I am having trouble to retreive a Image Raw Data into a Property, I included the related function and the Property.
The error I got is:.ImageRawData = CByte(dr.Item("ImageRawData"))
Error Message:Value of type 'Byte' cannot be converted to '1-dimensional array of Byte'
Public Function SelectOneImage() As ImagingData
Dim adapter As New DataAdapter
Dim ds As New DataSet
[code]....
The problem that I am facing is that I want to call a shared DLL created by qt4. Now reading the result from the DLL file is working well and good. But the problem arised while passing arguments required by the function in the dll file.The argument (both string or int) is not passed properly. Suppose I pass an integer argument 8, but 1 is passed. Whatever is my input only 1 is passed.
View 2 RepliesAn exert from my config file looks liek this.
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<appSettings>
[Code].....
EDIT: I am able to pass in the string perfectly when using Visual Studio 2005. But when using VS 2003 and a loiwer .net framework it will not let me, unless I hard code it in.
Could something be enabled/disabled on one of these instances of VS? Or could this just be an error with the older versions of .net? I think I am using 1.1??(will have to check) in 2003.
This is a theoretical question, I've already got a solution to my problem that took me down a different path, but I think the question is still potentially interesting.Can I pass object properties as delegates in the same way I can with methods? For instance:
Let's say I've got a data reader loaded up with data, and each field's value needs to be passed into properties of differing types having been checked for DBNull. If attempting to get a single field, I might write something like:
if(!rdr["field1"].Equals(DBNull.Value)) myClass.Property1 = rdr["field1"];
But if I've got say 100 fields, that becomes unwieldy very quickly. There's a couple of ways that a call to do this might look nice:
myClass.Property = GetDefaultOrValue<string>(rdr["field1"]); //Which incidentally is the route I took
Which might also look nice as an extension method:
myClass.Property = rdr["field1"].GetDefaultOrValue<string>();
Or:
SetPropertyFromDbValue<string>(myClass.Property1, rdr["field1"]); //Which is the one that I'm interested in on this theoretical level
In the second instance, the property would need to be passed as a delegate in order to set it.
I'm fairly sure this is possible, but what I want to do is have a generic method where I can pass in an object along with a Expression that will tell the method which Property to use in it's logic.Essentially what I would like to code is something like:
Dim firstNameMapper as IColumnMapper = new ColumnMapper(of Author)(Function(x) x.FirstName)
Dim someAuthorObject as new Author()
fistNameMapper.Map("Richard", someAuthorObject)
Now the mapper object would know to set the FirstName property to "Richard".Now using a Function here won't work.
I have a Form class with a property defined as[code]...
View 4 RepliesI'm accessing a router using Webbrowser, to get some information from it.After logging into the main page, you click on a link which runs a script to display the info you want. I can do this OK in Firefox or Internet Explorer.In my VB program, having navigated successfully to the router's main page, I try to do this by using InvokeMember ("click") on the appropriate link element in the document and get this error in the script that runs:
"Unable to set the value of the property 'location': value is null or undefined".I don't know how to see the source code of this script, so any ideas on what the error may mean?When I hover over the link in Firefox, the status bar shows it as: javascript:MainFunction('./cgi-bin/v2x00.cgi?fid=168')
I'm setting up a simple helper class to hold some data from a file I'm parsing. The names of the properties match the names of values that I expect to find in the file. I'd like to add a method called AddPropertyValue to my class so that I can assign a value to a property without explicitly calling it by name.The method would look like this:
//C#
public void AddPropertyValue(string propertyName, string propertyValue) {
//code to assign the property value based on propertyName
}
'VB.NET'
[Code]...
Is this possible without having to test for each individual property name against the supplied propertyName?
I'm trying to pass some values to another page and I have the values in List (Of String). However, I'm getting an error (at design-time in the IDE) saying: There is no member "X" of System.Web.UI.Page. I was able to get the Property through Intellisense. So I'm not sure why I'm getting the error.
Here's the code:
[code]...
I am currently learning VB.net but for a project I need to create and array and pass it using a property. The data to be passed will be a train's destination, the time its due and the expected time of the train. I was wondering if someone could simplly explain how to first produce an array and then show how to pass it to a custom control
View 1 RepliesI`m looking for a way to parse a parameter name like linq does.I want to filter before i download the date from the database.With LINQ the data is already red into a dataset. I only want to select data from the database witch i need. how i can send a property name to a function without using the property name as string and without to use to mutch code inside the function and without creating an instance of the object, etc.
Module
Module1
Dim user
As user =
[code]....
If you pass the property of an object to a function ByRef, and the function doesn't modify the ByRef parameter, the property Set is still called.
[Code]...
I am trying to allow changes to our database through a timecard program. We use and Image database and I am using VS 2008. I am getting the error: (MDMDA) Unable to change property. The trouble shooting tip tell me "check the error code property of the exception to determine the HRESULT returned by the COM object." The error line is in bold.
If Not Trim(frmMantime.txtFunc1.Text) = "" And Not frmMantime.txtRec1.Text = "" Then
'Update Record
lngRecordNumber = frmMantime.txtRec1.Text
[Code].....
I have a Javascript function for my select box, but after I included runat="server" to it, the script debugger highlights on this line below:
' for (i = 0; i < sourceTo.options.length; i++) { ' and says:
SCRIPT5007: Unable to get value of the property 'length': object is null or undefined
I included it because I wanted to loop through it in code behind and perform some other stuffs?
Code:
<select multiple size="8" style="width: 135px" runat="server" id="outletFromBox">
<option value="JP">Jurong Point</option>
<option value="IMM">IMM</option>
[code]...
I am faced with the prospect of having to completely rewrite the application.I have suddenly started to get this error message all the time - it seemed to start after I added a table to the schema, but deleting the table makes no difference. I can't see anything wrong with the connection string, but as it seems to be entirely undocumented, that doesn't mean much.
The connection string contains DataSource=.SQLEXPRESS;AttachDbFilename=|DataDirectory| est.mdf;Integrated Security=True;User Instance=Trueand certainly the string works when I use "test connection" from the application setting edit box. I am assuming that for some reason it is not evaluating the Data Directory , but can't see any reason why it shouldn't. Any ideas gratefully received! What might be a clue though is that I can't get rid of the table I added. I have deleted it from the database, deleted it from designer and saved the file, but it just keeps reapearing! Even when it is not showing, there is still a
table adapter in the .xsd file. I am reluctant to start editing this manually because of the danger of screwing something else up - I did try but it caused an error somewhere else (VS helpfully didn't say where)
my error code is run-time error 1004 unable to get the correl property of the worksheetfunction class. I read the data from xlsx-files to one dimensional arrays in my vb - program. the essencial code parts are
Option Explicit
Option Base 1
Dim winvyf() As Double, winvx() As Double
[code]....
Does anyone know what the problem is with this error message? One or more errors encountered while loading the designer. The errors are listed below. Some errors can be fixed by rebuilding your project, while others may require code changes. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
View 2 RepliesI have three class files, accounts.vb and transactions.vb in addition to my form.vb. I am unable to retrieve a member variable from on class from inside the other. When the combobox index changes, the program loads the correct account (checking or saving) from two different sequential files. I don't think I have the calcBalance procedure in the correct class file. And that is what I am having trouble with. Accessing it to display it. [Code]
View 1 RepliesI'm having some very weird issues with interfaces right now.
I have a very simple setup. In one of my class, I have a Property implementing a Property from an Interface.
In my class it's like:
Private _oForm As IForm
Public Property Form As IForm Implements IContainer.Form
Set(value As IForm)
[Code]...
I have like dozens of interfaces like this working throughout my project and I can't believe this simple one can't work!
I have two tables:
table1
case_no flow result
tc_1 001 pass
tc_1 002 pass
tc_1 003 pass
tc_2 001 pass
tc_2 002 fail
tc_2 003 pass
table2"
case_no result
tc_1 pass
tc_2 fail
Table2 should be updates from table based on the results... If all results is PASS then the table2 should be updated as pass... if any result is FAIL then the entire case_no should be updates a s fail..
This code was working consistently, but now...This code works on the first pass.Then second pass it just hangs on Code:Dim tcpClient As TcpClient = tcpListener.AcceptTcpClient() for about 2 minutesThen the code will fork for another pass, then fail.....
Code:Imports SystemImports System.TextImports System.Collections.GenericImports System.XmlImports System.Xml.LinqImports System.Net.Sockets
[CODE]....
Just started VB programming this week and have found a wealth of information about what I'm trying to do. Problem is, some of it is more complete than others.Here's what I'm trying to do:In Form1 (my main form), I want to instantiate a class that contains a couple of properties (speed setpoint and position setpoint). When I click a button, I want to pass this data to Form2 and populate two textboxes on Form2 with the properties of this object. I want to manipulate the property values on Form2 and click an OK button which closes the dialog and returns the manipulated data, updating the property values of the object. Here's the algorithm I'm following:1) On Form1, instantiate the class2) On Form1's "Pass Data" button click event handler, instantiate a Form2 object and invoke the ShowDialog method, passing the object as a parameter.
3) On Form2, overload the ShowDialog method to accept the object as a parameter and modify the method so that it returns the manipulated class data.4) On Form2, in the ShowDialog method, populate the textboxes with the class data that was passed in.Here's where I get stuck. If I press the OK button on Form2 (DialogResult.OK), it returns me to Form1, but what hook do I have in Form1 to receive the manipulated class data that the ShowDialog method is returning?Here's an example of what I'm thinking about:
Code:
Public Class Form1
Dim clsController1 As New MotionController
[code].....
I'm sure it's probably a very elementary question, but every explanation I've found seems to be incomplete.
Is there a way for implementers of an interface where a ReadOnly property is defined to make it a complete Read/Write Property ?
Imagine I define an interface to provide a ReadOnly Property (i.e., just a getter for a given value) :
Interface SomeInterface
'the interface only say that implementers must provide a value for reading
ReadOnly Property PublicProperty As String
End Interface
This means implementers must commit to providing a value. But I would like a given implementer to also allow setting that value. In my head, this would mean providing the Property's setter as part of the implementation, doing something like this :
Public Property PublicProperty As String Implements SomeInterface.PublicProperty
Get
Return _myProperty
[code]....
I searched on the forum / Internet for the solution how a PropetryInfo object (of a Public property) can reveal if it has a Private Protected Setter ... it was all in vain .... all help I found was about how to "Set" value of a public property having a Private Setter.I would like to know if I have a PropertyInfo object of a public property, how would I know if its Setter is Non Public?
I tried, in a exception handling block, where I did a GetValue of the PropertyInfo object and then called SetValue by setting the same value back... but to my surprise it worked well and didn error out.
[Code]...
I'm having a few problems converting some code into VB.NET from C#. Most of the translating is done, but I am getting errors when I try to run my code, and I can't figure out what is causing them. Here is the Sub I translated.
Public Sub CreateWidget()
Dim blue As LCDColor
blue.Red = 0
blue.Green = 0
[code]....
The error I receive on this line ("vision.Widgets.CreateWidget(wg1)") reads "In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user."
start with I was given a program by a friend that was created in Excel 2003 with the help of Visual Basic Editor. He said he used Visual Basic 2003, which he is not 100% sure about. Anyways he used CurLine in the program and when I try to open it in Excel 2007 and then open the Visual Basic Editor and run the program I get the following error:Run-time error '-2147418113 (8000ffff)':Could not get the CurLine property. Unexpected call to method or property access.
View 2 RepliesI have a very simple class that holds a few public properties - ID, Text, Colour, etc. and a Boolean called 'SelectedItem'. Just like the Checked property on RadioButtons, only one item can have its SelectedItem property set to True within a particular group. Note: there will be several separate groups (lists), each allowed to have only one item with SelectedItem = True.
My first thought was that I would probably just have to handle everything outside of the class, setting SelectedItem to False for every other item in a particular list when another item was selected. But that seems rather inelegant to me. So I've been trying to think of how this might be done within the class. For example: could I perhaps have a private string property called say "GroupName" - set in the New sub when adding a new instance of the class - and then use a private shared method to set every item's SelectedItem property to False, provided the item has the same GroupName as the newly selected item? I would have a go at doing this but I have no idea how to enumerate every instance of a class from within that class, or whether that's even possible. Is it? Or is there another (better) way to achieve my goal? Here is a cut-down version of what I've got so far:
Public Class ResourceItem
Public ID As Integer
Public Text As String[code]....
As can be seen: instead of instantiating a new ResourceItem and passing that as an argument to the manager's Add procedure, I'm simply passing the details of the new item and the procedure is creating the item from those. I don't know whether this is a good or bad idea - please advise - but I've done it because I couldn't figure out how to make the SelectedItem property only writeable by the manager, so I wanted to avoid having directly accessible objects that could have their SelectedItem property set to True without it deselecting all the other items in the same group. Of course that still leaves the possibility of setting a variable to one of the manager's list items and setting it from there, so I would still like to know how I could prevent that, if possible.
UPDATE: I didn't use the code above in the end, deciding instead to go with Cyborgx37's solution - which seems to work perfectly well for me despite the warnings about best practice. I also realised I would need to use the same class in another scenario where multiple items could be selected, so it was easy to add a Boolean property to the manager to enable that.
Using the following code I get Identifier expected and Property access must assign property or use its value errors:
ViewState["SomeKeyValue"]
What is wrong with this code?
I have a dataview an i would like to show the count property in a text box.
i tryied the following
me.textbox1.DataBindings.add(new DataBindind("Text",DataView,"Count"))
But i have a exception.
I have a listbox binded to a list of objects. For each list item I wanted to have a rectangle whose fill color is determined by a few properties of the binded object. So I did the following:
Made sure INotifyPropertyChanged was implemented on my object.Created a class to expose the properties I am interested in as attached properties.Binded the properties of the object to the attached properties of the rectangle Created a style that uses triggers to set the rectangle fill based on attached properties.
This works, but only the first time the property of the object changes. After that, the attached properties do not seem to be receiving notification when the data object's property changes. I have double checked and my data object is raising the INotifyPropertyChanged event.
<Rectangle Style="{StaticResource RecordStateRectangleStyle}"
Width="10" Height="10" Stroke="Black"
local:RecordAttachment.RecordState="{Binding Path=RecordState}"
local:RecordAttachment.IsDeleted="{Binding Path=IsDeleted}" />
[code]....