I am trying to work out what exactly I am doing wrong. My code looks right but I cant seem to find why I cannot access my arrays from my structure in another procedure. I think perhaps my temp array is not declared correctly to my structure. why I cannot use it from another sub and explain if I an using the structure correctly. In my click_button, I am getting the error:'SuburbString' is not a member of 'System.Array'.
[Code]...
I have a dynamic are declared as global and one dynamic array in procedure , how is posible to put element from procedure array in global array
[Code]...
I am selecting a distinct user from IT_Cases_List and stored it in an arraystaff(). From this array, I will then call a Stored Procedure to count the no of cases attended by this user,(arraystaff(i)) and loop it until arraystaff.length-1
but the problem is that the count does not tally.
Sub getStaff(ByVal month As String)
If Not con.State = ConnectionState.Closed Then
con.Open()
[Code]....
ok, i've called only once getcases but i'm still having the same problem.
this is what i get when i run the program:
if i get Count(*) from the database, the total no of cases i should be getting is 132, whereas the total of cases i get from the program is 157 (7+7+20+20+49+49+5)
if i run the query from sql, this is what i should be getting
i notice that the Count number gets duplicated (7,7,20,20,49,49,5) instead of (7,20,49,5,10,27,13)
I'm a beginner and doing a review for my final...the question is-Write a Function procedure that takes an array of Strings, sorts it using Shell sort and returns the sorted array. I do not get shell sort at all.
View 3 RepliesI have a stored procedure in DBML and I try to pass the result to "sqlQryArray" as an array(1 dimensional array). But the bottom code causes error like below message. What else should be done?
Error 1 Value of type '1-dimensional array of aaaDatabase.stp_GetSomethingResult' cannot be converted to '1-dimensional array of String' because 'aaaDatabase.stp_GetSomethingResult' is not derived from 'String'.
The return result from stored procedure is a just list of first names of students(only one column)
Dim sqlQry = aaaLINQ.stp_GetSomething(bbb,ccc,ddd)
Dim sqlQryArray As String() = sqlQry.ToArray()
I did this and no error or warning appears and when I run it only String[]Array appears in the listbox. can you help me fix this? I already have the logic down I am not sure how to fix this. My project is due tomorrow this is the only part I'm stuck on.
[Code]...
I am trying to code for is as follows: Construct a two dimensional array and enter into it a sales id number followed by twelve variables which represent sales totals made by the sales agent. this must provide space for five agents. I can declare the proper array and have done so as follows
Dim Sales (4,12) As Double. I also crafted a click event which will count from 1-12 (which excludes the sales id number) and disables the sales id number so it cannot get used. [Code]
What I am trying to do is setup a function within the same click event procedure which stores the current SalesAmount as a variable in the array and moves to the next slot to get ready to store the next SalesAmount. However I have no idea where to go from here. I have tried a ton of different pieces of code which are either all littered with errors or do not return a value when I call it. Calling the total of each row and the total for all rows is something I need to do for display and I am not one hundred percent sure I know how to do that either.
I have 10 panels on a form and I was wondering if there is a more efficient way to loop through them to pass the data to my procedure instead of writing out each one the way I am doing
' sample shows only 3 but there are 10
For i As Integer = 1 To 3
Select Case i
Case 1
[Code]....
I am having trouble retrieving data from a stored procedure that I have set up as a Data Adapter using VB.NET 2005. The Database is SQL Server 2000, and what I am trying to access is a simple Stored Procedure that will validate a users login access. [code] I have a dataset set up as AdjustmentsDataSetspValidateLogin. I am trying to figure out in code how I can address this using a table adapter or how I can capture from a login form I have created the UserID and pass this value to the stored proc to return the current record, if any of the user.I initially setup a Dataset and dragged the dataset onto a form. Then I deleted the data navigator and the toolbar that was created by default so that I could just pass values to the Stored Proc. I also have the table adapter setup to return a table "LoginData" with the two fields Approver & Admin when I pass a userID.But I am having difficulty addressing the table adapter in code and pulling back the data values for the UserID I'm passing to the DataSet.Does anyone have any ideas on how I can call this stored proc and get the data values returned? I'm new to .net programming. [code]
View 1 Repliesi am trying to find examples of getting data back from a stored procedure that has no parameters sent to it nor has any returned output parameter. Though it does display data.How can i get that from my code im using below?
Dim myCommandSQL As New SqlCommand
Dim myReaderSQL As SqlDataReader = Nothing
Dim intX As Integer = 0[code]....
The @return_value i just put there to see what would happen but i got nothing returned.
I'm using Microsoft .NET Framework 3.5 to create a web service with VB.NET. I'm using a Stored Procedure in SQL Server 2008 so that SQL can insert all the data that I'm passing. The problem is that in one of the servicse I need to pass around 10,000 records and it's not very efficient to run the stored procedure 10,000 times.
[Code]...
I have two GridViews, the first works fine as I defined the datasource when I dropped it onto the asp page via visual studio and I specified the table to use.
The other GridView (dgvParams below) has just been dropped onto the asp page and I want to use it at run time[code]...
When I step through the code I can see row and column counts are as expected and call "dgvParams.DataSource = table".
I have the following code in my asp page:
Imports System.Data.SqlClient
Imports System.Data
Partial Class _Default
Inherits System.Web.UI.Page
[Code] .....
And while the page doesn't throw me any errors, I'm also not seeing any data in my datatable.
I have a procedure that imports data from Excel file. Something like this:
Public Sub ImportExcel(sFileName As String)
Dim xlsApp As New Microsoft.Office.Interop.Excel.Application
Dim nRow As Integer = 2
xlsApp.Workbooks.Open(sFileName)
[Code] .....
If user opens excel while procedure is running, then the procedure will use the excel sheet opened by user and not the one that was using before user opened Excel ...
I wish to create a stored procedure with multiple select statements. In addition, I then want to access each of the statements on the page load event. The purpose of the statements is to create multiple 'counts', and a number of labels on the page will each contain an individual returned count. At the moment I have created a basic stored procedure with two select statements:
CREATE PROCEDURE [dbo].[Finance_CustomerCount]
AS SELECT COUNT(Quote_ID) AS Count1 FROM dbo.generatedquotes WHERE (status = 2)
AND (Contract_End_Date >= GETDATE()) OR (status = 4) OR (status = 7) OR (status = 1)
SELECT COUNT(invoice_id) AS Count2 FROM dbo.invoices GROUP BY invoice_open HAVING (invoice_open = 'Y')
RETURN
I can then access the result of the first select statement by using this code:
Dim newconn As String = Session("ConnectionString")
Dim connection As New Data.SqlClient.SqlConnection(newconn)
Dim MyCommand As Data.SqlClient.SqlCommand = New Data.SqlClient.SqlCommand("Finance_CustomerCount", Connection)
[Code] ....
So what I basically need to know is, how do I access the second select statement result set for another label.
I would like to bind textboxes to certain columns from records generated from a stored procedure. The error I receive is "DataMember property 'spCustomerHeader cannot be found on the DataSource". I have no problem returning the data to a datagridview but I need this show this data in textboxes.
here is the code
daCusHdr.SelectCommand = cmd
daCusHdr.Fill(dsCusHdr,
"spCustomerHeader")
[Code].....
I have a table that I need to insert a set of records into based on user input. IE: Selection from a list of items to choose from. For this example, let's just say it's a collection of int's.
Not a lot of good examples on the internet. There's only one related question here on SO, but it lends no answers either (both answers are dead ends).
How do you setup the call into the Package from .NET? How do you setup the Package Procedure or Function to receive the collection? How do you process the collection once inside of the Procedure or Function?
I found a few examples online on how to import excel into sql via vb. but can i do it via stored procedure?
Insert into SQLServerTable Select * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=D: esting.xls;HDR=YES',
'SELECT * FROM [SheetName$]')
So like, can I pass in:
('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database=D: esting.xls;HDR=YES',
'SELECT * FROM [SheetName$]')
As a parameter to SQL Server SP?
ODP.NET Query - Error manipulating data from Stored Procedure??
View 3 RepliesThis is the error when i try to execute my code "Procedure or function 'Get Customer data' expects parameter '@Name', which was not supplied."
objCommand.CommandType = CommandType.StoredProcedure
objCommand.CommandText = "GetCustomerData"
Dim ObjParam1 As New SqlParameter("@Name", SqlDbType.VarChar, 2000)
[Code].....
In debugging, i c the value in ObjParam1.value that I'm passing.
I'm trying to sort an array based on a structure but whenever I do this, it basically erases all the data in the entire array.I have verified that the array is populated correctly, it is when using array.sort that everything returns blank.
View 6 RepliesI want to reading in a excel file and extract the sCodenumber sDescription ans the sStatus and store them in a array : StatusComposeArray(5200) As MyCompose. After this I need this array for comparing outside this class. But as can you see the array is defined inside the sub: ReadingIn_ExcelFilesCompose [Code]
View 2 RepliesThe instructions are as follows:
1. Write a Visual Basic Console Application.Inside the main procedure call a function procedure to input and return a value for a double variable called x, the width of a right triangle.Inside the main procedure call the same function procedure a second time to get a value for a double variable called y, the height of a right triangle.
2. From the main procedure call a function procedure which calculates and returns a value for the hypotenuse equal to the square root of (x squared + y squared).You will have to pass the values of x and y to this function procedure.The procedure should calculate and return a double type value.The value that is returned by this function procedure should be equal to the square root of (x squared + y squared).
3. Also from the main procedure call a sub procedure to display the values of x, y, and the hypotenuse.
In a tic tac toe game I am making there are two blocks of code that are identical except that they access different arrays:[code]Arrays plyrTaken and plyrPairs are used in the first block and cmptrTaken and cmptrPairs are used in the second. Is it possible to wrap these blocks into one Sub Procedure passing the different arrays when the procedure is called?
View 5 Repliesi have an array contains a-z.Then i have a textbox and when click on the button, it will replace the text inside the textbox to the index number of the array.Example, from "abc" will become "0 1 2" The code below do the job.how to do so that i can replace the text inside the textbox from "0 1 2" back to "abc" based on the array?
Dim txtKey As String = readKeyTxt.Text
readKeyTxt.Text = ""
For Each b As String In txtKey[code].....
I am trying to execute a stored procedure and place the data in a datagrid manually (without using the .net wizard). I am using vb.net and asp.net in visual studio.Here is my code but I can't figure out where I'm going wrong.
Imports System.Data.Sql,
Imports System.Data.SqlClient
Imports System.Diagnostics
Imports System
[code].....
I have a stored Procedure
CREATE PROCEDURE sp_DescriptionLookup
-- Add the parameters for the stored procedure here
@manfactureid as int
[Code].....
i have problem with inserting data to database by calling store procedure from sqlserver2005. i try to insert, but i can insert some field i don't know this problem correct the code below the procedure is :
[Code]...
I'm currently writing a small app that takes data provided by an SQL stored procedure and makes it available for easy export for non-tech savvy users. I'm trying to make this as generic as possible, in that you should be able to plug in just about any SP and follow my template to have an export utility. I'd like to add a way to get the column names before running the SP from the SP itself. I had assumed you could just run the SP with impossible values so nothing is returned, then get the columns from the resulting VB.NET DataTable. However, if there is no data returned, the column names aren't returned either. How can I get the column names from the SP without having to hard-code them?
View 1 RepliesI created a sql stored procedure that will insert data for me depending on user input. Now I would like to know usually I would do something of this nature
Dim con As New SqlConnection(connectionString)
Dim cmd As New SqlCommand("usp_userinput", con) 'references connectionstring and calls store procedure
cmd.CommandType = Data.CommandType.StoredProcedure 'sets default to be storeprocedure
lblMessage.Text = String.Empty
With cmd.Parameters
If (Session("UserInitials")) IsNot Nothing Then
.AddWithValue("@UserInitials", Session("UserInitials").ToString())
End If
End With
That is just an example how i usually approach calling the stored procedure in vb. However for this particular form I am going to have 50 or 60 textboxes which each one would require a session state variable.Seems a little tedious to have to create a session state variable for each textbox on the form.