I'm using a DLL in my program that is free to use in non commercial environments and it generates a dialog box every time I debug my program to remind you that it's not free for commercial use etc.. At first I couldn't care less about the popup dialog box but when your programming all day it gets really annoying. is there a way to suppress those popup dialog boxes or do I just need to go to my happy place and ignore them when they pop up?
I am using webbrowser control to navigate and download file.what i am doing is when i click download button on my webbrowser control to download file,it give me popup to save or open file and after clicking save button it give me save as dialog box for where to save.Now what i want to do is when i click on download button in my webbrowser control ,i want file to be downloaded in some folder in my pc (suppose in D:/temp/) without above stated two folder
I am writing a program for FEMAP API interface in VB 2008 Express. Some API commands open user dialog boxes which requires yes or OKcancel inputs. So much for automation "Sendkeys" do not work, because code execution stalls at the line which opens the dialog boxes. I need stg that runs in parallel, watches for these dialog boxes, and sends the right keystroke at the right time.
I'm programming a mass emailer for my newsletter using Outlook.Everything is working great except for two security dialog boxes...The first is how long I should give my application and the second is "if I should let my program send out the email".I do really understand this is perfect security but I need to have Outlook trust my application.These newsletters are going to 1000 people and this would be really tedious if I had to click each dialog box.
I am completely new to Visual Studio 2010 and don't know anything about coding.I'm making a program that has lots of dialog boxes. When a user clicks Ok on the dialog, I need it to close the existing dialog box, and open another dialog I made, and so on. Does anyone know how to do this?I'm using version 10.0.30319.1 of Microsoft Visual Basic 2010. English version
I have a very annoying problem and I'm trying to find the simplest solution possible, but I seem to keep complicating it.
My program displays a custom dialog box using the ShowDialog function (I create this form using a New constructor), but while my program waits for input in the dialogbox, my program continues to run other code, (I'm assuming initiated from other messages, but I still can't find good information on this, so as an aside to this topic does anyone have a reference about this), and arrives at this same point where the dialog box is to be displayed and displays it. So I end up getting a flood of dialog boxes.
My goal is prevent this excessive amount of dialog boxes. If the program arrives at this dialog initiation point I would like it to wait/pause until the first dialog box is finished.
I'm rather new to programming in general, but I have written a rather useful program for the company I work for. What I am trying to do is control the way a dialog box is displayed. I want a dialog box to pop up at certain times like 7:00 PM, 8:00 PM, etc.
I know this topic is all over the web, but I seem to have a combination of issues that is either not addressed or I can't figure out that they are addressed. Here is what I am doing. I am using Webbrowser to log into a a website and navigate to a specific page, enter some query criteria and click a "search" button. This button produces a table of files that fit the criteria. I then go through the table,navigating to the file names and compare against my database to see if I want to download. This all works well.
The issue: there is no URL behind these file names. It is a JavaScript. I am able to call the file with invokemember("click") but I get the pesky dialog box or Open or Save. Then I get the directory dialog box.
I have tried sendkeys, trie to capture the Webbrowser_downloadFile event, tried ObjectForScripting(not sure I did that correctly), all to no avail. I have tried to use WebClient, but since I do not have and actual URL for the file, I did not expect it to work. I can navigate to the href attribute, but not sure how to use it.
I am writing a Windows Form program to automatically download and store generated PDF reports from a web site using the WebBrowser Control. The web site uses Ajax to link an icon back to the source aspx file which then returns a PDF file.
The problem I have is that the WebBrowser control brings up the File Save As dialog box when the PDF file is returned and I can find no way of handling this to cature and save the returned file. I have found other examples of how to manage this using the Navagating event to validate the extension of the file that is being accessed (e.g. [URL] and, if not an HTM, file then use the HTTP Web control to directly download the file. Unfortunately this will not work as the call references a .aspx page.
i am trying to automatically generate multiple text boxes on a form with the following code
Private Sub CreateTB(ByVal x As Integer) Dim y As Integer = 1 Do Until y = x
[Code]...
i need it to generate as many text boxes as the variable x states, so i used the do until loop thing. But i am stuck when it comes to naming the text boxes because obviously all the text boxes cannot share the same name. so i would like to know how to programmatically name each textbox uniquely.
The radio recently broke in our bedroom and as a result my missus now listen to various radio stations through her laptop. She moans that visiting various pages and clicking the 'listen' link is a bit of a pain.(Note to self: Must buy new radio!)In the meantime, I have made a 'radio player' in VB 2008 Express, which is nothing more than 6 buttons down the left hand side of the 'player' I have created and a Web Browser Control on the right hand side.Clicking each button links to the relevant player of the station she wants to listen to. (Being a newbie to VB and programming, I'm quite proud with what I've achieved so far!!)Anyway, one station I do link to gives an "Are you sure you want to navigate away from this page" prompt: [URL]Is there a way to suppress this message in VB, or even auto-answer OK somehow?
The other sites I have linked to do not display this message, they just navigate away quite happily. Clicking OK on the prompt is no real hardship either, I hear you say, but in the interests of usability, I would just like it to navigate away from the site/player without prompting.Remember, I'm using Microsoft Visual Basic 2008 Express Edition.
I have written some code to extract data from Essbase. Before retrieving the data I Zoom In on one of the cell and then run the code to retrieve data. However, after successfully retrieving the data it zoom out to show only top generation. How can I avoid Zoom out after retrieve?
I have a simple desktop application that uses a .NET setup project (.msi file) to perform the installation. On the first installation, everything proceeds in a timely fashion with good feedback for the user.The problem occurs when the user is installing the latest version of the application over an old version on their machine.There is an unacceptably long delay of about 60 to 180 seconds from the time the installer's 'Welcome' dialog [It's not the Welcome dialog, I've removed that from the Start section of the setup project and replaced it with a CheckBox dialog to ask if the user wants a shortcut on the desktop] disappears until the 'Progress' dialog appears. The user sees minute(s) of blank screen and thinks the install has stopped or failed.
In the setup project properties, I've got the 'DetectNewerInstalledVersion' and 'RemovePreviousVersions' properties set to true. So, I believe that while nothing appears to be happening, the installer is actually removing the old version. The 'Progress' dialog does not appear until the new version begins installation.I've been trying to either:
a) Get the 'Progress' dialog to display immediately after the 'Install Icon' dialog disappears
b) Show another dialog while the Uninstall is running to let the user know that the setup is still running and everything is OK.
I have been unsuccessful with both methods. I'm using VS 2008 SP1?
Is there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
I often use the process of displaying a dialog from a form, with the dialog user input then used to update the main form without any problem. In a new scenerio I launch the main application screen, I then show a login dialog ontop of the main app screen and can launch another dialog from the login if a new user is required. The plan is to update the login dialog (updating a combobox to reflect the addition of a new user) from the new user dialog.
See code below :-
'Update login forms user list as new user added successfully frmRoomBookingLogin.cboLogin.DataSource = Nothing frmRoomBookingLogin.txtPassword.Text = "Updating password from dialog" MessageBox.Show("The password text is " & frmRoomBookingLogin.txtPassword.Text)
[code]....
The messagebox implies the dialog has been updated yet the text does not change. Is it possible to update the dialog when using a setup such as Form -> dialog -> dialog? I'm intrigued as why the dialog does not reflect changes. I have never refreshed/repainted the dialog as never required to in my other examples when updating a form from a dialog and never encountered a problem when using a two tier form setup.
I am using Visual Studio 2008 and created an ASP.NET 3.5 project and solution. I added another project to my solution, a class library. I added a reference to my class library. Now when I click on the properties of my class library, the Default Namespace is set to "HRCommon", which is correct. Now for some reason, from my ASP.NET application, it's automatically importing the HRCommon namespace. So when I want to reference a class out of my class library, I just need to type the classname. I want to have to specify the whole name, like HRCommon.<ClassName> instead of just <ClassName>.
VB has a feature that C# does not, imported namespaces at a project level (My Project>References>Imported Namespaces). When new people check projects out of source control none of our custom imports are included. Where is this VB specific Imported Namespaces stored?
I have a MS Access database file that I imported into my project as a data source. It's visible in my solution explorer.I have a DataGridView in my form whose data source is set to that imported access file.Right now I have con set to the actual file access database file, but when Iend queries, the changes are made to my actual access file, and not the data source within my project!Dim con as OleDbConnection = new OleDbConnection("***database.mdb")Within the above *** string it points to the databasefile located on my hard drive that I imported into my project. But when I send queries to my DataGridView it makes those changes on the file, not on the data source that I bound to the DGV.
I have an assignment due this week in which I have to make a app that has 5 buttons and a picture box. When each button is clicked it has to show the corresponding picture in the picture box, the fifth button closes the app.
I have the whole form set up the way it should be, but I have no idea how to write the code to make the buttons display the images and close the app.I have the images in a folder within the project folders.
I have yet to be able to find one, the one I found should how to do it using a file opener dialog and a folder browser dialog but that is not what I think my prof wants us to do, as that is more for a picture viewer app that lets the user choose the file of the image they want ot view.
All i want is for the buttons to be linked to specific photos that are part of the application itself and have them open.
Is there a way to launch a Modeless Dialog that stays active even when a Modal Dialog is launched? Can I put the Modeless Dialog in a seperate Thread or something like that?
Public Sub RandomNumbers() Dim s(4) As String Dim RandomNumber As Byte
I don't know if you can tell what I am trying to do here, so I will try to explain. I what to create for random numbers and place them into for different text boxes. I also would like to do this with combo boxes and their selected indexes. So if the combo box has 10 items in it; the new selected index would be the random number generated above.
I'm in the middle of creating an application that will be used to input customer information whilst the customer is speaking to someone over the phone. This involves the customer giving the employee information such as name, address, postcode etc and the employee inputting that information into text boxes and combo boxes that are in the application.
What I would like to be able to do is after the customers information is given over the phone, I need to be able to send that information to a database which will probably most likely be done by button click. In this case, I'm using Microsoft Access. I'm also hoping that I can do this within Visual Basic coding.
The database is set out with multiple tables which include a customer table and a ticket table and both have multiple fields such as first name, surname in the customers table. Both of these tables are in use with the information that the customer gives over the phone.
I've already asked on other forums and people are where replying giving me third party programs that I could use to implement this, something I don't really want to do.
I'm in the middle of creating an application that will be used to input customer information whilst the customer is speaking to someone over the phone. This involves the customer giving the employee information such as name, address, postcode etc and the employee inputting that information into text boxes and combo boxes that are in the application.
What I would like to be able to do is after the customers information is given over the phone, I need to be able to send that information to a database which will probably most likely be done by button click. In this case, I'm using Microsoft Access. I'm also hoping that I can do this within Visual Basic coding.The database is set out with multiple tables which include a customer table and a ticket table and both have multiple fields such as first name, surname in the customers table. Both of these tables are in use with the information that the customer gives over the phone.
Im trying to make a program that allows the user to view additional information via moving the cursor over the label to view (make visble) additional information, in the form of text boxes and/or picture boxes. How will i go about doing this?
I used this code to created 2 combo boxes General and Specific...and Only show Specific (Combo when Combo A is chosen.....What i need now is to know how to assign specific values to the items in combo b (Specific).??? If i chose a sode, Fanta, i want the total price to be $10.00 (this price will show up in the finial price box..