not find any error. Someone can help me? Here the code:
[Code]...
I added queries to my dataset via the designer. Is there a way to use variables in those queries?
View 1 Replieshow to pass a parameter to a predefined parameter in a dataset. I've found everywhere a solution if you build the sqldata adapter and the dataset in the code. Then you can pass the parameter like: da.SelectCommand.Parameters.Add("@param1", SqlDbType.Char).Value = param1_variable (as example)
But if you have builded a dataset (with table adapters), and then in the form app you want just to pass the param1 to a DataGridView1 (as example) which is using the table adapter, I did not find how to do this.
I don't have the same problem when using an untyped dataset.
OK. I have a typed dataset MyDS with a typed datatable MyTable (TableID, Title, Message).
The table gets filled with results from two tables, using a UNION ALL
Select
TableAID,
TableATitle,
[Code]....
Is this how typed datasets handles UNION? I didn't want to create two typed datatables and create separate SQL for each and create a relation.
I have a dataset column that I am keeping comments in. If the row has no comment in it(defualt string value is "", not NULL), I don't want it to show up on my report. How can I fill only the datarows that have text in them and not the ones that are empty. I've tried to filter the columns results by Not Nothing, but everything shows up. I'm guessing because it's actually not NULL since the string is "". How can I filter these results correctly?
View 2 RepliesI have created a DataSet.Within the dataset I have 2 DataTables.I have created a DataSet.Relations between the two tables.Now, using DataSet.DataTables.Select.... Would it be possible to perform a search similar to this in SQL?
SELECT * FROM DataTable1
INNER JOIN DataTable2
ON DataTable1.KeyColumn= DataTable2.KeyColumn
[code].....