I have strings here, each stored individually
a = hello
b = bye
c= hi
Label1.text = a
label1.text = b
label1.text = c
It is in the command button sub and I want them to show respectively when the button is clicked like this:
a first, then b, then c.
I'm creating a series of labels at run time based on an array of strings made earlier in the program, but when i run, the labels aren't showing. The program is form based and the co-ordinates for the new labels are well within the bounds of the formHere's the code I'm using:
For i = 0 To 10
Dim lbl As Label
lbl = New Label
[code]......
I have a form showing a datagrid with info from a database. It also has 2 date pickers to filter the database results. It shows everything perfectly in the datagrid, so the db connection is ok. But it also has a few labels below, showing some info taken from the datagrid. For example, the datagrid has sales information and the labels below show the total sales. This works fine too.But the problem comes when I open some other form, maximize it and then open this form containing all this stuff (while the previous one is still open and maximized). These labels (along with a few more labels that only contain the '$' character) get on top
of the datagrid. Even if I restore the form to its normal size the labels are positioned wherever they want. The weird thing is that this only happens with some labels and not with all of them.My first guess was the anchor property, but I set it to left-bottom and it still does this.
Using 2 forms how would I click one button, from another form? ie In VB 4,5,6, I would used to do it as:-
Form 1:
private sub Command1_Click()
msgbox "Say Hello"
End Sub[code].....
If I clicked the button in form2, it would automaticlly, click the button in form1. Do I, do it the same way in VB Express or has it changed?
I have numerous buttons on a form, one each to select a playing card (52 buttons). When the Card(button) is selected I want to highlight it by changing the border from black to Red, then if reclicked from change back from red to black, easy enough (if then else). So that I do not have to copy this code 52 times I wanted to create a module as follows:
Sub ChangeButtonBorderColor(ByRef ButtonName)
If (Equals(ButtonName.BorderBrush, Brushes.Red)) Then
ButtonName.BorderBrush = Brushes.Black
[code]....
How to make a link button visible after another button has been clicked in asp.net(vb) in button_click()
it says error as "Object reference not set to an instance of an object."
i've done this in my code
Protected Sub InsertButton_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim receipt As LinkButton = FormView1.FindControl("LinkButton1")
' receipt.Enabled = "true"
[Code].....
I have already done the creation of button and the dragging of button at runtime already.But now i need to know how do i save the last dragged button on the form and also detect the name of the last clicked button.so lets say i now drag a button to coordinates 25,254. so when i exit the form and the next time i launch it, the button will still be at 25,254. and this one will go on for the number of button i created like 100. so when i launch the form the 100 button will be at the exact position where i last saved them.the second part is lets say i created button1 and button2 on the form in runtime. so when i clicked the first button, it should display button1. and if i clicked on button 2, it should say button2. same goes for like 100buttons.
[code]...
i have a form with 10 designated slots for letter to be entered (Like the free letter spaces on hangman), above these are 10 adjacent labels with a full stop "." as the text value, now i have created a button, Q to detect whether there is a. in the first box, and if there is enter the letter Q (Letter1.text = "Q"), elseif check the same for the second box. Now my problem is when i click the button, it still does nothing and letter 1 remains "." instead of "Q". also how would i end this string of else ifs? as in what if every text box is full then do what?
View 2 RepliesI am developing an application in which there are more than one buttons and i want to add some code on the click of every button, But I wished to know that which button has to be clicked by the user and after that some code will be executed and that code will be different for different buttons.
View 1 RepliesI have partially coded a project seen below:
Public Class frmBroadwaytickets
'Defining the cost per ticket
Const _cdecticketprice As Decimal = 153.5D
[Code]....
My btndisplay cost works, but my btnexitprogram does not close the application when clicked. I've ensured the button is correctly named and enabled. But when I click it does not close out, I use this simple code in other programs and it works.
I have a calculate button that, if clicked more than once adds the total of what I previously had to the new total as I am using a loop. I was thinking that I could get around this by only allowing the button to be clicked once, and if the user attempts to do this more than once a messagebox will appear saying that you can only calculate the price once and the form resets but i can't seem to get any code working.
View 4 Replieshow can i check if a command button is clicked in vb.net 2003?
View 1 Replieshow can I get this .bat command to run after my button is clicked I can make it like, "Run a certain .bat when button is clicked" , but I don't want that because people can go inside my .bat and hack my IP. So I was wondering is there a way I can put that .bat command into my VB 2010 Express
[Code]...
Private Sub Button_Click() Handles Button1.Click, Button2.Click, Button3.Click
MsgBox()
End Sub
[code].....
how can you make a song play in vb 2005? I want it to play after a button is clicked.
View 2 RepliesI need an example of a code that disables its function of the button when its pushed more than 1 time..
how can i arange that?
so an example:
2 buttons 1 label
when i press "button 1", label get a number 1
when i press button 1 again, label is still number 1
when i press button 2 and after that button 1. the label got the number 2!
I am working on a project and i am required to set up a 2d arrray of buttons. This part is fine and working. My problem is detecting the name of a button when it is clicked. I have a feeling it has something to do with sender, but i just can't crack it. If you need more info or code, then just ask.
View 10 RepliesI need to set a variable , say Flag=1 when a button is clicked.
How do i set the Flag=1 and this variable can be used in OTHER application? Meaning this Flag is set in Program A, then Program B will use this variable (always updated value). I wrote application in VB.NET.
I think app.config isn't that good (use the add key="" value "" ) because when program is executing, it will lock the app.config file.
This Flag variable will be changed according user input (button click) and i try to make this variable use across other application. How to do this?
I have an asp button which I am using in 2 different places (appending to a new place and adding a class using jquery under certain conditions). I need to slightly alter the function that runs when this button is clicked depending on whether or not this button has a given class. Is this possible? So something like this...[code].....
View 1 RepliesI have the following radion button in VB.NET
<asp:RadioButtonList ID="rbedit" runat="server" RepeatDirection="horizontal" >
<asp:ListItem Value="1" >Yes</asp:ListItem>
<asp:ListItem Value="0" >No</asp:ListItem>
</asp:RadioButtonList></td>
I need to figure what button the user clicked on and then set a variable with that value.How would I go about doing this?
when Button1 is clicked I want the cursor to change to the Hourglass cursor.
View 4 RepliesHow can i check if a command button is clicked in vb.net 2003?
View 2 RepliesI have two text boxes (txt1, txt2) and an exit button (btnExit)In txt1.Leave event; i have some validations. If validation fails then I keep the fous on txt1.If btnExit is clicked then I do not want to execute the validation and instead close the application.. How do I do it?
View 4 RepliesI have the following problem:
I've got 3 lines
If I click the "next" button
Line 1 shall be highlighted
Then I I click ""next" again
[Code].....
a for i = 1 to 3 to loop within the Button1_click makes i directly 3 of course so line 1 and 2 will not be highlighted.
I am not allowed to use a msgbox in between cause then it would be easy, cause I would wait until "OK" would be pressed...
How can I make this for i = 1 to 3 loop work and highlight the lines 1, 2 and 3, one by one after pressing the "Next" button?
I need to display two images when the button is clicked. First the user will browse for the two images and after clicking the third button it should display the two images. I have this code so far. I'm a complete newbie in vb
Dim dialog As New OpenFileDialog()
If DialogResult.OK = dialog.ShowDialog Then
TextBox2.Text = dialog.FileName
End If
How do you fix this code so it works?
Code:
Public Sub btnExit_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click
[code].....
can you check if a certain button is pressed
View 2 Replieshow to check if a command button is clicked in vb.net 2003?
View 5 Repliesi forgot how to check if a radio button is click or not.[code...]
i just need this or else none of my program will work.
this should take a matter of seconds for someone to sort out, I wish to show a decimal value less than zero when button one is clicked ie
[Code]....