Toolbar Click Event Firing Twice When User Double Clicks Button?
Jul 12, 2010
I have a problem with a Save button on a toolbar firing the click event twice if the user double clicks the button as opposed to single clicking.Disabling the double click on the toolbar itself seems to make no difference as it is the actual save button that is being clicked twice.I have tried setting a Boolean to stop the event firing twice but it is just too quick!I didn't have this problem with my code before as the server call was not async... and reverting back is not really an option.
My code is as follows:
Protected Sub tlbOrdQuot_ButonClick(ByVal sender
ByVal e As System.Windows.Forms.ToolBarButtonClickEventArgs)
I have a vb.net application that uses Flash movies (AxShockwaveFlashObjects.AxShockwaveFlash). I have buttons in the flash movie. When they first start using the application, they can single click on the buttons in the flash movie and button responds accordingly. But after a while (and I haven't been able to pin-point an exact thing that changes it or my issue would be solved), the user has to double-click on the button in the flash movie for them to work.
I have a double click event for a notify icon that will bring up my main form. The double click event isnt firing. Even if I put a breakpoint in the code it never gets executed. Here is what I have so far:
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs) Handles Me.FormClosing Me.WindowState = FormWindowState.Minimized Me.Visible = False
Private Sub NotifyIcon1_MouseDoubleClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles NotifyIcon1.MouseDoubleClick Me.Visible = True
The excessive stuff is my way of trying eveything I can think of to get the form to show.
I have a notifyicon for an application. The double click event is not firing. When I put my code in by itself in its own application it works. But in my bigger app it doesnt. I dont know why. Here is what I have so far.
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs) Handles Me.FormClosing e.Cancel = True
I have a asp grid with a few columns that bind to data. The last column has been converted to a template-field. In this template-field is a button with a modal popup extender attached to it. Hidden inside this field is a modal popup. This modal popup is used to add a new account. it contains 2 text boxes, drop down lists and buttons("Add" and "Cancel"). When "add" is clicked the modal should close after the inserting of the new account in the code behind.
I add a button to a form each time the user clicks a menu option as:
This draws a small blue line at the bottom of the button to show it is highlighted. Just like the mouseoverbackcolor property on a button except this will draw the line. It works fine until you slide the mouse very fast between the buttons. It is as if the mouseleave event doesnt always fire.
I have a simple form that works fine with a button click and the code generated by VB for Button1_Click event.But I want to make the user have to double click the button, So I just modified to: [code]This compiles but nothing happens when you double click.What am I not doing to get this to work?The problem is that if you click the button and the form is the focus, then if you hit the enter key it fires the event (when you didnt want to)
I have a grid that displays data from a binding source. I have a method to handle the CellContentDoubleClick which will get the value of the cell and use that to do a new look up. This will generate a new datasource (with different columns) which I then rebind to the grid.
My grid double click works, but when it repaints with the new data, a single click fires the double click. I have no code in place to handle a single click .
The interesting thing is that it is (in my case) a toggle. If I double click, on the repaint, a single click fires the double click code. When it repaints again, I need a double click .
The double click code fires off a messagebox - if I tell it not to continue, then I have to double click to get it to fire again. So it is not dependant on what data is displayed.
I have a windows form that can search for data and the results are results are returned in a Datagridview. The Datagridview is bound to a custom datatable object. On the CellDoubleClick and CellContentDoubleClick events, a new form is supposed to open which will display the results of that row. What I am noticing is that the datagridview doesn't always fire when I immediately double-click on a particular row. It would appear that I have to first click on the row to "select" it, then double-click the row so the event will fire. Is there a way to remove this intermediate "select" step? Is there a property in the Datagridview that needs to be activated so the double-click events will fire right away? Does something possibly need to be done in another DatagridView event?
I believe there wont be any diff if user clicks the button on the form and the click event is fired OR if we call the button click event / function in the code. Because in one my project, this does make diff. If I click the button on the form, the App works great but same button if I click it thru the form code, the whole process crashes. This happens in Vista / VB.net.
how to get the DataGridView CellMouseDoubleClick to fire when a user double clicks on a DGV cell.I currently have both DGV.CellMouseClick & DGV.CellMouseDoubleClick implimented in my code.The DGV.CellMouseDoubleClick never fires and the DGV.CellMouseClick always fires. The only exception is when I position the cursor between DGV cells and get the double arrow. If I double click with the double arrow then I get the DGV.CellMouseDoubleClick to fire.I need to take different actions for users RT-Click, RT-Dbl-Click, LT-Click and LT-Dbl-Click.
I have a User Control. In this user control I have a Repeater. In this repeater I have again a User Control. If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired. Is there a way to catch this event?
first user control:
This event isn't firing:
Also the following does not work because it returns nothing:
i have a User Control.In this user control I have a Repeater.In this repeater I have again a User Control.If I try to catch the click event of an ImageButton in this user control, I'm gettin nothing because the event has not been fired.
I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?
I found that if you press F5 or refress from browser window, the last event fires again example, I have clicked on a button, the button event is carried out normally, but if I refresh the page by pressing F5 key the same event is fired again.
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.There's nothing special I'm doing to reference the elements:[code]....There's also an ordinary i have that doesn't fire either.
I have a masterpage in which I attached a content page. Now, I added a button which is running at server and placed a code, MsgBox("hi"), in its click event. I placed a breakpoint in its click event and played it to see if it's firing and it clearly did not.
Using VS 2005 I've created a project with some form on it. Each of the forms are fairly similar in structure and I have copied the contents of one form to another form etc. I have code the loads the data into the ListView on each form and that works fine but when I put a Click event on the ListView, it doesn't fire. I created a new project to do some testing and put some items in the ListView and the Click Event fires when I expect it. What am I overlooking? The code for the Form is included below: it loads the data fine and I can select a line in the ListView but as previously stated, the Click event just won't fire!
Private Sub frmViewRequests_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Try
If I add a WindowEvents_WindowActivated handler to my Visual Studio 2005 Macros EnvironmentEvents module, I get a weird side-effect: when I click from one window to another in Visual Studio, that click is treated as a double click.
I have a solution in Vb.NET 2008 windows Form with ToolStripMenuItems, but I need to implement menu navigation without any mouse intervention.I only found mouse events In ToolStripMenuItems, MenuStrip, etc.All MenuStrip and ToolStripMenuItems are created programatically, reading user permissions from Database, then add a handler to manage the events, but the client don't want mouse interaction, he wants only keyboard inputs only ![code]
I have 4 items in a ListBox and each item does a specific thing when it gets clicked on.But I also want the double click event to do the same thing as the click event.I can copy and paste all code from click event into double click event, but then you have lots of code crowding the code page doing the same thing. So what to do about this?
Example: Private Sub listBox1_DoubleClick(ByVal sender As Object, ByVal e As EventArgs) _ Handles listBox1.DoubleClick
I created a button control ,, by double clicking only the process was going on,,when iam single click the button nothing is to be happenend,,so i want to change into single click insted of double click........here my coding is given below.......
I have developed an asp.net website in VS2010. The defaultDocument is set to default.aspx in the root directory, as I have dome many times before.For reasons unknown an asp:button in default.aspx is not firing correctly when the url is typed in without the file extension. For example, if I type the url www.mywebsite.com the default.aspx page will load as expected, however, the button will not fire (it does postback but doesn't fire the server click event).If i type in the url www.mywebsite.com/default.aspx it works as expected.The problem I'm having only occurs in a live environment (I cannot recreate the error on the localhost).
I process single- and double-clicks on a listbox in VB .Net 2005; I use single-click to just select a particular entry and double-click to select and open the entry. I want to discard any other type of click, especially triple-clicks.
I'm trying to create Command Buttons dynamically, but clicking the button in question doesn't seem to raise the corresponding CommandButton_Click event. I noticed that in the examples on SO a property is set for Button.OnCommand as well as the CommandName and CommandArgument but it isn't an option in intellisense.(code below without the OnCommand), is it accessed in some other way - if so, why do the examples I've found all show it as .OnCommand?
EDIT: Further to help, I have added the handler however the event is still not firing. The buttons reside in an UpdatePanel and are rebuilt on every postback (along with the handler). I have created a simplified example of what I'm doing which is shown below If the button event fires, it writes "EVENT FIRED" to the txtTestFired Textbox - suffice to say I have never seen that.
I have a listview set up in Details View and I run a ascending/descending sort routine on the appropriate column when the user clicks one of the column headers.However, when I switch companies and reload the listview with new information, for some reason the event fires and I get an indexoutofrange exception as I believe that the information has not yet loaded when this fires.The e.Column property is set to that of the previous column which I clicked even though I have clicked nothing.