Trap Exceptions In Thread Pool Threads?
Jun 15, 2012
I have a thread pool that send file using ftp protocol. I encapsulated the call for threadpoll with try catch believing that the thrown exception inside the threadpool will be catch by the main thread. Instead the system terminate whenever i throw an exception from inside the threadpool. Also I design the Clsftp.ftpsend class to throw an exception related to ftp error. Basically my design for handling the error is just like the code below.
'Main thread
Private Sub BttnStartSending_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles BttnStartSending.Click
try
Dim objparam As New ThreadParameter
[code]....
View 7 Replies
ADVERTISEMENT
Sep 22, 2009
I've been reading up on multi-threading and just have a couple trivia questions that are ambiguous given my sources:
1) What is the max number of threads in the thread pool? The number 25 is used but I have on reference that says 25 per CPU and another that says 25 per core. I realize that both can be right but before I start making flagrant design decisions I'd like some validation.
2) Let's say I'm in the body of a delegate and I call a function or sub. Does that function/sub remain in the thread or does it revert to the parent thread? I'm guessing the former would be much easier to implement so that's probably what MS did but you just can never tell.
View 10 Replies
May 19, 2012
I have several threads in my WinForm and I am running them via Thread.Pool, what I need to know is that how can I run them sequentially.
example:
Thread1 => me.label1.text = "Thread1"
Thread2 => me.label2.text = "Thread2"
Thread3 => me.label3.text = "Thread3"
In my Form_Load event, I have a line as follows:
[Code]...
View 8 Replies
Apr 8, 2011
I have a SqlDataReader and I want to trap any exceptions with Try Catch Finally if the reader =cmd.ExecuteReader() statement fails. If this statement throws an exception do I need to close the reader? If so, where. Wherever I place the reader.close() statement I get an error that the reader has not been assigned a value yet.
View 2 Replies
Sep 2, 2010
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
View 4 Replies
Mar 8, 2009
I have a code that basically grab data from a file, split into array and use a FOR loop to input data into a different file. I want to use thread pool to create multiple threads to do a specific task. For example for the array() I want a thread to read the first item in a array and perform the task, a second thread reads the second item and perform the task, a third thread reads the third item and perform the task, etc. How would I add thread pool to something like:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim data As String
[code]....
View 1 Replies
May 24, 2012
I have about 1000 webrequest created. Each link will navigate to a website and download a picture to place into a picturebox.
The person will then type in what animal is in the picture into a textbox. Then the user will then hit the submit button to send the name of the animal back to the site.
I am going to implement the use of a thread pool to handle the threading portion of those requests.
What is the best method to get my webrequest into the thread pool (listbox, txt file,etc?) and then how can I setup my button to coordniate with the site that is coming out of the pool to the picture box?
My first thought is to create everything on the fly. The picturebox, the textbox, and the submit button, the webrequest to the site for the picture and back again for the result. Something tells me that I will be taking the long way around to get same result.
My second thought is to have a slew of pictureboxes, textboxes, and buttons already on my screen and then when they come out of the pool and into a thread they would assigned a picturebox, textbox, and button if the others are not busy.
View 4 Replies
May 29, 2012
I am going to implements a thread pool to run my application. All of my content is saved under a folder on my desktop.
Each of the files are in .txt format. How can I read each .txt from a given folder and then put the .txt file into the thread pool / thread queue?
View 1 Replies
May 25, 2012
I have about 1000 webrequest created. Each link will navigate to a website and download a picture to place into a picturebox.The person will then type in what animal is in the picture into a textbox. Then the user will then hit the submit button to send the name of the animal back to the site.I am going to implement the use of a thread pool to handle the threading portion of those requests.My question is this:What is the best method to get my webrequest into the thread pool (listbox, txt file,etc?) and then how can I setup my button to coordniate with the site that is coming out of the pool to the picture box?My first thought is to create everything on the fly. The picturebox, the textbox, and the submit button, the webrequest to the site for the picture and back again for the result. Something tells me that I will be taking the long way around to get same result.
View 2 Replies
May 29, 2012
I am going to implements a thread pool to run my application. All of my content is saved under a folder on my desktop.Each of the files are in .txt format. How can I read each .txt from a given folder and then put the .txt file into the thread pool / thread queue?
View 2 Replies
Mar 1, 2011
Im creating a service for a mobile platform and I need to process user messages on a different thread than they were created on to leave the threadpool open.Anyway my App will be using a MySQL database and when it gets a message it will add the message to Another thread pool. But in the sub that procceses the messages I will need to perform query's on the database. So i know i can use a global variable and it will be visible to all threads but is making database operations safe while using a thread pool with a global mysqlconnection?
View 2 Replies
Sep 2, 2009
I'm trying to use the thread pool to download more than one string at a time. But most of the tutorial on threading is in C# or C++ so my knowledge on thread pool is limited.
Here's what I got so far.
Imports System.Threading
Imports System.Net
Imports System.Text.RegularExpressions
[Code]....
I keep getting an error "Cross-thread operation not valid: Control 'Listbox1' accessed from a thread other than the thread it was created on." And it still seems to be downloading it one by one to me.
View 10 Replies
Feb 2, 2011
There is a problem with standard System.Timers.Timer behaviour. The timer raise Elapsed event with some interval. But when time of execution inside Elapsed event handler exceed timer interval then thread pool begin queuing event handling. This is a problem in my case. This is because with my Elapsed event handler I fetch some data from database and doing something with it and finally save results back to database. But data handling should be provided only once. So, is there a way to prevent from queuing elapse events for System.Timers.Timer.
As illustration for this issue you can consider next test program:
[code]...
2) Second way is about SynchronizingObject, but it is a valuable only for Windows form application or required additional development of code for implementing object that would be implements ISynchronizeInvoke interface. More about this way you can find here
View 4 Replies
Jan 25, 2010
so i have a Method that is going to made Thread Safe. can i have something like this in the Method:
Public Class Q Private Shared ASD As New MyException("") Public Sub W Throw ASD if multiple threads attempt to throw the Shared exception ASD, will there be an error in the catching part? The alternative of course is to: Throw New ASD but i'm just checking to see if the first way is thread safe
View 4 Replies
Dec 7, 2011
I have only managed to use an STA to run a long running excel process with a background worker and 2 delegates.
What I want to do now is have the whole application running outside of the main thread to make sure the UI is always available, I then want to create new threads from the thread I have outside of the main to run the various processes. I will need to have some form of syncronisation in there for certain things to be done once a thread is completed and also I will need to change the button states on the main form to stop certain process being called whilst other processes are running.
This is my code so far, basically this loads in a csv file to a datatable adding manager employee ID and email address, filters it and displays the resultant data in a listview. There eventually will be some filter options as well. There are then 2 options for processing the data, it will produce individual bradford factor reports and email them to each manager or will produce a summary spreadsheet that is sent to HR.
Currently because there are around 8000 lines of data, it was the summary option that required the background worker as a long running process time out error was occuring whilst in the main.
What it does is write the data from the list view to an excel sheet and colour co-ordinates the summary rows according to the absense policy. It then copied bottom to top, the summary value the next blank column against all the lines for that individual and then uses this column to decide which sheet to move the row to, copying the row to the new sheet then deleting it from the master list and shifting the cells up.
This works well, but the process of loading the data in to the list view locks up the main thread where it currently runs. I also wanted to make this slightly more complicate as far as threading is concerned, as more of a learning curve than a practical application of the function.
Here is my code so far: [URL]
View 10 Replies
Jan 3, 2010
Trouble finding 1 thread out of the 3568 threads I have in my history.In the one I'm looking for I wrote an Extension Method called Shape , I think.
The code could change the Shape of any Control and I think I added similar code for any FORM in the same thread but not for User Controls.
Does anyone remember roughly what year and month it was?
It might save me hunting through my past threads.
[Code]...
View 4 Replies
Dec 5, 2010
In my application I have a loop that makes calls to a website to download data. I'm using a DownloadDataAsynch call with a handler.
I'm making many such calls in a loop. What I'd like to do is, if I have more than a certain number of replies pending, I should pause the loop and let the data handlers run.
How do I do that?
CODE:
View 14 Replies
Sep 3, 2009
Does anyone have a 1 to n thread example in which n threads are created dynamically? There are a number of examples that show a definite number of threads, and some that imply n threads by using a tcp ip listener or a file system listener. However, I'm looking for a 1 to n created in response to a dynamic requirements, provided purely by and for my program.Essentially, my requirement is to be scalable. 1 to n threads based on application throughput should make this pretty easy to satisfy.
View 9 Replies
Dec 12, 2010
I'm working with vb.net 3.5SP1 /VS2008. I'm familiar with windows threads from C++ but I didn't do it since the 90s.I have 5 threadpool calls (ThreadPool.QueueUserWorkItem) that do some complex work (they read info from different web pages, regular expressions, etc) and each updates different columns in a data-grid view. They pause for 1 second between each web read with thread.sleep (not to overload the server). My issue is that some of the threads do not complete. I get for example 3 results when I should have 8. Sometimes it works fine. This is an older 3.0Ghz HT machine, I want to test it on the lowest common denominator(and that is all I have ). I tried using Monitor.Enter(ListView1)it seems to help but it is hard to tell. I tried using the thread debug window but it is not really helpful, it seems do disappear during execution. If I remove the threads I always get my data. I'm wondering if something is being blocked? Is there a way to debug this?
Also, does thread.sleep(x) stop all threads or just the thread that the statement is executed in?
View 4 Replies
Feb 15, 2010
I have need of either enumerating all the managed threads in a application or listen to when a new thread is created. I can not find anyway to do this through searching the web. It strikes me as odd the the IDE can list all the manage threads, but I can't.
If this is not possible, is there clarification as to why this is not possible.
I need to create a shared class in a DLL that will when it receives a signal will stop all the threads currently running, and gracefully exit the application.
View 3 Replies
Oct 15, 2009
What is the best way to pass objects between threads? I would like to create a new thread that creates a new object : Dim myobject as newobject = new newoject Then in my main thread, I would like to use myobject. Ideally I would like to just assign to a global variable but I don't think that is possible. I think I may have to use some form of delegate function (but I think the child thread would need to complete to use a callback). The new thread will not actually end before I need the object reference in the main thread. How should I go about this?
View 2 Replies
May 23, 2011
c# - Does queuing threads impact non-thread safe objects in the same class?
View 1 Replies
May 7, 2009
If I spawn a thread with ThreadPool.QueueUserWorkItem and that thread does not reference the object that is not thread safe, would it compromise that non-thread safe object? By not thread safe object, I mean a third party interface to a programmable logic controller that has no ability to open simultaneous connections or concurrency support.I suppose I just wanted to be sure that by queuing threads in the same class as my reference to that object, I wouldn't somehow be compromising its thread safeness in a way I didn't realize.
View 2 Replies
Apr 29, 2010
I just made a rapid file transfer form for my photos.In which I drag photos into a listview with my destination folder set.I assign each individual file transfer to a new thread. This works very fast as compared to the standard drag n' drop.
View 2 Replies
Dec 23, 2009
Say I have a code with 3 methods that do some pretty intensive work. Would executing these methods on 3 seperate threads be faster then executing them one after the other on a single core cpu? And what if it's a dual core or HT?
View 8 Replies
Dec 26, 2009
I've just skipped around a few inbuilt VB classes' methods which throws exception. of all that i've came across, methods may throw multiple exceptions but ALL of them are exclusive, meaning there is no way 2 exceptions will ever occur simultaneously, yea and i was trying to make my class throw 2 exceptions simultaneously, hence this question, must all exceptions be exclusive?
View 1 Replies
Oct 19, 2011
I just had a new, last-minute idea on to take on a task, so I am running to StackExchange for quick help.
What I want to do is execute a series of methods right in a row, each in their own threads. I want the application to wait until all of these threads are completed, after which the program will resume. It also has to use managed threading (thread pool).
What quick examples could you provide to help me along the way? If it's too complex, what things should I know about so that I can Google it on my own?
View 1 Replies
Dec 30, 2009
I have a main thread which is designed to be a batch processor - it spawns a series of 'child' threads from a loop (which can vary in terms of the no of items) - see below
[Code]...
However, each of the 'child' threads could take anywhere from milliseconds to about a minute to process - depending on the complexity of each calculation. There may also be a large number of child threads - e.g 100s. Creating large numbers of child threads is not efficient. I therefore want some way to effectively queue each child thread (and cancel if the process is taking too long to complete). Autoevents seems like one way of doing this, but the only examples I can find seem to assume there are two different processes on seperate threads, not one process being repeated.
View 4 Replies
Aug 13, 2010
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
View 3 Replies
Nov 3, 2011
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
View 4 Replies
