Update Requires A Valid UpdateCommand When Passed DataRow Collection With Modified Rows?
Nov 11, 2005I get an error when I try to edit a cell that already containts data. What am I missing? be as explicit as I am very new at this.
[Code]...
ADVERTISEMENT
Update Requires A Valid UpdateCommand When Passed DataRow Collection With Modified Rows
Jul 27, 2007I have looked at multiple posts regarding this issue, but can't seem to find a solution. To keep it simple I have an Access database with a single table. It does have a field as a primary key. When I click the save icon on the Binding Navigator I get this error having to do with the following code:
Me.Validate()
Me.TitlesBindingSource.EndEdit()
Me.TitlesTableAdapter.Update(Me.VFCurvesDataSet.Titles)
I cannot set the Refresh the Data Table check box in Advanced Options of the TableAdapter Configuration Wizard as it is grayed out. Once again, I have a primary key.
The posts I have reviewed indicate that an UpdateCommand needs to be created, but I can't understand how it should be done. W
DTABASE NOT UPDATING - Error (update Requires A Valid Update Command When Passed Datarow Collection With Modified Rows)
Sep 28, 2009I have an issue with a data base updating it won't update for me in debgging mode it is stopping here on this bit of code which is highlighted in red. the error which comes up is .(update requires a valid update command when passed datarow collection with modified rows.)
Public Sub UpdateDataSource(ByVal ChangedRows As database.dataset1)
Try
'The data source only needs to be updated if there are changes pending.
If (Not (ChangedRows) Is Nothing) Then
[CODE]...
Update Requires A Valid UpdateCommand When Passed DataRow Collection?
Jun 1, 2011I'm trying to save the edits I'm doing to a dataset by using the tableadapter.update command and get this error when I attempt to do so:
Update requires a valid UpdateCommand when passed DataRow collection with modified rows.Whats the correct syntax for doing this? I have this as the update command in my
Private Sub SaveExceptionButton(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles saveexceptionsButton.Click
Try
Me.Validate()
Me.Scratchpad3BindingSource.EndEdit()
[code]....
Data Not Updating Error "Update Requires A Valid Update Command When Passed DataRow Collection With Modified Rows"
May 29, 2009I am completly flummoxed!!! I have writen code for updating my table from a form but when I use the same code only changing the table names it wont work I get the following message: "Update requires a valid Update Command when passed DataRow collection with modified rows" My codes are as follows:
[Code]...
Update Requires A Valid InsertCommand When Passed DataRow Collection With New Rows
May 2, 2009Here is my code.....This code works fine but when I click on add button (Which is used to update record) the following exception/error comes
View 6 RepliesUpdate Requires A Valid InsertCommand When Passed DataRow Collection With New Rows?
Oct 18, 2011I'm still pretty new at .Net and database coding, and am working on a small program that is generating an error and I'm not sure how to resolve it.[code]The following statement is giving me the error below: m_DA.Update(m_DataTable)"Update requires a valid InsertCommand when passed DataRow collection with new Rows".I know the answer is going to be very simple, but I'm at a loss. I would greatly appreciate it if someone could point out the flaw in my code and how to correct it. And yes, I have done fairly extensive searching on this error, but none of them give any idea how to fix it, they just hint around at what's wrong.
View 9 RepliesInvalidOperationException : Update Requires A Valid InsertCommand When Passed DataRow Collection With New Rows?
Jan 8, 2010This was working on the last test, now it's throwing an InvalidOperationException saying Update requires a valid InsertCommand when passed DataRow collection with new rows. No change in this
Dim NewRowB as DataRow=dsBatch.Tables("Batch").NewRow
dsBatch.Tables("Batch").Rows.Add(NewRowB
daBatch.Update(dsBatch,"Batch")
What *has* changed is that I'm trying to fix the same error that's occurring on a different dataset in a different form. This should add a blank record to the dataset, then update the database. The blank fields allow nulls. The reason for this (and there may be another way to do this-I'm helping a novice fix up his code and, since this has been working, I haven't yet really looked at it) is to obtain the correct value for an identity field. We've found that when the row is added to the dataset, if it doesn't currently contain any rows, the identity value is set to zero-but when the database is updated, it gets a different value (because previously inserted rows have been deleted). So we update the database then retrieve the correct identity value before continuing.As I said, this was working fine-until I started working on the same problem occurring in a different dataset. So why would that affect this dataset?
Update Requires A Valid DeleteCommand When Passed DataRow Collection With Deleted Rows?
May 7, 2010I created VB.Net Win Form application in Visual Studio 2008 SP1 that connected to Microsoft SQL Server 2008.The DataGridView was used to connect the SQL Server 2008 and WinForms.When I delete or add records, run into error: Update requires a valid DeleteCommand when passed DataRow collection with deleted rows.
View 3 RepliesVS 2008 Error "Update Requires A Valid DeleteCommand When Passed DataRow Collection With Deleted Rows" In Deleting Data
Apr 12, 2011I have a basic Table and I can add and save data, but when I try to delete, I het this error:
[Code]....
Insert Statement Error.. "Update Requires A Valid UpdateCommand When Passed DataRow "?
Feb 17, 2009when the program is already save the data and when the process is on updating the dataset it give me error say's"Update requires a valid UpdateCommand when passed DataRow collection with modified rows."The error occur at the line in bold letter in the codes below..
Dim classgroup As String
classgroup = ""
If Me.ClassComboBox.Text = "Key Project" Then
[code].....
Error 'update Requires A Valid Insert Command When Passed Data Row Collection With New Rows'
Jun 15, 2011When ever I try to update a record from data grid using a dataAdapter record it always showing ' update requires a valid insert command when passed data row collection with new rows' From specific sql server Table only. Resulting me holding up a project.
View 4 RepliesDataRow Collection - Update Requires Valid Delete Command?
May 1, 2010I'm going through a book which is teaching me some basic coding principles of the language. The current section is detailing how to set up a master child form using two tables linked with a foreign key. The master table is displayed as a number of text boxes, and below is a grid with the child table which shows related records to whatever master record you happen to be checking out. At the top of the screen are the default navigation controls that are added with the grid. The master table is named Person and the child table Book. They are linked using a foreign key and have cascade set up on them.
The book informed me of the code required under the save icon on the navigation control so that when it is clicked both tables will be updated as required. It is as follows:
If Validate() Then
'Make sure editing has completed on both master and child tables
Me.BookBindingSource.EndEdit()
Me.PersonBindingSource.EndEdit()
[Code] .....
I have double checked that the code matches that shown, so this should in theory work fine. But if I manually delete a record from the Book (child table) grid and then click the Save icon on the navigation bar it comes up with the error "Update Requires A Valid DeleteCommand when passed DataRow collection with deleted rows".
Why changes made are not permanently saved to the database? I gather that it's using a "copy" of the data in the database but how do I get the code/form to make changes to the actual underlying database records as well as just the copy? I find this system very unusual, if someone deletes a record in the application why would anyone want this to be just done temporarily?
Update Requires Valid UpdateCommand?
May 10, 2011Update requires valid UpdateCommand passed DataRow collection modified rows. When I run the following code. But the strange thing is that I have similar code on another form and it works great. The only difference is the database table is different. I verified both tables and they look identical, as far as settings. I have verified that _Non_MS_Office_Licenses has a primary key that is unique. Looking in dataset manager I see the query for fillBy() is fine and it has all the insert and update stuff. At the end when it verifies it says all is verified when I configure the dataset
Dim row = FrmApp.Non_MS_Office_LicensesBindingSource.Current
row("Primary User") = Replace(CStr(TxtUserid.Text), "'", "`")
row("Staff Last Name") = Replace(CStr(TxtLastName.Text), "'", "`")
row("Staff First Name") = Replace(CStr(TxtFirstName.Text), "'", "`")
[Code]...
Update Requires A Valid Delete Command?
Nov 14, 2011sqlDA_FrmOTUnit_Delete_Select_Venue_Period_UnitName.Fill(SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName")
Me.BindingContext(Me.SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName").RemoveAt(0)
Me.sqlDA_FrmOTUnit_Delete_Select_Venue_Period_UnitName.Update(SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName")
the row gets delete in the dataset when i put RemoveAt(0). But when i want to refelect in the database, it gives me the error: "Update requires a valid DeleteCommand when passed DataRow collection with deleted rows."
Primary Key Issue!!!! Hell such a litttle mistake mannn... toooook so much time and so irritating...
VS 2008 - Update Requires A Valid InsertCommand
Jun 30, 2009I'm trying to get a database to add a new row on this form. The user types a word into a text box, clicks save, and it should update the database. The table is called "text" for now, it's an Access DB, and it has two rows: ID, and userText. [Code]
I get the error at the da.Update line when I click Save. The full error is "Update requires a valid InsertCommand when passed DataRow collection with new rows." I'm not sure if I have to add an INSERT command somehow or if something in the code needs changing. If I add this line to the Save routine, I get an "Syntax error in INSERT INTO command": Dim cb As New OleDb.OleDbCommandBuilder(da)
I don't know if I should leave that out or keep it in since both give me errors.
DataRow Not Updating After SQLDataAdapter Execute UpdateCommand
Jan 6, 2012I am trying to check for concurrency when updating a record in the database. Here is my current VB.NET code and Stored Procedure code to do the update.
When a user changes a Status column value the DataGridView CellValidating event is fired and in that event it try's to update the record in the database using the stored procedure. The update works, but my SqlDataAdapter doesn't update dtmUpdateDatetime in dtResults. My UpdateDatabase function uses dtmUpdateDatetime to check for concurrency.
Public Class frmCalculatedResults
Private dtCriteria As New DataTable
Private bs As New BindingSource
[Code]....
C# - Edit List Collection : Error Note Collection Was Modified - Enumeration Operation May Not Execute?
Sep 7, 2011I have the following classes:
Product, Service and OrderItem
Product and Service must inherit OrderItem. So basically I want to store OrderItem object in my shopping cart and these object are store in a list.
Public MustInherit Class OrderItem
Private m_enuItemType As TypeOfItem = TypeOfItem.None
Private m_strUserID As Integer[code].....
Collection Was Modified Enumeration Operation
Dec 23, 2011I get that error any time my form closes(Me.Close), even if I don't do anything to the form at all exept load another form like this: Form2.Show Me.Close().
View 8 RepliesCollection Modified - Enumeration Operation May Not Execute
Aug 4, 2011We have some third party code that is causing some misery at the moment due to throwing the above error: it is slightly odd because it is an intermittent error. Here is the method that is causing the issue:
Private Shared Sub IntLocateDictionaries(ByVal haystack As ExpDictionary,
ByVal needlearray() As Object, _
ByVal resultarray() As Object, ByVal removemarks As Boolean)
Dim i As Integer
Dim item As Object
[Code] .....
I understand that this error is usually caused by trying to modify a collection whilst enumerating around it, hence why I've added logging on the only line that looks like might alter the collection... Since adding the logging we have still experienced the issue but NO LOGGING appears: this isn't surprising since if you look at the parameters on the calling line (the only place this Sub is called from) - removemarks is passed as False - this will be passed all the way down through the recursive calls and so that line which calls .Remove never gets executed....the fact we don't see logging proves this....
Collection Was Modified Enumeration Operation May Not Execute
Feb 17, 2012I am working on a project where I have a personnel class. The records stored in the class are populated a few records per second. At the time I am inserting the records, I have to check the same class to ensure the same record is not added twice. Since I am looping through the class using "For Each", I get a message "Collection was modified; enumeration operation may not execute".
View 5 RepliesCollection Was Modified; Enumeration Operation May Not Execute?
Mar 11, 2009i'm getting the following error: "COLLECTION WAS MODIFIED; ENUMERATION OPERATION MAY NOT EXECUTE."
The stack trace is ;
at System.Collections.SortedList.SortedListEnumerator.MoveNext()
at SatcomDiscoverySocket.clsGatewaySend.SendViaGatewaySend() in C:Documents and Settingsjim.SATCOM_DOMAINMy DocumentsVisual Studio 2005ProjectsSatcom Discovery Socket ServerSatcomDiscoverySocketSatcomDiscoverySocketThread PollingclsGatewaySend.vb:line 60
The line in question is but I don't believe that to be true I think its the line above it;GatewaySendEntry = Nothing The code is below. I can't figure out why, it's causing the error at that line and how to fix it.
[Code]...
Data Management Program - JIT Collection Was Modified
Dec 21, 2011I'm have a data management program. I've fixed everything in it, except when I run my Insert or update commands on a different computer I've installed it on, JIT tells me that the collection has be modified, it then gives me the option to continue or quit. I know it's been modified, the user knows it's been modified, how do I get rid of that?
View 10 RepliesItems Collection Cannot Be Modified When DataSource Property Is Set
Apr 27, 2010I am trying to refresh my combobox when an item is selected and added the highlighted code as shown below; [code]Items collection cannot be modified when the DataSource property is set.
View 3 RepliesTest If A Collection Of DataRow() HasChanges
Apr 12, 2012I use the Select method on my typed dataset to return an Array of DataRows.' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]................
Is there a way to test if any of the DataRows in the Array have changes? I already know about DataSet.HasChanges method, but in my procedure I want to run some code on the DataRow() Array only if one of the rows have changes. In my example below I get a subset of DataRows from my DataSet. If only one DataRow in the DataSet has been modified my For Each...Loop will run 10 times.
For i As Integer = 0 To 10 ' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]...................
if rows where added to or deleted from the dataset then the DisplayIndexes need to be reassigned
If Me.ds.HasChanges Then
[CODE]........
I only want it to run 1 time. For example,
For i As Integer = 0 To 10 ' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]............
Dataadapter, Update, Updatecommand Dataset Stuff?
Jan 25, 2007I'm having trouble updating a sql server database with a dataset using a dataadapter. I have used the dataadapter with success in the past when adding new rows, using a single table, and just calling the dataadapter.update command.However, I am now running into a more complex scenario and I need to use dataadapter.UpdateCommand method and I'm having lots of problems.
The sql statement that I'm using to fill the dataset looks like this: "Select [Order Details].ProductID, [Order Details].UnitPrice, [Order Details].Quantity, [Order Details].Discount, Products.ProductName From [Order Details] INNER JOIN Products ON [Order Details].ProductID = Products.ProductID Where OrderID='" & strOrderID & "'", sqlConn"
This is pulling the data from 2 different tables (Order Details and Products) and then joining them and filling the dataset, and I am seeing the exact results I want. I am then binding the dataset to a datagrid control that allows the user the option to edit the datagrid, which in turn updates the dataset.
So that being said how do I get the updated dataset back into the database? I tried using dataadapter.update but it informed me that I now need to use dataadapter.UpdateCommand. Ok, so I've looked up how to use UpdateCommand but I cannot for the life of me figure out how to set up the right sql command statement. Part of what has me confused is the UpdateCommand examples I have seen are working with a specific row and updating that rows data. I can get that to work but I want all changes to the dataset to persist and update to the database when the user is done working on the datagrid.
Also, the examples shown set up command parameters but again, this is only confusing me because I just want to send the whole dataset back to the database. It seems like the parameters are saying "Ok, this specific row in this specific dataset.table, update these specific fields in this specific database". I'm not sure how to accomplish that when working with a datagrid.
DataRow Update - Does Not Update The Access Database And No Error
Jun 26, 2009What is wrong with this code. It does not update the access database and no error.
Dim conn As New OleDbConnection
Dim sqlQRY As String = "SELECT * FROM StdMaster WHERE StuNo = " & txtStudentNo.Text & " ORDER BY StuNo"
[CODE]...
"Items Collection Cannot Be Modified When The DataSource Property Is Set?
Jun 17, 2010I have a combobobox on my form, and I use the following code to populate the data from SQL Server:
cbname.DataSource = DSAssetName.Tables(0)
cbname.DisplayMember = "IDWLNAME"
cbname.ValueMember = "FIDWID"
[code].....
Error - Collection Was Modified; Enumeration Operation May Not Execute
Oct 15, 2009I have this flood-fill algorithm, based on a queue (I tried the recursive method but pictures are too big and it was causing stack overflow).The problem is that when it makes the second pass in the for-each loop, the program crashes and compiler gives me the message "Collection was modified; enumeration operation may not execute.".Well, of course I know the collection was modified (it supposed to be!) since I am adding necessary items to it on-the-fly within the loop. What I cannot understand is why it happens since the for-each is based on the remaining items in the collection and not in a numeric index.
Below, the actual code:
Code:
Public Sub FloodFill(ByVal myx As Integer, ByVal myy As Integer)
Dim icoord As coordinate
Dim ocoord As coordinate
[code]....
VS 2008 Items Collection Cannot Be Modified When The DataSource Property Is Set
Feb 13, 2010I have two tables "Person" and "Alias" in a one to many relationship. I have a DGV for "Person" and want to use a combobox for the Aliases. I also have a textbox and a button for the user to type the alias name and click the button to add the alias name to the combobox and update the dataset. I keep getting the "Items collection cannot be modified when the DataSource property is set." Error. But if i use a DGV instead of a combobox for aliases, I have no errors and everything works fine. If I remove the datasource property for the combobox it will not get populated with the data already entered, so how, or can I, set it up where the combobox gets populated when the form loads and able to add items to the combobox????
View 1 Replies