Update Requires A Valid UpdateCommand When Passed DataRow Collection With Modified Rows
Jul 27, 2007
I have looked at multiple posts regarding this issue, but can't seem to find a solution. To keep it simple I have an Access database with a single table. It does have a field as a primary key. When I click the save icon on the Binding Navigator I get this error having to do with the following code:
Me.Validate()
Me.TitlesBindingSource.EndEdit()
Me.TitlesTableAdapter.Update(Me.VFCurvesDataSet.Titles)
I cannot set the Refresh the Data Table check box in Advanced Options of the TableAdapter Configuration Wizard as it is grayed out. Once again, I have a primary key.
The posts I have reviewed indicate that an UpdateCommand needs to be created, but I can't understand how it should be done. W
View 13 Replies
ADVERTISEMENT
Nov 11, 2005
I get an error when I try to edit a cell that already containts data. What am I missing? be as explicit as I am very new at this.
[Code]...
View 3 Replies
Sep 28, 2009
I have an issue with a data base updating it won't update for me in debgging mode it is stopping here on this bit of code which is highlighted in red. the error which comes up is .(update requires a valid update command when passed datarow collection with modified rows.)
Public Sub UpdateDataSource(ByVal ChangedRows As database.dataset1)
Try
'The data source only needs to be updated if there are changes pending.
If (Not (ChangedRows) Is Nothing) Then
[CODE]...
View 1 Replies
Jun 1, 2011
I'm trying to save the edits I'm doing to a dataset by using the tableadapter.update command and get this error when I attempt to do so:
Update requires a valid UpdateCommand when passed DataRow collection with modified rows.Whats the correct syntax for doing this? I have this as the update command in my
Private Sub SaveExceptionButton(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles saveexceptionsButton.Click
Try
Me.Validate()
Me.Scratchpad3BindingSource.EndEdit()
[code]....
View 8 Replies
May 29, 2009
I am completly flummoxed!!! I have writen code for updating my table from a form but when I use the same code only changing the table names it wont work I get the following message: "Update requires a valid Update Command when passed DataRow collection with modified rows" My codes are as follows:
[Code]...
View 5 Replies
May 2, 2009
Here is my code.....This code works fine but when I click on add button (Which is used to update record) the following exception/error comes
View 6 Replies
Oct 18, 2011
I'm still pretty new at .Net and database coding, and am working on a small program that is generating an error and I'm not sure how to resolve it.[code]The following statement is giving me the error below: m_DA.Update(m_DataTable)"Update requires a valid InsertCommand when passed DataRow collection with new Rows".I know the answer is going to be very simple, but I'm at a loss. I would greatly appreciate it if someone could point out the flaw in my code and how to correct it. And yes, I have done fairly extensive searching on this error, but none of them give any idea how to fix it, they just hint around at what's wrong.
View 9 Replies
Jan 8, 2010
This was working on the last test, now it's throwing an InvalidOperationException saying Update requires a valid InsertCommand when passed DataRow collection with new rows. No change in this
Dim NewRowB as DataRow=dsBatch.Tables("Batch").NewRow
dsBatch.Tables("Batch").Rows.Add(NewRowB
daBatch.Update(dsBatch,"Batch")
What *has* changed is that I'm trying to fix the same error that's occurring on a different dataset in a different form. This should add a blank record to the dataset, then update the database. The blank fields allow nulls. The reason for this (and there may be another way to do this-I'm helping a novice fix up his code and, since this has been working, I haven't yet really looked at it) is to obtain the correct value for an identity field. We've found that when the row is added to the dataset, if it doesn't currently contain any rows, the identity value is set to zero-but when the database is updated, it gets a different value (because previously inserted rows have been deleted). So we update the database then retrieve the correct identity value before continuing.As I said, this was working fine-until I started working on the same problem occurring in a different dataset. So why would that affect this dataset?
View 5 Replies
May 7, 2010
I created VB.Net Win Form application in Visual Studio 2008 SP1 that connected to Microsoft SQL Server 2008.The DataGridView was used to connect the SQL Server 2008 and WinForms.When I delete or add records, run into error: Update requires a valid DeleteCommand when passed DataRow collection with deleted rows.
View 3 Replies
Apr 12, 2011
I have a basic Table and I can add and save data, but when I try to delete, I het this error:
[Code]....
View 2 Replies
Feb 17, 2009
when the program is already save the data and when the process is on updating the dataset it give me error say's"Update requires a valid UpdateCommand when passed DataRow collection with modified rows."The error occur at the line in bold letter in the codes below..
Dim classgroup As String
classgroup = ""
If Me.ClassComboBox.Text = "Key Project" Then
[code].....
View 4 Replies
Jun 15, 2011
When ever I try to update a record from data grid using a dataAdapter record it always showing ' update requires a valid insert command when passed data row collection with new rows' From specific sql server Table only. Resulting me holding up a project.
View 4 Replies
May 1, 2010
I'm going through a book which is teaching me some basic coding principles of the language. The current section is detailing how to set up a master child form using two tables linked with a foreign key. The master table is displayed as a number of text boxes, and below is a grid with the child table which shows related records to whatever master record you happen to be checking out. At the top of the screen are the default navigation controls that are added with the grid. The master table is named Person and the child table Book. They are linked using a foreign key and have cascade set up on them.
The book informed me of the code required under the save icon on the navigation control so that when it is clicked both tables will be updated as required. It is as follows:
If Validate() Then
'Make sure editing has completed on both master and child tables
Me.BookBindingSource.EndEdit()
Me.PersonBindingSource.EndEdit()
[Code] .....
I have double checked that the code matches that shown, so this should in theory work fine. But if I manually delete a record from the Book (child table) grid and then click the Save icon on the navigation bar it comes up with the error "Update Requires A Valid DeleteCommand when passed DataRow collection with deleted rows".
Why changes made are not permanently saved to the database? I gather that it's using a "copy" of the data in the database but how do I get the code/form to make changes to the actual underlying database records as well as just the copy? I find this system very unusual, if someone deletes a record in the application why would anyone want this to be just done temporarily?
View 2 Replies
May 10, 2011
Update requires valid UpdateCommand passed DataRow collection modified rows. When I run the following code. But the strange thing is that I have similar code on another form and it works great. The only difference is the database table is different. I verified both tables and they look identical, as far as settings. I have verified that _Non_MS_Office_Licenses has a primary key that is unique. Looking in dataset manager I see the query for fillBy() is fine and it has all the insert and update stuff. At the end when it verifies it says all is verified when I configure the dataset
Dim row = FrmApp.Non_MS_Office_LicensesBindingSource.Current
row("Primary User") = Replace(CStr(TxtUserid.Text), "'", "`")
row("Staff Last Name") = Replace(CStr(TxtLastName.Text), "'", "`")
row("Staff First Name") = Replace(CStr(TxtFirstName.Text), "'", "`")
[Code]...
View 3 Replies
Nov 14, 2011
sqlDA_FrmOTUnit_Delete_Select_Venue_Period_UnitName.Fill(SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName")
Me.BindingContext(Me.SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName").RemoveAt(0)
Me.sqlDA_FrmOTUnit_Delete_Select_Venue_Period_UnitName.Update(SqlDS_FrmOTUnit_Delete_Select_Venue_Period_UnitName1, "OA_FrmOTUnit_Delete_Select_Venue_Period_UnitName")
the row gets delete in the dataset when i put RemoveAt(0). But when i want to refelect in the database, it gives me the error: "Update requires a valid DeleteCommand when passed DataRow collection with deleted rows."
Primary Key Issue!!!! Hell such a litttle mistake mannn... toooook so much time and so irritating...
View 1 Replies
Jun 30, 2009
I'm trying to get a database to add a new row on this form. The user types a word into a text box, clicks save, and it should update the database. The table is called "text" for now, it's an Access DB, and it has two rows: ID, and userText. [Code]
I get the error at the da.Update line when I click Save. The full error is "Update requires a valid InsertCommand when passed DataRow collection with new rows." I'm not sure if I have to add an INSERT command somehow or if something in the code needs changing. If I add this line to the Save routine, I get an "Syntax error in INSERT INTO command": Dim cb As New OleDb.OleDbCommandBuilder(da)
I don't know if I should leave that out or keep it in since both give me errors.
View 21 Replies
Jan 6, 2012
I am trying to check for concurrency when updating a record in the database. Here is my current VB.NET code and Stored Procedure code to do the update.
When a user changes a Status column value the DataGridView CellValidating event is fired and in that event it try's to update the record in the database using the stored procedure. The update works, but my SqlDataAdapter doesn't update dtmUpdateDatetime in dtResults. My UpdateDatabase function uses dtmUpdateDatetime to check for concurrency.
Public Class frmCalculatedResults
Private dtCriteria As New DataTable
Private bs As New BindingSource
[Code]....
View 9 Replies
Sep 7, 2011
I have the following classes:
Product, Service and OrderItem
Product and Service must inherit OrderItem. So basically I want to store OrderItem object in my shopping cart and these object are store in a list.
Public MustInherit Class OrderItem
Private m_enuItemType As TypeOfItem = TypeOfItem.None
Private m_strUserID As Integer[code].....
View 1 Replies
Dec 23, 2011
I get that error any time my form closes(Me.Close), even if I don't do anything to the form at all exept load another form like this: Form2.Show Me.Close().
View 8 Replies
Aug 4, 2011
We have some third party code that is causing some misery at the moment due to throwing the above error: it is slightly odd because it is an intermittent error. Here is the method that is causing the issue:
Private Shared Sub IntLocateDictionaries(ByVal haystack As ExpDictionary,
ByVal needlearray() As Object, _
ByVal resultarray() As Object, ByVal removemarks As Boolean)
Dim i As Integer
Dim item As Object
[Code] .....
I understand that this error is usually caused by trying to modify a collection whilst enumerating around it, hence why I've added logging on the only line that looks like might alter the collection... Since adding the logging we have still experienced the issue but NO LOGGING appears: this isn't surprising since if you look at the parameters on the calling line (the only place this Sub is called from) - removemarks is passed as False - this will be passed all the way down through the recursive calls and so that line which calls .Remove never gets executed....the fact we don't see logging proves this....
View 2 Replies
Feb 17, 2012
I am working on a project where I have a personnel class. The records stored in the class are populated a few records per second. At the time I am inserting the records, I have to check the same class to ensure the same record is not added twice. Since I am looping through the class using "For Each", I get a message "Collection was modified; enumeration operation may not execute".
View 5 Replies
Mar 11, 2009
i'm getting the following error: "COLLECTION WAS MODIFIED; ENUMERATION OPERATION MAY NOT EXECUTE."
The stack trace is ;
at System.Collections.SortedList.SortedListEnumerator.MoveNext()
at SatcomDiscoverySocket.clsGatewaySend.SendViaGatewaySend() in C:Documents and Settingsjim.SATCOM_DOMAINMy DocumentsVisual Studio 2005ProjectsSatcom Discovery Socket ServerSatcomDiscoverySocketSatcomDiscoverySocketThread PollingclsGatewaySend.vb:line 60
The line in question is but I don't believe that to be true I think its the line above it;GatewaySendEntry = Nothing The code is below. I can't figure out why, it's causing the error at that line and how to fix it.
[Code]...
View 17 Replies
Dec 21, 2011
I'm have a data management program. I've fixed everything in it, except when I run my Insert or update commands on a different computer I've installed it on, JIT tells me that the collection has be modified, it then gives me the option to continue or quit. I know it's been modified, the user knows it's been modified, how do I get rid of that?
View 10 Replies
Apr 27, 2010
I am trying to refresh my combobox when an item is selected and added the highlighted code as shown below; [code]Items collection cannot be modified when the DataSource property is set.
View 3 Replies
Apr 12, 2012
I use the Select method on my typed dataset to return an Array of DataRows.' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]................
Is there a way to test if any of the DataRows in the Array have changes? I already know about DataSet.HasChanges method, but in my procedure I want to run some code on the DataRow() Array only if one of the rows have changes. In my example below I get a subset of DataRows from my DataSet. If only one DataRow in the DataSet has been modified my For Each...Loop will run 10 times.
For i As Integer = 0 To 10 ' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]...................
if rows where added to or deleted from the dataset then the DisplayIndexes need to be reassigned
If Me.ds.HasChanges Then
[CODE]........
I only want it to run 1 time. For example,
For i As Integer = 0 To 10 ' get settings for the DataGridView from the dataset and be sure to sort the returned rows by the display index
[CODE]............
View 7 Replies
Jan 25, 2007
I'm having trouble updating a sql server database with a dataset using a dataadapter. I have used the dataadapter with success in the past when adding new rows, using a single table, and just calling the dataadapter.update command.However, I am now running into a more complex scenario and I need to use dataadapter.UpdateCommand method and I'm having lots of problems.
The sql statement that I'm using to fill the dataset looks like this: "Select [Order Details].ProductID, [Order Details].UnitPrice, [Order Details].Quantity, [Order Details].Discount, Products.ProductName From [Order Details] INNER JOIN Products ON [Order Details].ProductID = Products.ProductID Where OrderID='" & strOrderID & "'", sqlConn"
This is pulling the data from 2 different tables (Order Details and Products) and then joining them and filling the dataset, and I am seeing the exact results I want. I am then binding the dataset to a datagrid control that allows the user the option to edit the datagrid, which in turn updates the dataset.
So that being said how do I get the updated dataset back into the database? I tried using dataadapter.update but it informed me that I now need to use dataadapter.UpdateCommand. Ok, so I've looked up how to use UpdateCommand but I cannot for the life of me figure out how to set up the right sql command statement. Part of what has me confused is the UpdateCommand examples I have seen are working with a specific row and updating that rows data. I can get that to work but I want all changes to the dataset to persist and update to the database when the user is done working on the datagrid.
Also, the examples shown set up command parameters but again, this is only confusing me because I just want to send the whole dataset back to the database. It seems like the parameters are saying "Ok, this specific row in this specific dataset.table, update these specific fields in this specific database". I'm not sure how to accomplish that when working with a datagrid.
View 11 Replies
Jun 26, 2009
What is wrong with this code. It does not update the access database and no error.
Dim conn As New OleDbConnection
Dim sqlQRY As String = "SELECT * FROM StdMaster WHERE StuNo = " & txtStudentNo.Text & " ORDER BY StuNo"
[CODE]...
View 10 Replies
Jun 17, 2010
I have a combobobox on my form, and I use the following code to populate the data from SQL Server:
cbname.DataSource = DSAssetName.Tables(0)
cbname.DisplayMember = "IDWLNAME"
cbname.ValueMember = "FIDWID"
[code].....
View 2 Replies
Oct 15, 2009
I have this flood-fill algorithm, based on a queue (I tried the recursive method but pictures are too big and it was causing stack overflow).The problem is that when it makes the second pass in the for-each loop, the program crashes and compiler gives me the message "Collection was modified; enumeration operation may not execute.".Well, of course I know the collection was modified (it supposed to be!) since I am adding necessary items to it on-the-fly within the loop. What I cannot understand is why it happens since the for-each is based on the remaining items in the collection and not in a numeric index.
Below, the actual code:
Code:
Public Sub FloodFill(ByVal myx As Integer, ByVal myy As Integer)
Dim icoord As coordinate
Dim ocoord As coordinate
[code]....
View 2 Replies
Feb 13, 2010
I have two tables "Person" and "Alias" in a one to many relationship. I have a DGV for "Person" and want to use a combobox for the Aliases. I also have a textbox and a button for the user to type the alias name and click the button to add the alias name to the combobox and update the dataset. I keep getting the "Items collection cannot be modified when the DataSource property is set." Error. But if i use a DGV instead of a combobox for aliases, I have no errors and everything works fine. If I remove the datasource property for the combobox it will not get populated with the data already entered, so how, or can I, set it up where the combobox gets populated when the form loads and able to add items to the combobox????
View 1 Replies
