i tried finding some links from this forum , however still can't get my problem solved. Anybody who has done some projects on stimulating images using sensor of an accelerometer..kindly step forward to assist..Below are the part of code which i can only move the car from right to left..I thought of making the car move in different directions (diagonal ways, up down etc.
[Code]...
1 how to work a robot with vb ?
2 how do i recieve input from robot sensors ?
3 how do i send output commands to the robot ?
4 can you refer me to sources about the above ?
5 can vb interact with the software tobotbasic ?
6 is there a vb procedure for recieving text strings from another software that runs at the same time as a vb application ( like a revese getkeys()
7 can vb send commands to a robot via bluetooth if so how ?
how to incorporate a PIC with VB.
I`m trying to find out the steps needed to achieve that, i`m i correct?
1) i need to find a PIC that is suitable for my project (to handle wireless motion sensors)?
2) I need to write the code for the PIC? (does the manufacture of the PIC provides an environment to write the assembly language?)
3) Then i need to write the vb code?
4) Finally to use a serial port to create a communication between VB and PIC. Also are their any all ready made PIC`s that can support VB code direct without the need of writing the assembly code?
I was thinking is there anyway VB2005 can be done if I create an animation( car) such that its movement can me opearted using another external component(example a sensor).
View 2 RepliesI just wanted to know if visual basic 6.0 or Visual Basic 2010 can be programmed to create a system that uses both smart card reader and sensors (photoelectric sensors) and be recorded their information into a information management database for date and time log.
Example:
1. A personnel will have to tag their smart card to the smart card reader. It will then be checked from the database and approved if their record is available in the database.
2. He will then have the access to enter and take a particular stuff from a rack (which has the sensor) guarding on each item on the rack. If the personnel take the item. It will then be logged into the database for the 1. personnel I.D, 2. item position on the rack, 3. time and date when the item is collected.
Question:
1. What hardware are needed to incorporate all this (smart card reader and sensors to database)? a controller perhaps? terminal for all the sensors?
2. What software to create the information management database so an authorized personnel may check the event history? also software to incorporate with the sensors? will it have to be on separate software or all can be done in the package given in VB6 or VB2010 or an additional software to be used?
3. Does MSComm Control have any relevance on this subject? All i know is what it does (vaguely) and no idea how to implement it.
The idea is to scan a folder of images and then let the user navigate back and forth through the images using a couple of buttons.The problem is, I can only get it to return a single image, and not the whole lot. It's looks to me as though the images are getting assigned to the same index in the array. [code]
View 2 RepliesWhat type of connector do i need to actually save the Map data like point of the images (x,y coordinate) into the database . and then retrieve it to show on the page in asp.net and how do i go about doing it.
View 3 RepliesThe app i am working on is for creating theme for the iPod touch... It has to deal with LOTS of images (100's potentially) There will be the set of default images, and then the user created replacement images. I started loading all the defaults into a resx file... thinking then I could just pull them out. now that I started setting the default, this sucks! lol the app will do this, on load it will set all the images (variables) to the resx images then when a theme is loaded, it will replace the default with the user image (if the user img exists) otherwise, the default stays. Then the "screen" is drawn to show the user. so, here is just the images to build the wallpaper, dock, and status bar...
[Code]...
I was thinking to make an app to save images [or download images] to local hard disk. But to keep it easy, I want this app to create a small picturebox on form to show the thumbnail of downloaded image. Lets say a 5 pictureboxes has to be added with the thumbnails to show the recent downloads. A user can save the location where he wants to save the files on hard disk. A listbox or a dropdown menu will help in categorizing the images, like image1 in friends section, image2 in family section, image3 in others, etc... When the program restarts all the latest 5 thumbnails has to be loaded in pictureboxes and the directory that was chosen. Finally, a button that shows the downloaded images into original image file size one by one or a slide show. Is it possible to make such program?
View 2 RepliesI am developing a visual basic 2008 express edtion program of an organisation that should get images from the system and display on image/picture box. further the program should save the displayed image in access database so that it can be retrieved together when you want to search the information about that particular employee.
View 7 RepliesI need this for my program. There is "add images" button where you can load multiple images and those images should be show on listview after loading.I have been trying to make this but could not get it work.
View 6 Repliescan we use images in the resource folder as background images by setting the background image during run-time by coding?
View 5 RepliesI have a program that will get a hash of the image but the problem is that I have to do to manually.I have a set of images of a folder names images(C:/images/) and ill be choosing which of those images i want to upload to my database.So far I got my program to work with database and such, wat I need is, if its possible I but the folder path on OpenFileDialog and I was a image to show in Picturebox1, then if I press button1 it will go to next picture.
View 1 RepliesI have placed several PictureBox Images of different colored dots(which represent lights) on an image of a Christmas Tree. I can make the lights randomly flash using a randomGenerator and a Select case statement. However, the code is very long. There are 67 lights on this tree and the code is 71 pages long. There has to be an easier way to do this. So far I have tried the following with two images of lights just to see if it would work and it does not work:
Dim picLight(2) As
Boolean
For intX
[code]....
I've been coding using vb.net for a while but I've been using imageLocation property to set an image for a picturebox or for the background image of a form. How do I use those images in my Resources Folder in my solution explorer to set an image for a certain picturebox or form. I sorta need a code for it.
View 7 RepliesI'm creating a form which is basically an image in a picture box that I use the graphics object to do drawstring's and drawimage's upon.I keep track of where I'm drawing these things so that I can click on them later and do various things (launch external apps - whatever).Is using a picturebox and the graphics object the best way to approach this.
View 1 Repliesi am creating a web browser using microsoft vb.net 2008 and i want to save all images only displaying on any web page in my browser. i have added check box to save images. browser.PNG when i click on check box , the browser will prompt to save only images files on web page.
View 9 RepliesI am making an that uses an external dll which should hold all the images used by the app. I know how to do this i.e. add images to resources or imagelist, then return them using a function which is referenced to. But, I have no idea how to tag the images so that I can obtain an idea of the images belonging to that category.
E.g. My dll has 100 pictures of houses. When the person looks for "white" I should be able to look through my tags for white houses as soon as possible. And at any point, if I wanted to, refer to the images programatically (that part shouldn't be a problem). So the only problem is tagging, what is the easiest/requires least amount of code to be written for?
How would I turn single images into animated gifs and vice versa? Is there an existing library for such a thing?
View 1 RepliesI'm working on a little project and I'm having an issue with the amount of time it's taking to create a 100 x 100 grid of picture boxes. Currently what I'm doing is creating the picture boxes dynamically using a timer with a progress bar because of the fact it takes so long it will look to the user as if the program just froze up.The images don't need to actually be contained in picture boxes, but I do need to be able to call mouse events off of them. I tried using a tablelayoutpanel, but for some reason I can't find anything on google on how to target individual cells.
View 3 RepliesHow can i add images in a dll for resource. I don't want to add them in the resource.resx.I want them in a dll but how can i do this?
View 3 RepliesI add an image to the program where the image is listed in solution explorer, do I still have to include the file? Its not embeded in the program right?
View 2 Repliesi was just wondering if it's possible to add images to a textbox. i have a feeling that maybe richtextbox is capable of such. so much work to do and so many choices to choose from...
View 2 RepliesI've tried putting the images inside of the resources and calling it but that doesnt work. I've tried making a function that returns a resource but I got confused and couldnt think of how to do it.
View 2 RepliesI have a source image and another image. I am wanting to compare the two images and tell me if they are the same.
View 3 RepliesIs it possible to compile images ("Img1, Img2,Img1000" and so on) into a .avi video format or any other kind of video in Visual Basic? If so, how?
View 2 RepliesCopy all images by FTP?
View 4 Repliesi have an array of directories. I use these file paths to display pictures in 34 picture boxes.I want to click on the forward arrow and display the next 34 images.[code]The attached image shows the 34 posters, i want to click on the arrow and display the next 34 images
View 6 Replieshow can generate (and display) images on the fly for simple charting, resizing etc?
View 3 RepliesI have this code to download a picture / file from the internet, but I get an error saying acess to the file path at which I want to download it is Acess denied. I know the file is not Acess Denied because it is my desktop.[code]...
View 11 Replies