UI Thread And Secondary Thread Interaction?
Jul 20, 2010
With threading, the WebBrowser control behaves abnormally.While other controls allow accessing properties and error out when trying to set it, the WebBrowser control behaves just the opposite. It allows to set the property and errors out when trying to access it.
Here's a small test:
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim th As New Threading.Thread(AddressOf DoWork3)
th.IsBackground = True
th.Start()
[code]....
View 2 Replies
ADVERTISEMENT
Aug 13, 2010
In one application, I need use 4 simultaneous threads.When the threads finished, I need to update the text of a TextBox.So, I create 4 Textbox, and I wanna the threads change the text to FINISHED.Each thread change one distinct TB.I use this "example"
Dim Terminados As Integer = 0
Private Sub frmEnviarMensagem_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Timer1.Enabled = True
Timer1.Start()
[code]....
The problem is, I have an error in the red lines.The error is: INVALIDOPERATIONEXCEPTION "Cross-Thread operation not valid: Control tbPlaca1 Accessed from a thread other than the thread it was created on."I don't use cross threading. Each TB only was accessed for the correspondent thread, and for the "main program".
View 3 Replies
Nov 3, 2011
This is the error message I am getting:
"Cross-thread operation not valid: Control 'Panel1' accessed from a thread other than the thread it was created on." The reason I am getting this error is because I am opening up a new form and then calling these three things:
Panel1.Show()
Label1.Show()
Label2.Show()
why I get this error message because it doesn't occur normally if I open Form2 after closing Form1, it only occurs when I open Form2 after closing Form4.
View 4 Replies
Jul 21, 2009
I have done a program using vb2005 to display reading from my microcontroller bs2 board but have encountered some problems. My code are as follows.
Dim Stop_Rx As Boolean
Private Sub btnRead_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnRead.Click
SerialPort1.Open()
[code]....
I've encounter an error which is, (Cross-thread operation not valid: Control 'txt1' accessed from a thread other than the thread it was created on.)
View 7 Replies
Jun 21, 2012
When my client try to connect to server I'm getting this error : Cross-thread operation not valid: Control 'l_users' accessed from a thread other than the thread it was created on.
Private Sub _socketManager_onConnectionAccept(ByVal SocketID As String) Handles _socketManager.onConnectionAccept
l_Users.Items.Add(SocketID)
End Sub
View 3 Replies
Feb 17, 2012
Would anyone be able to help me here please. I'm fairly new to VB.net and threading so im just trying to figure out what is happening.When I debug this I am getting the error thread operation not valid: Control 'ProgressBar1' accessed from a thread other than the thread it was created on.
I'm a little lost as to why the error is occuring or how to fix it. I've had to put the progress bar in a separate thread otherwise the GUI crashes
[Code]...
View 2 Replies
Sep 2, 2010
My understanding is that thread.join will suspend the execution of code on the calling thread until the spawned thread finishes or is aborted...
With that in mind, I tried this:
For i = 1 to 50
threads = New Thread(AddressOf test)
threads.IsBackground = True
threads.SetApartmentState(ApartmentState.STA)
[CODE]...
However, the rest of the code runs when the loop finishes, not waiting for all the spawned threads to finish. Since the rest of the code needs the threads to finish (otherwise the rest will error).
View 4 Replies
Jun 6, 2010
I have written an application that loads a form - frmCad as well as AutoCad. It does this via a class which detects when AutoCad quits.
Friend Class CadApp Private WithEvents AppObject As AcadApplication... Private Sub AppObject_BeginQuit(ByRef Cancel As Boolean) Handles AppObject.BeginQuit RaiseEvent Quit() End SubEnd Class
My main class loads frmCad as well as CadApp.
Public Class Cad Private WithEvents frmCad As CadForm Private WithEvents app As CadApp... Public Sub ShowForm() If frmCad Is Nothing Then frmCad = New CadForm frmCad.Visible = True End Sub... Private Sub app_Quit() Handles app.Quit frmCad.Dispose() frmCad = Nothing .... End Sub
When I debug the program, it stops at frmCad.Dispose()The program continues to execute, but all the code after it fails to work.Looking more carefully I get an error message which contains:-Cross-thread operation not valid: Control 'Autocad' accessed from a thread other than the thread it was created on.
View 4 Replies
Feb 9, 2011
My error:Cross-thread operation not valid: Control 'label2' accessed from a thread other than the thread it was created on. I want to be able to give my Public RunBot() sub access to edit Labels, buttons, etc without an error.
[Code]...
View 8 Replies
Apr 1, 2010
I'm getting the 'System.InvalidOperationException' error on acccessing a thread from other than where it was created. My code is:
'Required by the Windows Form Designer
Public components As System.ComponentModel.IContainer ' changed from private
[code]....
View 3 Replies
Jun 6, 2009
My problem is Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on.
System.InvalidOperationException was unhandled
Message="Cross-thread operation not valid: Control 'statusHO' accessed from a thread other than the thread it was created on."
Source="System.Windows.Forms"
StackTrace:
[Code]...
i used it and it works fine then. but as it is mentioned its not a good practice to use it. So what should i do? is it ok if i use this as i am not able to use correct practice. Mine application is not for enterprise purpose. its just my class project, and it works fine even if i put application working in background. System works ok. I dont know how to correct this error.As i dont have that much knowlege of threads.
So please guide me how to fix this in correct way otherwise i am force to go for bad programming practice
Please refer to Windows Mobile Developer Center > Smart Device Development Forums > Windows Mobile Development > Appendtext not working for all my code details
View 1 Replies
Aug 4, 2009
Cross-thread operation not valid: Control 'lv1' accessed from a thread other than the thread it was created on.
Dim lvi As ListViewItem
For Each lvi In lv1.Items
[code]....
View 1 Replies
Feb 7, 2011
Ok i have a Form with the following
Private Sub frmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
txtNotepad.Text = LoadFile("notes.txt")
[code].....
View 12 Replies
Sep 18, 2009
When i run the program i am getting the following error in this line TextBox1.Text &= "File Created: " & FullPath & vbCrLf"Cross-thread operation not valid: Control 'TextBox1' accessed from a thread other than the thread it was created on."
View 13 Replies
Mar 4, 2009
I'm creating a Client Server application which involves theServer running some scripts in clients and getting back results in an automated way. In Server, other than Main thread, i have 2 worker threads, a) one monitoring response from clients and b) the other scheduling next available job to respective client which executes that job. The issue here is ,I want these worker threads to write the status of their work in the UI(which comes under Main Thread). Also i need to write things in worker thread in a Data table and Rich Text Box in Main thread. But, I can't do so, since it has been blocked to access one thread's function or property directly from others. Is there any work around to do this?
View 8 Replies
Nov 12, 2009
Preface: I know this is an unusual/improper way to do this. I can do this with a "real" ShowDialog(), background worker/thread, and so on. I am trying to do specifically what I describe here, even if it is ugly. If this is impossible for X reason, I have created a fancy progress dialog for some of our long running operations. I need to have this dialog shown on a new thread while having processing continue on the calling (UI in most cases) thread.
[Code]...
View 3 Replies
Sep 5, 2009
I need your help on the following. In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm"" with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""
I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.I am no familiar with treating that's why can you give me detail instruction how to overcome this annoying problem?
View 1 Replies
Nov 14, 2009
I am getting this exception: Cross-thread operation not valid: Control 'TextBoxOutput' accessed from a thread other than the thread it was created on. in a VB 2008 Windows Forms application that I havent specifically made multi-threaded. I have create a sub called Out() like this:
Private Sub Out(ByVal inString As String)
Me.TextBoxOutput.Text += (Me.TextBoxOutput.Text & inString & vbNewLine)
Me.TextBoxOutput.SelectionStart = Me.TextBoxOutput.Text.Length
Me.TextBoxOutput.ScrollToCaret()
End Sub
and I call it from various events to log messages I am getting from my pbx, which I use a third party open source dll to access. The interesting thing to me is that if I run the deployed application (ie, not in the VS IDE) I do not get any exceptions, it's only from within the IDE.if I add the line: Control.CheckForIllegalCrossThreadCalls = False to the form's constructor, the exceptions stop, but a) this seems like a hacky way to get around the issue and b) the application seems to hang sometimes when I have it set this way.
View 2 Replies
Sep 5, 2009
In debugging mode only the program is stopping to the following line "My.Forms.FormMain.HelpProviderMain.HelpNamespace = "Reports.chm""
with the following error ""An error occurred creating the form. See Exception.InnerException for details. The error is: Cross-thread operation not valid: Control 'FormSplash' accessed from a thread other than the thread it was created on.""I noticed that when I am putting NONE in SPLASH screen option in the properties of the project, there is no problem.
View 1 Replies
Mar 10, 2010
im getting this error and i cant figure it out.
Public Sub mlogin()
Invoke(chkb, New Object() {"disable"})
Invoke(d, New Object() {achidrtb, "", "="})
Invoke(d, New Object() {hiddenrtb2, "", "="})
[code]....
View 1 Replies
Aug 27, 2011
I am trying to call a method that started on a background thread on the UI thread calling BeginInvoke and passing in a delegate as follows:
Dispatcher.BeginInvoke(Function() UpdateApplicationDataUI())
to call this method:
Private Sub UpdateApplicationDataUI()
...
End Sub
However, I get an error in the call to BeginInvoke (the UpdateApplicationDataUI portion of the delegate is stating "Expression does not produce a value").
Me.Dispatcher.BeginInvoke(Function() New Action(AddressOf UpdateApplicationDataUI))
View 1 Replies
Jul 1, 2010
A BackgroundWorker thread can pass data to the primary thread. It does it via the RunWorkerCompleted and ProgressChanged events, which I believe run in the primary thread. I would like to encapsulate the BackgroundWorker control in a class so that I can instantiate it more than once. But I don't know how the BGW can then communicate with the primary thread. If the BGW control is within a class, it does not have access to the properties outside the class. In that case, how can the BGW pass data to the thread that instantiated it?
[Code]....
View 3 Replies
Apr 21, 2010
I'm getting the following error:"Current thread must be set to single thread apartment sta mode before ole calls can be made"
I am using Speech.Recognition.SpeechRecognizer and using it to open various dialog boxes. It works fine for the first few but on the third one when it calls the InitializeComponent in the Dialog's New, it throws the above error.
Anybody have any clue what causes this or how to fix it? The SpeechRecognizer seems to run on its own thread, so that seems to be at the root of the problem. If I open thedialog with a button click I don't get an error.
[Code]...
View 1 Replies
Jun 6, 2011
I am in a trouble with this error:"An attempt has been made to free an RCW that is in use. The RCW is in use on the active thread or another thread. Attempting to free an in-use RCW can cause corruption or data loss." I am not sure if the RCW-error is related to my problem but I was having this error last January 25. It appears when I am ending my application. I ignored it. The next morning when I resumed coding for my application, the changes I am making does not appear at run-time anymore. Whatever GUI changes I make in my application (at design time), it does not make any effect any longer when I am running the application. What is causing this? I am so afraid if I have to restart my application from the scratch. I have gone far.
View 1 Replies
Nov 25, 2011
I have am using a Twitter streaming class library, and would like to update a listbox when a new tweet is posted. I have it all set up to the point where a message box will show when a tweet comes in, but when I try to insert this tweet into a listbox I get this error: The calling thread cannot access this object because a different thread owns it. I don't know what I need to do in order to insert this tweet.
View 4 Replies
Oct 18, 2011
I have a small problem that I am sure is due mostly to my inexperience with threading. I have used simple entirely self-contained threads before, but not to a great extent. I understand the basic laws that surround them, such as how a thread cannot access another thread's member directly, and must use delegates.
[Code]...
View 1 Replies
Oct 11, 2011
As we know, one STA UI thread creats the controls only canbe accessed in the UI thread in Winform application. And we need to call control.invoke or begininvoke to run the code in the background thread.
Yes, below code in VB.Net , VS 2010 Winform project can throw the exception "Cross-thread operation not valid: Control 'Form1' accessed from a thread other than the thread it was created on."
[Code]...
View 9 Replies
Jul 26, 2010
I have a thread in an application which calls a sub routine Main(). The Main sub routine in turn call several sub routines/functions from with the same module,several different classes in the same application. Also some sub routines/functions call routines from a class library. Now say the routine/function in class library goes into a infinite loop and never returns. I would like my thread in the application to raise a event and display message to the users about the infinite loop. I am giving some sample code for the application.
Imports System.Threading
Module VMain
Public gbSuspend As Boolean
[CODE]...
View 7 Replies
Oct 31, 2010
My routine to check for updates is run as a separate process. Exiting the application is required to update, so a dialog asks the user, when an update is found, if they want to exit now. f they do, the code (from the update thread) calls Application.Exit().However, if the FormClosed event of any form that needs to be closed needs to access its controls, an invalid cross-thread operation is detected (which sounds pretty logical).
View 1 Replies
Apr 1, 2010
I am using vb.net 2005In my form load procedure I am starting a background thread.The thread is declared as public.
Public
threadMonitorWMI As System.Threading.Thread
And started in form_load
[code].....
View 2 Replies
