check how long a process has been running? I'm using the below code to check whether these programs are running.
Is there a way to see how long they've been running?
Private Sub tmrKillJoy_Tick(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles tmrKillJoy.Tick
Dim local As Process() = Process.GetProcesses
[Code].....
It is my previous problem in vb6, its hard to multithread using vb6 so I migrate my codes to vb.Net.How can I multithread this two loops so that this process is running at the same time.Because when I start my second Loop, my first loop stop in executing. It will start again when my 2nd loop finished.
[code]...
I have 2 connected GSM Modem in usb port.That codes will send SMS in all contacts in my ListBox.
I am trying to write a Windows Script that will allow me to monitor the following: That 2 x seperate but specific processes within Component Services "Running Processes" list are currently running and have not reset within the past hour. If I already know the PID, then I can retrieve the CreationDate (I assume which I can use to check for restarts? or is this the actual process creation/installation date) for each specific process, however if a restart occurs the PID will change and my script needs to know what the new PID is without me telling it!
[Code]...
I'm trying to run the "Shell" command in a VB.NET project, to execute an external file. For example: Shell("c: empmyfile.txt").
For some reason this throwing a "file not found" exception, yet the file is there. Now I've looked around and found that others recommend using the "System.Diagnostics.Process" method, which does work, however I don't want the file to run in-process, which is what that does.
I want to run the file out of process, so that when my program ends, the executed program keeps running independently. Hence my attempt to use Shell() but it refuses to work.
Is there another way besides Shell() to run a file out of process?
i am trying to write a little program that checks for a process and kills is.here is the
Dim p As Process = Process.GetProcessesByName("Cheat Engine")(0)
p.CloseMainWindow()[code]...
My problem is it�s woking ,yes if the programm ,,Cheat Engine" is running the process is getting killed.But if the program is not running my program crashes.
I have written a windows service that is meant to launch a notepad when a specific action happens. The problem i have is that even though the service launches notepad, the actual notepad it self is NOT visible. I know that it has been launced because i can see the process in the task manager. By the way the process is listed as a SYSTEM process rather than a process under my user name (i believe that is because my process is a "LocalSystem" one).
View 4 RepliesTrying to create a button that when clicked will check to see if a certain process image is running and if that process is running give the process focus. If the process is not running then start the application.
View 9 RepliesI am almost sure this isn't possible but it's worth an ask... We have a .NET DLL that is being called from our VB6 application. The VB6 app runs in a 32 bit process so the DLL runs in the same process (it's compiled as any cpu) Therefore when I do my ODBC Database access in the DLL is will only use a 32 bit driver, as this is what it thinks it needs (for the record the DB is Pervasive PSQL)
My problem arises when the application runs on a 64 bit machine (when only the 64 bit ODBC driver is installed) as it can't find a suitable driver to use. So is there a way to force the .NET DLL to run in a 64 bit process (compiling as x64 doesn't work because register for COM Interop is not allowed) This isn't necessarily an issue at this point in time because I can install the 32 bit driver, but at some point in the future I can imagine that 32 bit driver may not be available so I will be up the proverbial creek.
how to run a process as a child process?
I'm using this code to launch a process:
Dim appdirect As String = Application.ExecutablePath
appdirect = appdirect.Replace("SIS.EXE", "")
appdirect = appdirect.Replace("SIS.exe", "")
[Code]....
It runs the process but I need it to run as a child process of SIS.exe.
I have an issue using Process.MainWindowTitle,Process.MainWindowHandle on some older VB6 applications. After Process.Start I use Process.MainWindowTitle to display in a listbox. The MainWindowTitle returned is not the Window Title but in fact the Project name of the VB6 exe.? I also store the MainWindowHandle to use the ShowWindow and SetForeGroundWindow API's. It would appear that the ShowWindow API does not work, but the SetForegroundWindow does. ie: if the VB6 app is minimized, showwindow does not restore, if it is NOT minimized setforewgroundwindow sets it to the foreground. The exact same code does work correctly for any other .net exe or notepad, only on these vb6 programs I am having a problem.
View 9 RepliesI have created a service which should give a welcome message while I login to my Laptop & "Bye" message when I logout/shut down.Its setting is so that the service gets started automatically. But it starts & sops immediately. When I try to start it manually I get the following message:"Welcome service on local computer started & stopped. Some services stop automatically if they are not in use by other services or programs".how to keep my service running so that I can test whether its doing what it should do..!!
Below is the code.
Public Class Service1
Protected Overrides Sub OnStart(ByVal args() As String)
' Add code here to start your service. This method should set things
[code]....
i search a lot, and i not found any answer i decided to make a thread here i want to khnow how to make a program, that program see if the process is running, and is the process is running, then make something
[Code]...
I have a program which i need to open a program called VEngine.exe. The program i wrote is running through scheduled task every 5 minutes to check if the VEngine program is running. If it is not running it will start it.
Everything works, however if i log off the server and i kill the VEngine. The scheduled task STARTS VEngine.exe however there is no Gui Display.
[Code]...
I hope the title gives a good description, i have read the forum posting tips at the top. Ive just joined the community and nice to meet you all. Anyways, I am trying to create a vb.net application for which it will check if a process is running in task manager, and if this process or processes are running to end a different process. Let me give you an example,
If processA, ProcessB is running then END ProcessC. If however ProcessA, and ProcessB are not running then ProcessC can stay active. I have started the project and am able to kill the processes etc. This is shown below.
[Code]...
Im working on a small virus removal application, and i have a piece of code to check if a process is running,although, it doesn't seem to work.The code is as follows:
ListView2.Items.Add(TimeOfDay + " - Starting Process Scanner")
Dim Vir As Process() = Process.GetProcesses
Dim a As Integer
For a = 0 To Vir.Length - 1
Debug.WriteLine(Vir(a).ProcessName)
[Code]...
I'm not sure how I would use Process.GetProcessesByName()to check if a process is running, and if it isn't start it, using VB.NET?I know how to start a process using Process.Start().
View 2 RepliesI just need to check whether a process is running. But I have absolutely no idea where to start!
View 10 RepliesI need to create a program that checks to see if a certain process is running, but I need to check it at a predetermined interval, such as every 10 seconds. I also need it to relaunch the program if it disappears/crashes. I have no idea where to start, I'm assuming I'd have to use a timer and write a method that checks for this process and then another method to simply launch it.
View 3 RepliesI am trying to get the arguments on a running process but I dont know what I am doing wrong.[code]...
View 2 RepliesI have written a application that searches the users computer for all files within a specified folder.Sometimes the number of files can be quite large. I would like the user to able to interrupt (end) this process.My code is handled by a button click in a VB win form.[code]I have tried various MsgBoxes that warn the user but I think a Esc Key or a Cancel button would be better.
View 8 RepliesHow to kill a process?[code]...
View 2 RepliesI am waiting for another process to finish:
Process.GetProcessById(processID).WaitForExit()
But sometimes it already ended before I even get to this line of code, so it throws an exception that the process is not running. I don't want to catch this using a try catch, but using a if statement. How can I do this?
If Process.GetProcessByID(processID).IsRunning = true then
something like that...
This is the command line I want to use inside my VB.NET program. Look for the running process "mpc-hc.exe" and get the commandline of the running processwmic process where name='mpc-hc.exe' get CommandLineI want to retrieve the output from that command into a string. I know that it could be done natively in a VB.NET program and I have looked at how it was done. However, I cannot get the code to perform what it did in the commandline I have above.
View 1 RepliesI'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running. How can I solve this?
The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.
[Code]...
I need to check if a certain process is NOT running. So until now i've been using a loop and if it doesn't find the process then it alerts me (with MsgBox) however now i realized that the for each loops looks on each process and if that process isn't the one im looking for its gonna give me an alert, that it was not running even when the next process could be the one i need to know about. [Code]
View 6 RepliesHow can I check every minute if a process is running: (notepad.exe)
View 9 RepliesI just want add new feature on my game launcher, that can be detect game.exe is running or not, I can detect it but I want program label1.text will be "Game Stopped." After game.exe is closed. For example:User Start the game, because window title of game.exe is "game" so I am using this to Detect game.exe: [code]
View 7 RepliesI'd like to make my app check for a running process, I know how to make it check for a running process by its name but not by its location.
It would be extremely helpful if someone could solve this issue for me.
trying to detect the process, if it is not running, then only run the process, but it still runs the process eventhough the process is still running :(
For Each Proc As Process In Process.GetProcesses()
Dim strProc As String = Proc.ProcessName & ".exe"
If Not strProc = "MemberSyncFBtoSQL.exe" Then
[Code]....
I'm calling the following method from a button click event to export a datatable to excel. After the export is completed, the excel application object is quit, released and assigned to nothing. But in reality it's not getting released and stays active unless the entire application is closed. So every time the button is clicked for export, a new excel application object keeps on running.The problem doesn't occur if two of the lines from the method below are not used. But I can't omit them as they are really needed. Check the * marked lines.[code]
View 4 Replies