1. when testing a service, should I install the exe which is in the bin subfolder or the obj subfolder, and why?
2. when distributing the service, should I use the exe which is in the bin subfolder or the obj subfolder, and why?
i have a Windows service that is hosting a WCF service through net.tcp and this is working great. I have also created a WCF service application. I am trying to add the net.tcp service reference to the service application. Then I add it to the GAC that goes ok but if I try to RegAsm the WCF service application to allow it to be called from Server.CreateObject I get the error:
Warning: Type library exporter encountered a type that derives from a
generic class and is not marked as
[ClassInterface(ClassInterfaceType.None)]. Class interfaces cannot be
exposed for such types. Consider marking the type with
[ClassInterface(ClassInterfaceType.None)] and exposing an explicit
interface as the default interface to COM using the
ComDefaultInterface attribute.
It does not work. I have tried to call it through a class library but this does not work either as the end point is not set correctly.
I'm trying to write a simple load tester for one of our web services, which is served through IIS7. I'm launching a load of threads (as Tasks) that call the web service as a Web Reference.Despite the threads all starting, only 2 concurrent connections from the app can be handled by the web service. I'm aware that by specification simultaneous connections are limited to 2 per user. For the sake of this load tester, which I guess is one user, I would like to open many simultaneous connections.I have tried to add the following to the web.config of the web service.
<system.net>
<connectionManagement>
<add address="*" maxconnection="40"/>
</connectionManagement>
</system.net>
My setup is as follows:
The web service is located at [URL], where MyWebServiceApp is configured as an application.The webmethod can be viewed as something trivial that simply waits for, say, 20 seconds before returning a response (making it easy to see that only 2 connections are open at any one time).The simplest form of the load tester code is ass follows:
Imports System.Threading.Tasks
Module SuperBasicLoadTester
Sub Main()
[code]....
I've tried pointing other load testing software (e.g. soapUI) at the web service and have observed the same issue.
Edits: I should add that the web service box is running Windows 2008 R2.Also I have run SoapUI and my loadtester simultaneously and each is only able to request 2 connections each (i.e. 4 in total).
When i try to run my unit tests in vb.net, visual studio closes down because of an error.I don't know what is causing the problem but i is very frustrating.I have a project running for school that i can't continue because of this problem.When i had visual studio installed under windows vista i didn't got that problem. (same version of visual studio)
View 8 RepliesI am trying to communicate with a Windows service on a remote machine on the network but i keep getting an exception saying the following: "System.InvalidOperationException: Cannot open Service Control Manager on computer 'machine001'. This operation might require other priviledges. ---> System.ComponentModel.Win32Exception: Access is denied.
[Code]...
Is it possible to have a dotnet windows service which monitor other services and upon stop of any service, the monitoring service would be able to start the stopped service.
View 4 RepliesIn the past I had the indexing service installed on a Windows Server 2003 and used it to index files for my website. I did this by executing an OleDbCommand with a query and a connection string.How do I accomplish the same thing with the new "Windows Search Service" (Windows Server 2008) by using VB.NET? Does this work the same way so that I only need to change the Provider name which has been "MSIDXS.1" up to now? Case true, what is the new Provider name?
View 1 RepliesWhen you create a Windows Service, you create a list of the services you want to start. The default is this:
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service}
Can you have multiple instances of the same Service class (that bind to different addresses or ports), like this?
ServicesToRun = New System.ServiceProcess.ServiceBase() {New Service("Option1"), New Service("Option2")}
Or will that cause problems? Should we use two different classes instead?
I am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)
I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).
Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything.
I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit.I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit (If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I am retrofitting unit testing into a fairly complex system designed and written by other developers in VB.net. I am trying to develop unit tests for the GUI forms using NUnit and the NUnit Forms extension. (I've been looking at c# examples that are fairly easy to port over if you have a solution but don't know VB syntax as long as it uses NUnit classes)I will try and explain what I am doing but first a brief description of the program. It basically monitors server activity. You need to connect to a server via a modal form with IP and Port fields(amongst others). Once you have connected to a server other parts of the program unlock and become usable (such as configuration of the server).Desired process: Load program > click connect button > modal connect form loads > enter details > click OK to connect > main form updates to logged-in state > other functionality
The problem is that I cannot test the functionality of the connect form and then the logged-in functionality of the program. I can test that it loads the modal connect form correctly; enters the details and clicks OK (all fine so-far) but it does not appear to logically progress the program. The modal form just closes again seemingly without running the connect code from the program back-end and I'm back at the main menu not logged in to anything. I have a feeling that I've either missed something really obvious or that it's simply not doable in NUnit. I have trawled the internet in search of anything similar but the closest was another SO thread that was really generic. Without being able to actually test the logged-in version of the program, I'm at a major hurdle.Another issue is handling message boxes that don't have unique identifiers (e.g. "are you sure you want to exit?"); these also seem to be a major pain in the arse with NUnit(If it makes any difference, I'm running the tests as a stand-alone project using a reference to the executable file of the built project, not the actual source)
I'm looking into adding some unit tests for some classes in my data access layer and I'm looking at an update routine that has no return value.It simply updates a row based on the id you provide at whichever column name you provide.Inside of this method, we collect the parameters and pass them to a helper routine which calls the stored procedure to update the table.Is there a recommended approach for how to do unit testing in such a scenario?
View 4 RepliesI want a sure-shot method to test if the application was run via the UAC box and has full administrative rights. Earlier, I thought of making a folder in C:Windows for testing but running it on other computers proved to be a failure!
The UAC box provides all administrative rights to the computer to do anything(including making folders and creating files in places which needs there rights) and also makes sure that any child program so called or created also does have the same rights as the parent.Is there a sure-shot way to test if my application has been provided all the administrative rights that I can maximum get by the user while running the application or not? If yes, I would be glad to have to piece of code-work!
We have a server with multiple services written in .Net 1.1 and 3.5 running on a Win 2003 server. Everything runs fine, but when we stop a certain service, an unrelated service stops. I have checked and neither has any dependencies. The service we stop is in 3.5, and the unrelated service that incorrectly stops is in 1.1. We get no error messages, nor event log errors, so we are baffled.Does anyone have an idea as to what may be causing this?
View 7 RepliesI am using this method to install windows service
processInstaller = New ServiceProcessInstaller()
serviceInstaller1 = New ServiceInstaller()
serviceInstaller2 = New ServiceInstaller()[code].....
How can I get the account name after whenever the service is started ?
alguien habla español
View 3 RepliesI use VS team system 2008. At the moment i need to test some business classes, i have found two kinds testing NUnit and the unit testing provided by the VS team system. what are there differences?
View 1 RepliesI'm building an Active Directory wrapper in VBNET 2.0 (can't use later .NET) in which I have the following:
IUtilisateur
IGroupe
IUniteOrganisation
These interfaces are implemented in internal classes (Friend in VBNET), so that I want to implement a façade in order to instiate each of the interfaces with their internal classes. This will allow the architecture a better flexibility, etc.Now, I want to test these classes (Utilisateur, Groupe, UniteOrganisation) in a different project within the same solution. However, these classes are internal. I would like to be able to instantiate them without going through my façade, but only for these tests, nothing more.
[Code]...
I am using a windows service and tried to copy some file as below,System.IO.File.Copy("Z:abc.txt", "C:helloworld.txt")Note: Z: is a map drive from another host in 1 LAN (same LAN)I got error, "Could not find a part of the path 'Z:abc.txt'."But when I tried it at a simple application using windows application, it works with the same code as above.
View 8 RepliesTried to write my first Windoes Service yesterday with a certain degree of success but I couldnt install it.Upon running teh Install programme in the command line I was presented with a 'Set Service Login' window with a User ID, Password and Confirm Password text box.I attempted to use my windows login credentials but the install failed and was rolled back.Im using a computer on a company network with Win2k?
View 6 RepliesI've created a windows service and started a deployment project for it. I have the project installer class in the service project and I've added the "Standard output etc.." from the service project as custom actions for the Deployment Project. When I attempt to install it, I get the error "Specified service already exists", which shouldn't happen (even though the service does exist) because the installer should be removing the old service and installing the new one.
I've checked that the versions are different, and that the Product Code is also different, also RemovePreviousVersions is set to true. Can anyone tell me why it isn't uninstalling my old service when I update then install again? .S: MODS: DO NOT MARK MY POST AS ANSWERED, IT IS RUDE, YOU HAVE NO IDEA IF YOU'VE ANSWERED MY QUESTION!Sorry, it gets ignored in my signature.Mods
I have a .net Windows Service developed in VB.net. I have a settings file in the root directory called Connections.XML and I am setting the basedirectory [code]...
When I schedule the service this is working absolutely fine in my Windows XP machine. But when I installed the same service in our development server (Windows 2003 64 bit Server) for some reason it is not able to locate this file.
It is possible to create windows service using windows form control in vb.net. give me the url or links. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 1 RepliesI'm porting code that I wrote for use in a Windows Forms application to a Windows Service, but for some reason, the code that worked in the Windows Forms application is now throwing errors in the Service
View 7 RepliesIt is possible to create windows service using windows form control in vb.net.If yes then please give me the url or links.
View 1 RepliesI have developed a Windows Service in VB.Net (VS2010) which is running on Windows7. I am trying to get "MainWindowTitle" for processes thru their process object but it returns empty.
[Code]...
I'm writing a windows service (MacTimeFix.exe) to fix the Windows time on a Macintosh (it's like this: i live in Moscow (GMT+03:00), and Mac OS thinks that the system time is GMT+00:00 and adds 03:00 to it< and Windows thinks that system time is the local time).I need to execute my code when my VB app is closed. (it happens with the shutdown of Windows) The form is invisible (hidden), and the user mustn't click anything except windws shutdown button. It is a service. When i write a Form1_FormClosing sub, it works only on Alt+F4 or CloseButton and doesn't work when the app is stopped from Windows Task Manager or whatever also.I need a way to execute sub when app is closed with taskkill (without /force) or a way to execute a several app on Winshutdown.
Here is my code:
Public Class Form1
Dim SystemMary As String
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Me.Load
SystemMary = Mid(TimeString, 1, 2)
[code].....
It is possible to create windows service using windows form control in vb.net. The windows forms control such as, Timer control, list-box, notify-icon control etc.
View 2 RepliesI'm printing pdf files via the below code in a service. In Windows 7 this works really well, In Windows Vista, nothing happens at all? What am I doing wrong?
[Code]...
I am working on a .NET Windows Service where I am trying to store settings that will be used when the service is started and while it is running. I have searched through posts on SO and found that using the Settings in the properties of the project is great for use with console and winforms applications. However, Google and SO are silent when it pertains to storing these settings with a windows service.
View 4 RepliesIs there a way in which I could invoke a windows form from a particular windows service....??
Have created a windows service, installed it and everything is working fine... Now I want to design another windows form that I would call from the service while running it I know that with the help of ServiceController class we could interact with windows service from a windows application but am not sure of the other way round implementation....
