I have a grid that displays data from a binding source. I have a method to handle the CellContentDoubleClick which will get the value of the cell and use that to do a new look up. This will generate a new datasource (with different columns) which I then rebind to the grid.
My grid double click works, but when it repaints with the new data, a single click fires the double click. I have no code in place to handle a single click .
The interesting thing is that it is (in my case) a toggle. If I double click, on the repaint, a single click fires the double click code. When it repaints again, I need a double click .
The double click code fires off a messagebox - if I tell it not to continue, then I have to double click to get it to fire again. So it is not dependant on what data is displayed.
I have a grid that displays data from a binding source. I have a method to handle the CellContentDoubleClick which will get the value of the cell and use that to do a new look up. This will generate a new datasource (with different columns) which I then rebind to the grid.
My grid double click works, but when it repaints with the new data, a single click fires the double click. This happens whether or not thre is a single click handler.
The interesting thing is that it is (in my case) a toggle. If I double click, on the repaint, a single click fires the double click code. When it repaints again, I need a double click.
The double click code fires off a messagebox - if I tell it not to continue, then I have to double click to get it to fire again. So it is not dependant on what data is displayed.
When it is in the mode to respond to a single click, I can tab through all the controls and then click on any cell in the grid and it will still fire the double click.
No matter what I try to do (set focus to other controls, refresh the grid, etc.) nothing seems to reset the grid so it works consistently.
I have a situation where I am handling both single & double mouse click events on a form. In both cases something has to be loaded, however when a double click occurs, I do not wish to execute the code attached to the single click event.Is there a way to intercept the mouse click's and check if double or single and then execute the right event appropriately?
I created a button control ,, by double clicking only the process was going on,,when iam single click the button nothing is to be happenend,,so i want to change into single click insted of double click........here my coding is given below.......
how do we call double click on single mouse click event? Iam doing this and it's not working.
Private Sub RichTextBox1_MouseClick(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles RichTextBox1.MouseClick RichTextBox1_MouseDoubleClick(sender, e) End Sub
How to make a single click on mouse to double click, may the story like this :if i press left mouse button, that mean i press double click left mouse button..I'm using Vb.net but if the code for it only in another language like C++, C# or Js, no problem but if you want, please give me an example.I want to use that method for playing game house. That game make me always to double click mouse.
I have a double click event for a notify icon that will bring up my main form. The double click event isnt firing. Even if I put a breakpoint in the code it never gets executed. Here is what I have so far:
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs) Handles Me.FormClosing Me.WindowState = FormWindowState.Minimized Me.Visible = False
[code]....
Private Sub NotifyIcon1_MouseDoubleClick(ByVal sender As System.Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles NotifyIcon1.MouseDoubleClick Me.Visible = True
[code]....
The excessive stuff is my way of trying eveything I can think of to get the form to show.
I have a windows form that can search for data and the results are results are returned in a Datagridview. The Datagridview is bound to a custom datatable object. On the CellDoubleClick and CellContentDoubleClick events, a new form is supposed to open which will display the results of that row. What I am noticing is that the datagridview doesn't always fire when I immediately double-click on a particular row. It would appear that I have to first click on the row to "select" it, then double-click the row so the event will fire. Is there a way to remove this intermediate "select" step? Is there a property in the Datagridview that needs to be activated so the double-click events will fire right away? Does something possibly need to be done in another DatagridView event?
I have a notifyicon for an application. The double click event is not firing. When I put my code in by itself in its own application it works. But in my bigger app it doesnt. I dont know why. Here is what I have so far.
Private Sub Form1_FormClosing(ByVal sender As Object, ByVal e As FormClosingEventArgs) Handles Me.FormClosing e.Cancel = True
I have a problem with a Save button on a toolbar firing the click event twice if the user double clicks the button as opposed to single clicking.Disabling the double click on the toolbar itself seems to make no difference as it is the actual save button that is being clicked twice.I have tried setting a Boolean to stop the event firing twice but it is just too quick!I didn't have this problem with my code before as the server call was not async... and reverting back is not really an option.
My code is as follows:
Protected Sub tlbOrdQuot_ButonClick(ByVal sender As Object, ByVal e As System.Windows.Forms.ToolBarButtonClickEventArgs) Handles tlbOrdQuot.ButtonClick
I have a asp grid with a few columns that bind to data. The last column has been converted to a template-field. In this template-field is a button with a modal popup extender attached to it. Hidden inside this field is a modal popup. This modal popup is used to add a new account. it contains 2 text boxes, drop down lists and buttons("Add" and "Cancel"). When "add" is clicked the modal should close after the inserting of the new account in the code behind.
The Problem: I get the popup to display and load the Drop down lists from the cache, without problem. How do I get the button click event to fire in the code behind. I've tried using a JavaScript function that performs a _doPostBack('btnAddAcc','') but it keeps returning the error "JavaScript error: Object expected". I gathered after about 1 hour on Google that it is because "btnAddAcc' is not found because it is actually within the grid-view cell and can't be directly accessed. Using page methods and ajax calls is a last resort as the company has a strict policy against this and only allowes this after a bunch of paperwork.
I need advice on how to pass the details of a double clicked datagrid record to another form and display as text boxes etc. This will act as an edit form for the user once they have clicked their desired record.
i have a data grid,, connected in ms access via code, on its celldoubleclick event i have the code
Public Sub dgv1_CellDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles dgv1.CellDoubleClick Dim empid As Object = dgv1.Rows(e.RowIndex).Cells(0).Value
Private Sub DataGridView2_CellContentDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles DataGridView2.CellContentDoubleClick Dim doubleclick As String = "SELECT BibleBookNames.Book, Bible.VerseNum,Bible.Verse1 " & _
I'm having a problem with my DataGridView. When I double-click on any column, with exception to Date & Time, the grid advances by 1. As you can see the 2nd row is highlighted in blue, I actually double-clicked on the first one, under "Sent By." (See attached image)
Here is my code
VB.NET
Public Class frmPickAssignment Dim dteStart As Date Dim dteEnd As Date
I have a vb.net application that uses Flash movies (AxShockwaveFlashObjects.AxShockwaveFlash). I have buttons in the flash movie. When they first start using the application, they can single click on the buttons in the flash movie and button responds accordingly. But after a while (and I haven't been able to pin-point an exact thing that changes it or my issue would be solved), the user has to double-click on the button in the flash movie for them to work.
i want to disable double click to prevent WMP from change into full screen mode and i also want to disable right click to prevent WMP from showing option such as
I have a solution in Vb.NET 2008 windows Form with ToolStripMenuItems, but I need to implement menu navigation without any mouse intervention.I only found mouse events In ToolStripMenuItems, MenuStrip, etc.All MenuStrip and ToolStripMenuItems are created programatically, reading user permissions from Database, then add a handler to manage the events, but the client don't want mouse interaction, he wants only keyboard inputs only ![code]
I have a listview set up in Details View and I run a ascending/descending sort routine on the appropriate column when the user clicks one of the column headers.However, when I switch companies and reload the listview with new information, for some reason the event fires and I get an indexoutofrange exception as I believe that the information has not yet loaded when this fires.The e.Column property is set to that of the previous column which I clicked even though I have clicked nothing.
How would i make a ListView Do something when i double click it. And also how would i right click a listview and a menu comes down and the user selects what ever.how would do these in a listView?
I have UltraGrid and i need when i click on grid row to get content from specific column of that grid. For example if I click in cell of fourth column then i need to get value of first column of the same row where i clicked.
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.
There's nothing special I'm doing to reference the elements: <telerik:RadButton ID="RadButton1" runat="server" Text="RadButton"> </telerik:RadButton>
I have a user control on which the button click event stopped firing even if I add a new button. It can be noted I'm using Telerik RadControls: RadButton specifically.There's nothing special I'm doing to reference the elements:[code]....There's also an ordinary i have that doesn't fire either.
I have a masterpage in which I attached a content page. Now, I added a button which is running at server and placed a code, MsgBox("hi"), in its click event. I placed a breakpoint in its click event and played it to see if it's firing and it clearly did not.
Using VS 2005 I've created a project with some form on it. Each of the forms are fairly similar in structure and I have copied the contents of one form to another form etc. I have code the loads the data into the ListView on each form and that works fine but when I put a Click event on the ListView, it doesn't fire. I created a new project to do some testing and put some items in the ListView and the Click Event fires when I expect it. What am I overlooking? The code for the Form is included below: it loads the data fine and I can select a line in the ListView but as previously stated, the Click event just won't fire!
Private Sub frmViewRequests_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Try
