I need to update a table when my application closes. This is with the user name of the person exiting the app.
This works fine when the user closes the form from the main menu exit button where I have written code to update the table. However if a user exits from another form the main form is not closed (as I thought it would be) and the code that updates the table consequently does not run.
I have tried entering on other forms under the FormClosing event but this does not seem to run if they click the X in the corner of the form.
How can I get that code to run when a user exits in some other way.
Iīm new here, so excuse me if this is the wrong area. I've already read about this in this forum, but it didnīt kill my doubts. I have an form, called AddInstrPadr, wich is created by the MdiParent:
Is there anyway to update a new location and keep it once the app closes? Right now I have the default location hard coded in textboxes but I'd like to be able to update these locations when needed without having to re-compile everything. I've tried searching but I must not be wording it correctly... all I get are how to open files using openfiledialog or filebrowserdialog.
I have a small problem with sockets (I'm new to sockets). Below is the code I'm using. The problem is that when the client closes, the server closes aswell. How do I stop it from doing that?
I've been looking around the internet and I haven't really found any solution to my problem. Is there a way to perform a function when a user closes the form either by pressing the X button in the top right hand corner? I am using a database that saves what form the user is currently looking at, and when the application is closed I want to say "offline."
I created an app and what it does is takes a screenshot of your desktop, saves it, then uploads it to ftp. After that it closes. What i need it to do is continuously do that via what ever the interval is set to. So if the timer1 interval is at 12000 then i need to to take a screenshot and upload it every 12 seconds. Can someone tell me why is keeps closing after it uploads the 1st screenshot? [code]...
I have a problem here I hope someone can help me out. I have this application in which I show information about workplans. It has a Main Form which show the general information and the activites that are going to take place during the execution.
The application has the ability to "attach" documents to the activities. I have created another form (and MDI form) that I use to show the documents (pdfs) when a user clicks on one of the documents attached. The problem is that when I close the form that shows the documents, it ends the application and I don't know why. It should just close and leave me again with the Main Form. Can someone tell me why is this form terminating the app. Is it because is MDI or what?
I want to retain a value in a variable even after the application closes so the next time i open the application i can get that value.It's actually an integer value, i want to count the no. of times the application has been opened. I tried using static [b] but it doesnt work.
I've made a Windows Forms Application that runs fine. It has some buttons that open child forms, which can simply close again without any problem. As I need the form to be in a dll, I changed the application type to a class library and added an extra project containing an exe-file that only references the main form in the dll and shows it. So far so good...
The main form is basically a tabcontrol with a bunch of controls, buttons among others. Five buttons on different tabs use the same handler to open a child form. When I click the button on the first tab everything works fine. The form opens and when it closes, only the child closes. When I click any of the buttons on the other tabs, the child form opens and when it closes again, both the child and the main form close...
I am stumped, especially since all buttons use the same code to open the child form and everything appears to be completely identical, yet the results are not. Below I have pasted the code that opens the main and child forms. I am undoubtedly not looking in the right place, but I also have no idea where to look anymore, let alone what to look for...
The code opening the main form: Public Sub StartProgram() 'Load the form and show it Dim frmProgram As frmMain = New frmMain
I ran out of ideas and couldn't find any reference about it so here I go... I need to keep a secondary application wich is not related to my c# project always running in background. So if this secondary application crashes or someone else close it manually it will automatically re launch again via my c# app.
I have no clue of how to accomplish this one, I mean checking if this application closes by something external to my c# app.
Is there an easy way to disable all form validation when the user clicks on the "X" icon to close an application or when the user clicks on a button in the application that closes the application?[url]...
I have a parent form and a few subforms. When the user clicks the red X to close the form I have a dialog box open that asks the user if he wants to exit the application. I have a issue when the user clicks no the application closes anyway. I am wondering what I am doing wrong. [Code]
I have this code to edit the datarow of my table adapter but t doesnt update the table. I think i have a missing code that's why but i cant figured it out. by the way im using vb2008 and SQL as my database. [code]
I have a project which contains a large number of lookup tables, and I have all of these lookup tables represented in a single typed DataSet, which contains TableAdapters for each lookup. I've designed an editor for these lookup tables, which should allow editing of one of these at a time. My front-end is written in VB and WinForms, the back-end is a SOAP web service; I can successfully pass the changes to the DataSet back to the web service, but can't find a way to use a TableAdapter to update the single table that has been changed.
What I'm trying to do is instantiate the appropriate TableAdapter for the updated DataTable by sending the name of the table back to the web service along with the DataSet, then referring to the TableAdapter with a dynamic name. The normal way to instantiate a TableAdapter is this:
Dim ta As New dsLookupsTableAdapters.tlkpMyTableTableAdapter
What I'd like to do is this, but of course it doesn't work:
strTableName = "tlkpMyTable" Dim ta As New dsLookupsTableAdapters(strTableName & "TableAdapter")
Is there any way to achieve this, or am I taking the wrong approach altogether? My other alternative is to write separate code for each table, which I'd prefer to avoid!
An unhandled exception of type 'System.InvalidOperationException' occurred in system.windows.forms.dllerror in line: dbAdp.Update(dbDset) in btnSave_Click, (elseif editflag = true) blockdescription: Update unable to find TableMapping['Table'] or DataTable 'Table'I was also wondering if I could simply use the ExecuteNonQuery for the delete statement, but since I've placed my data in a datarow, I'm not sure if i can actually use it. Any thoughts on this? Btw, this is my first time using a datarow, and I've recently been studying how to use ADO.net.
dr = dbDset.Tables(0).Rows(CurIndex) dr.Delete() dbAdp.Update(dbDset.Tables("addresses"))
How can I update local dataset with mysql database without making duplicates. Assuming I set some column in mysql as primary key, which has unique string.
adapter.fill will just add duplicates, but adapter.clear before that is not an option.
So I want to update if the key column is the same with mysql data and if there is option for ignore adding new row.
I am having two tables with a similar structure. I want a code to select data from one table and update the same in second table and then delete the records in the first table.
I need to Update Access Database Table with Data from a Different Table. Not all the rows of original Table to be Updated will be affected. How do you loop through the 2 Tables to do the required Update.
The Table to be updated is called "RecordList" and Table with new Data is called "RecListReport".Every attempt I've made won't work. I tried to Use 2 Datagridviews but couldn't get it to work right.
NewTestConn() Dim Testconn2 As New OleDbConnection(NewTestConn1) Dim da As New OleDbDataAdapter
I have a form with comboboxes, if the user doesnt select a value in the box I want a null to be sent to the database. The insert works fine, i look at the record in the db and see the null. The update doesnt work. gives me a n "Update statement conflicted with foreign key constaint....."
Public Sub Update() TableAdapterCreate().Update(ID1, ID2, CType(cbox1.SelectedValue, Integer), CType(cbox2.SelectedValue, Integer), CType(cbox3.SelectedValue, Integer), CType(cbox4.SelectedValue, Integer),
[CODE]...
As I step through the selected value of the cbox 5 is shown as nothing (which it should be because the user didnt select a value for this combobox). I assume this needs to be a null instead of nothing to get written to the database. the combox boxes need to match a primary key in another table so sending a 0 would also result in the forieign key error since the related table does not have a 0 ID field.
am having a query regarding updating a table A records from table b on a button click...have created connection sting and commandtext to exexute d query am tryn ds query bt it seems to throw some syntax error
cmd.CommandText = "UPDATE stockno_table SET(product_id,Sold,Rec_No) =(SELECT product_id,Sold,Rec_No from stockno_temp_copy where stockno_temp_copy.stock_no=stockno_table.stock_no) where(exists)(stockno_table.stock_no=stockno_temp_copy.stock_no)"
basically the fields are same bt the stockno_temp_copy is a temporary table which i want to empty always while it updates all the table records to stockno_table...all the records except the Sold which is YES/NO field changes...NB: Access DB is used?
when trying to use the update command for my table adapter, i get the following error.
[Code]...
i've used the same commands several times and even tried copying the code from another project and importing that table and still get the same error. am i missing a namespace or class or something?
i am using visual studio 2005 and database sql server 2000. i want to read table of database and readed data insert in temporary table again update that inserted record.
I cant update my table i have below the following code :the error occured on the line with red font. it says like syntax error on MYSQL where [apdata].[tblemployee]
Dim dapEmpM As New OleDb.OleDbDataAdapter Dim tblEmpM As New DataTable Dim tblEmpMCRow As DataRow
in my every form i use update button to update values in a raw,
Now my query is that:- for doing so right now i have two option
1) UPDATE Table1 SET Column1 = Value1, Column2 = Value2 WHERE Some_Column = Some_Value but in this if i have many colom it will be a long process as in some table i have more than 50 coloms.
so i found a second option which is, first delete the row and then again insert the values but in this case it changes its row no which in some case not good for my project.
so i want to know is there any way to update * . or is there any short way to update similar to delete and insert.
I can pull 3 tables data into my program and read from all of them, I can update all 3 datasets but when it comes to updating the actual database i can only send the updates from the last dataset. Imports System.Data Dim con As New OleDb.OleDbConnection Dim ds As New DataSet Dim da As OleDb.OleDbDataAdapter Dim sql As String Public Sub OpenAllTables() [Code] .....
The above code is how I call the three tbls, the weird thing is that if I switch the order (savings with expenditure) then savings will be allowed to get updated and not expenditure.
