Basically I want to be able to save any data I enter into my data grid / dataset ermanently , so when i close the program or restart it the data I previously entered within the grid will be present.This is what I have so far
BindingContext(CustomersDs, "Customers").EndCurrentEdit()
OleDbDataAdapter1.Update(CustomersDs) is called Shop.mdb )
[code].....
I've seen similar problems posted on this and other boards, typically with a bunch of code checking before its realised that that database itself is being copied to another directory and run from there. Apparently this is managed via the database properties, copy to output directory settings. In my case I have tried all three options, with no change in result. After "saving", inspection of the actual database via the server explorer shows no changes have actually been committed.
I am getting to a point where I need to start entering large amounts of data into the app and have at actually save to the db for deeper testing.
I noticed this behavious first when using an .accdb and it has persisted through my exploration of SQL(.mdf)
db Output Option Selected / Result
always copy... data changes do not persist between debug runs and is not entered into actual database
copy if newer... data changes do persist between debug runs but is not entered into actual database (checked via server explorer)
Do Not Copy... generates the below Error on execution
System.Data.SqlClient.SqlException was unhandled
Message=An attempt to attach an auto-named database for file C:UsersXXXDesktopVisual Basic ProjectsSQLtestWindowsApplication4 - CopyWindowsApplication4inDebugMyDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
In my form i have a datagrid view and two textbox the textbox is bind with the datagrid..now when i click the data in the datagrid the data will go to the textbox (that's i want to happen) but when i click the update button and check my database it doesn't change.. i use ExecuteNonQuery to update my data.[code]...
View 11 RepliesI'm sure im just making a simple mistake some place but i just cant find it. I have datatable which I can and can make changes, save back to the database just fine. But if I reload the data after updating, no data is retrieved from the database. But if I stop debugging completely and then start again, it loads just fine...until i call Update.
Here is some code I am using for testing purposes.
Private myDataSet As New DataSet
Private conn As MySqlClient.MySqlConnection
Dim myDataAdapter As New MySqlClient.MySqlDataAdapter
[Code]....
I'm Using vb 2008 and an access DB.I have 2 tables in the DB which is transaction and products.When a Customer Buy product the transaction will record and the stock of that product will deduct accdg to the quantity bought by the customer. Myproblem is products table didn't update. Stock of that product still didn't change.
View 5 RepliesI am working on a project that stores data on animals. I am trying to make updates to data already stored there, through inputs on a VB form. A form where all the data is populating the fields shows up and the user can change/update any field. Once they are finished, they click update and the DB is supposed to reflect those changes (Theoretically)However, I wrote the code to do that, but when it runs nothing in the database is changed and nothing gets done, as it seems. No errors appear and nothing goes wrong with the program. It just doesnt change the data in the db.
View 1 RepliesI am working on a project that stores data on animals. I am trying to make updates to data already stored there, through inputs on a VB form. A form where all the data is populating the fields shows up and the user can change/update any field. Once they are finished, they click update and the DB is supposed to reflect those changes (Theoretically)
However, I wrote the code to do that, but when it runs nothing in the database is changed and nothing gets done, as it seems. No errors appear and nothing goes wrong with the program. It just doesnt change the data in the db.
Here is the code updating the database.
If txtNewID.Text = "" Or cmbRegion.Text = "" Or txtWombatName.Text = "" Or cmbGender.Text = "" Or txtAge.Text = "" Or txtWeight.Text = "" Or txtLength.Text = "" Or txtCommunity.Text = "" Or txtDescription.Text = "" Then
MsgBox("Please fill in all required fields.", , "ERROR")
Else
[code]....
I have two forms in my program, Form1 has ListBox which contains names from the Database.Form2, has textbox and add button to get a new name from the user.but when I click on add button.. i return to Form1 to view the names in the listbox by clicking on view button: ALL NAMES ARE DISPLAYED WITHOUT THE NEW NAME.when I close my program and click on View button all names including the new name that was entered before are displayed ! is there a way to display everything in the database without closing the program??I need a way to refresh or something.
Form1:
Imports System.Data.OleDb
Public Class Form1
Dim ds As New DataSet()
[code]....
I can't seem to save data in the database when updating a record. The record appears to be updated and even displays the new record on my form but as soon as I close and restart the program the old record is back and no changes are made to the database. Is there something im missing here ?
If CN2.State = ConnectionState.Open Then
Dim Comand As New SqlCeCommand("SELECT * From Incentives Where IncentiveCode = '" & TxtCode.Text & "'", CN2)
Dim rs As SqlCeResultSet
rs = Comand.ExecuteResultSet(ResultSetOptions.Sensitive + ResultSetOptions.Updatable)
If rs.Read Then
[Code]...
My form just isn't updating the row in the database: Here's my code:
Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnSubmit.Click
If Request.QueryString("a") = "edit" Then
Dim CategoryText As String = lstCategory.SelectedItem.Text
Dim conn As New SqlConnection("Data Source=.SQLEXPRESS; Initial Catalog=LogansArchive; Integrated Security=True;")
[Code] .....
I've never used nested SELECTs in SQL before so I'm not sure if I did it right. Aside from that, this is all stuff I've done before so I'm relatively sure that it's all correct. Finally, there are no errors being reported when I debug, although the updates don't seem to be coming through from the text fields (txtContent.Text isn't changing to reflect the new value).
I took a break from this program since I couldn't get it going. I just started it again yesterday and finally got it to pull data from the database to show past patient appointments in the appointment scheduler. Now I just need it to take the data from the pop up window and update the database with it so it's there after you close the program. I want it to update the EyeBase dataset and write it to the DB.
Here is the code so far:
Public Class Form1
Public Structure ScheduleOwner
Dim _index As String
Dim _description As String
Public Sub New(ByVal row As DataRow)
[Code] .....
Here is the form that pops up to enter patient information. I think I got it, I used this code:
Me.AppointmentTableAdapter1.Update(Me.TestAppointmentDataBaseDataSet1.Appointment)
And I can change things, click a save button, close it, then re-open to see the changes I made. New problem is when I try creating an appointment from scratch, I get an error saying "Column 'AppID' does not allow nulls." AppID is a column in the DB that I use to number the appointments. This seems like it's looking for a value when you create the appointment but I don't want it to. How can I have it ignore that?
when i add the record it saves and returns the save message box as it should and is viewable in the database where it saves to, but it is not viewable in the text boxes when looking back at the form until i close program and re open it, then i can see the record stored in the database, it just wont update the form,[code]
View 2 Replies[code]The above code does not insert data into table. Please fix this issue.Tell me the proper and most widely used way of Inserting, Updating & Deleteing Data in Database.
View 16 RepliesI'm trying to test some stuff out, like adding employees and stuff like that.
Now it used to run on an Access database, but I've made the jump to MySQL.
Now to add an employee I use this code
Private Sub btnOpslaanWerknemer_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnOpslaanWerknemer.Click
Try
[Code].....
now I get the following error: "Error: MySQL.Data - You have an error in your SQL syntax; check manual that corresponds with your MySQL server version for the right syntax to use near '?,?,?,?)' at line 1.
I start my project in vb.net backend is sql server i have completed my design now i start my coding but i am confused for connectivity code whether i used dataset or datable which is good? please give me best connection code for retriving,updating and deleting data from database..
View 1 RepliesI am currently working on a Database that collects information. Firstly, i use a new windows form to collect that data. I have it set up to where, when the form loads, the database is ready to collect the information fields. And then the form closes on the button click to add that data, it does not update that data table view. It adds it once i close the program and debug it again.
Code: (Open the windows form)
Private Sub btnAddNew_Click_1(sender As System.Object, e As System.EventArgs) Handles btnAddNew.Click
AddNewClientData.ShowDialog()
[Code].....
Problem two: I need to make a button that will increment a cell that was set as an Int, by one, but can't figure out how to put it into code.
How do you restore a dataset to the previous state before updating the database with a data adapter? I have a concurrency update problem that I believe to be caused by this. The update fails during the update and a rollback command is issued using a SQLTransaction object. However, now the rowstates of the rows that did not have errors have been changed to unchanged. So this record is no longer availible to be inserted into the database. When I updated the value that could not be null and then test the second update which runs just as the first does then I get a concurrency error. The update code is below:
[Code]...
Only my local dataset updates when adding, deleting or editing records.The Source Database is supposed to update on issuing DataAdapter. Update(dataset )However, when I check my source database after running the operations it remains the same as the original.
View 6 RepliesI have the following update statement to save data to an access 2007 DB:
[Code]....
I would like to know the best, or standard, way to accomplish real-time client updates in a small multi-user application using an access data table as a data source.Specifically, this application will be used by 3-4 people. It uses a datatable which is filled on form load and bound to a datagrid at design time. The datatable is stored on a shared drive. The data table on the shared drive is updated in two ways:
1) Users can update the datagrid which then updates the datatable on the shared drive via the data adapter's Update method.
2) A server application does some work on some text files, periodically updating the data table.
I need the clients to reflect the changes to the data table on the shared drive as closely to real-time as possible. I know that the data table stored in memory on the client is disconnected from the data table on the shared drive, so I must query again to get the updates.
1) Is there an alternvative model I can use which is connected, and which will automatically reflect the updates in the data table on the shared drive?
2) If not, what is the best way to check for changes in the data table (so I can know when to call the data adapter fill method)? I am planning to poll the drive for a change to the .mdb file, raise an event and then fill the data adapter when the event is triggered. I am using this method successfully now to check for changes to a text file in another application, and I know how to implement it?
I would like to know the best, or standard, way to accomplish real-time client updates in a small multi-user application using an access data table as a data source.
Specifically, this application will be used by 3-4 people. It uses a datatable which is filled on form load and bound to a datagrid at design time. The datatable is stored on a shared drive. The data table on the shared drive is updated in two ways:
1) Users can update the datagrid which then updates the datatable on the shared drive via the data adapter's Update method.
2) A server application does some work on some text files, periodically updating the data table.
I need the clients to reflect the changes to the data table on the shared drive as closely to real-time as possible. I know that the data table stored in memory on the client is disconnected from the data table on the shared drive, so I must query again to get the updates.
I have two questions:
1) Is there an alternvative model I can use which is connected, and which will automatically reflect the updates in the data table on the shared drive?
2) If not, what is the best way to check for changes in the data table (so I can know when to call the data adapter fill method)? I am planning to poll the drive for a change to the .mdb file, raise an event and then fill the data adapter when the event is triggered. I am using this method successfully now to check for changes to a text file in another application, and I know how to implement it
There is something wrong with my codes. I don't know why it isn't updating the records.If I activated the line dt.Rows.Add(newrow) it will just create an error on da.update(dt) line QuoteThe changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again.But if I deactivate that line, no errors will be occurred but the record won't update.
Here is my code
Dim dt As New DataTable
Dim ds As New DataSet
ds.Tables.Add(dt)
Dim da As New OleDbDataAdapter
[code]....
Whenever I try to update a row in my database, it works, but as soon as I restart the application, the changed information resets.[code]....
View 10 RepliesI have the following sql query that on debugging contains what looks like the right thing however the database is not being updated, but the code runs fine:
con.Open()
For i = 8 To ds.Tables("AddressBook").Columns.Count - 1 'Counts the amount of columns in the database
[Code]....
i am haveing problems updateing my customer details i was wondering if i could use the code i have for add and change it to update maby insted of useing the INSERT I could use a UPDATE or something anyway
Public Sub updateWithNewOrders(ByVal aOrder As Order)
Dim cmd4 As New OleDbCommand("INSERT INTO ORDER
(OrderID,CustomerID,OrderTotal,ODate,EmployeeId) VALUES (?, ?,?,?,?)", con)
[Code].....
I have an field which i have to update based on the selection of listbox.When i select listbox based on that when i update my fiels it should be updated
Dim cnstring As String
cnString = "Provider=Microsoft.Jet.OLEDB.4.0;Persist Security Info=False;Data Source=AirLine.mdb"
Dim sqlQ As String = "SELECT NoofCoachseatsAvailable,NoofCoachSeatssold FROM FlightDetails WHERE flightname='" & s & "' "
'Create connection
[Code]...
Dynamic SQL generation for the UpdateCommand is not supported against a SelectCommand that does not return any key column information. Is my selection (Based on Listbox selection) is the wrong part here.
the problem is when I click the 'save button' and then exit. Then open again, the total records still unchanged
the code used
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
Validate()
Supplier_s_informationBindingSource.EndEdit()
Supplier_s_informationTableAdapter.Update(Bookster_databaseDataSet1._Supplier_s_information)
End Sub
then I try to put Me.
Private Sub btnSave_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSave.Click
Validate()
Supplier_s_informationBindingSource.EndEdit()
Me.Supplier_s_informationTableAdapter.Update(Me.Bookster_databaseDataSet1._Supplier_s_information)
End Sub
I don't know if make a difference but how to update the database also, what code should I put?
i have published my website...its a dynamic site..so i have database connectivity..now i want to make an application in VB to update my database using my application..i mean i do not want to login to the site and update my database rather update it using my application..i want to connect my application to the database of the published site and update it from anywhere i want using the application...is it possible??
How can i do it??Please point me to the right direction...its urgent.
I am a newbee to the programming. So please guide me if i am wrong. up to binding of the datasource my programe working perfect but during save button it gives error.(Value can not be null. Parameter name : daatTable)
[Code]...
I'm having a database, using GridView I retrieve the data into my WEB application.Then I set the rows to editable (not sure if it is fully completed) and when I edit some cells I want to update the GridView AND the database behind.When I click on 'edit' then the button is changed to update. I get some unhandled exception. I don't expect anything else since I didn't put any code in the update methods like RowCommand, RowUpdating, RowUpdated, RowDataBound.
View 4 Replies
