VS 2005 - How To Connect Oracle Database With ODBC
Nov 21, 2010I do need to connect oracle database via odbc in my vs 2005 project. I have no idea how to connect, kindly give me connection string codes and prerequisites.
View 7 RepliesI do need to connect oracle database via odbc in my vs 2005 project. I have no idea how to connect, kindly give me connection string codes and prerequisites.
View 7 Replieshow to connect to database using ODBC, where in connection string i will provide only DSN name. User id and Password should be entered dynamically. Like if i want to connect to SQL Server, I will provide dsn name, User id and password shud be entered dynamically. Already there is a form in SQL Server for Logging in, want to connect to tat?
View 2 Repliesconnect Oracle 10g using vb.net in MS Visual 2005.
View 2 Repliesconnect Oracle 10g using vb.net in MS Visual 2005.
View 2 RepliesIn the old version Visual Basic 6, my code to connect to our Prophet 21 Progress database was:
Global DBConnect (5) as new ADODB.connection Global DBRec(5) as new ADODB.recordset Public Function Open_P21(SQL_Str As String, Ch As Integer, Status As Boolean)
[Code]...
I have some deprecated code in visual basic when connecting to an oracle database. I am using a OracleDataAdapter but it says that this has been deprecated. Does anyone know what the new supported code is to connect to a database?
View 2 RepliesIf the following is my code in VB6 to connect to Database (Oracle 8i) then what would it be for VB.Net (VS 2008)....?
[Code]....
Well for some reason when i try to add a reference so that the oracle database can connect to the VB.NET 2010 program.In other words it shouldn't highlight certain code as if the database is not connected.Here is a clear summery as best as i can say what the problem is.
1. Connection from Visual Studio 2010 to Oracle plus server
2. Adding References will not be allowed for some reason.
3. The code (See example below on what it might be) is still highlighted even when i added the references several times.
I'll show just a small snip of the code coz it's more or less the same on most of the forms if i want to either update, delete, add or amend to the database. I'll show a few screenshots so to be clearer.I've tried by even looking over the notes and followed step by step and nothing works.Since i am not registered in this module this time i can't seek help of the lecturer so don't bother telling me to go and ask my teacher I've pestered the supervisor that i'd have to present this project to and she hasn't replied to my email at all so i have no clue what else to do in the matter.
I have a vb.net application that will not connect to an oracle database on the PC that I publish the app too. It works fine under my pc both in design and when I publish it to myself. But it will not connect under the pc I publish it too. I do have oracle installed on the pc and have the connection setup exactly as I have on my own pc. I am sure it is a file path issue, or at least I believe it to be that.
View 5 RepliesI have two small VB.NET applications that connect to the same Oracle database. One uses the OLEDB provider, and the other uses Oracle's ODP.NET. Should I expect to see problems with the OLEDB provider, as it's less 'native' to Oracle?
View 1 RepliesIs it possible to use a JDBC connection in a VB.net application? I am unable to find any example code in order to connect to an Oracle Database using JDBC within .net without the need to use Oracles .net drivers (they seem to not work without the Oracle client being installed and thats a licence problem)
View 2 RepliesI'm using crystal reports 9, visual studio 2008, and oracle 9i in this project I'm doing. My crystal reports pull data from an oracle database, and are displayed on a CrystalReportViewer on a windows form. How would I make this connection using vb.net code?[code]...
View 1 RepliesI'm trying to to connect to a Oracle database and read the content to a textbox. This is my
Dim conn As OdbcConnection
Dim connectionString As String
Try
[code]....
Connection is ok, (I think) Connection Open shows in textbox, and no errors. But I get a nullexeption on the reader, it has not been assign a value. Don't know what to do next.
I use Microsoft ODBC For Oracle, and process a distributed transaction with ransactionScope, but, the code throws a error: ERROR [HYC00][ORACLE][ODBC]option not implement, my code is in vb.net.ere is my code:
sub Main()
dim strConn1 as string = "Driver={Microsoft ODBC for Oracle};Server=server1;UID=user1;PWD=pwd1;"
[code].....
I'm trying to develop a simple app with vb.net in VS 2010 that could monitor the ODBC connections via DSN made on the macnhine running this app.My scenario is an application (non Vb) running on a workstation that connects to an MS Access database on a network share.
The application (non Vb) connects using a link (ODBC connection via Oracle 10G) to the tables on the Oracle side.My VB.net Application should monitor the machine running the main application for ODBC connections drops and alert me via email for example.My question is where in the framework can I find something to instantiate or reference in order to check ODBC connections states constantly as well as network disconnection issues as well so I can log and /or alert when possible for network problems and ODBC connection problems for all the applications that might run on the host (machine running my vb app).
I'm connecting succesfully to an Oracle 10g DB with an the Microsoft ODBC for Oracle driver.Regular queries without parameters work fine, but parameterized queries act as if the parameters aren't getting passed in.ex.
--this works fine
Select * from tbl1 where column1 = 'test'
--this doesn't
select * from tbl1 where column1 = ?
--odbc string parameter 'test'
Here's what my connection string looks like:
"Driver={Microsoft ODBC for Oracle}; " & _
"CONNECTSTRING=(DESCRIPTION=" & _
"(ADDRESS=(PROTOCOL=TCP)" & _
[code]....
I'm converting some RDO code to ODBC Provider code in .NET.The problem is parameter names were not specified in the orignal code, but param values were retrieved by parameter name after the command was executed.Is there anyway to have parameter names populated by the provider once the command is executed so calling code can access params by name.Let me show you an example of the declaration of param and accessing of it.
[Code]...
You can now see how this "used to work in RDO/VB". For some reason it would accept this and know what the param names were after execution. I imagine it had to do another round trip to the db to get this info.
Is there anyway to mimic this behaviour in .NET for ODBC Provider (using Oracle)? Or am I stuck manually specifying the param names in the code (I understand this is the better option, but wondering what the alternative is to match the original code as closely as possible).
If I have this to read from an access database, how could I translate it to read from an oracle database with the same table/field information? I know nothing about oracle but I assume I cannot use the oledbdataadapter that I am used to when connecting with an oracle DB.
[Code]...
how to connect to access using odbc since i did it already:
Imports System.Data.Odbc
......
Dim ODBC_CON As New OdbcConnection("dsn=DBMS Project")
[Code]....
how could i display it on the msgbox on the event that i clicked the button named "proceed" i provided much information as i could and same with as the code, i just need guide, simplest one for me to understand
We have windows xp with sp3. The MDAC version on my machine is 2.81.1132.0. We notice that with this version of MDAC we are not able to connect to Microsoft ODBC driver for oracle. For MS ODBC to work we should have xp with sp2 or MDAC version 2.82.3959.0.
Is there any way to connect to MS ODBC using sp2 or version 2.81.1132.0 in XP?
i used this code (below) but it have error on this line "dAdapter2.Fill(dSet2, "BPC_EMPLOYEE")"
Dim ConnectionString As String = "Server=bpc-k2;Database=FIXED ASSET DISPOSAL;Integrated Security=SSPI"
Dim mySQLConn As New SqlConnection(ConnectionString)
mySQLConn.Open()
[code]....
How do I connect to Mas90's file using their ODBC that they setup
View 10 RepliesI'm supporting an old vb.net program whose database it connected to was moved from SQL Server 2005 to SQL Server 2008. Is there a setting on SQL Server 2008 which will allow ODBC connections to access the database but not allow VB.NET to connect to it programmatically?
[Code]...
every time i try to establish a data connection between vb 2010 and sql 2005 i get the following error message QuoteA network-related or instance specific error occurred while establishing a connection to SQL server.the server was not found or was not accessible .verify that the instance name is correct and that SQL server is configured to allow remote connection .(Provider:SQL network interface,error:26
View 6 Repliesconnect vb.net 2008 to sql 2005 database.
View 1 RepliesI'm trying to connect to a sql server 2005 database. I'm using the following connection string.
Dim cnn As OleDbConnection = _
New OleDbConnection("Provider=sqloledb;Integrated Security=SSPI;Initial Catalog=Iconics")
Using this connection gives me the following error :
Error : Microsoft OLE DB PROVIDER FOR SQL SERVER : [DBNETLIB][Connection open(connect()).]SQL Server does not exist or access denied.
Does anybody know what is wrong with this connection string.
I can connect to both databases with SQL Server Enterprise Manager, so I know the servers are up and available. One of them is SQL1, the other is SQLTEST.In my program when I use the following connection string, it work connects just fine:
conn = New DBConnect("Data Source=SQL1;Initial Catalog=SignInspection;Integrated Security=SSPI")
However, if I change SQL1 to SQLTEST the connection times out I don't get any errors other than the timeout error.I can run the profiler on SQLTest and see that it is most definitely NOT even attempting to connect.
EDIT:Well, it's a moot point now because I got authentication working properly on our SQL1 server.
First off, the web server is running IIS and .NET. Users are logged in to the intranet using Active Directory, and the .NET page needs to retrieve their log-in credentials (username most notably). The database is SQL Server 2005, running on a different machine. But the .NET app needs to impersonate as another user to connect to the database.
To successfully do both of these things go to Windows > Run, enter inetmgr and hit run. Navigate to the site and right click > properties, then click on the tab titled Directory Security, click Edit.., make sure only Integrated Windows Authentication and Digest authentication are enabled. Enter your proper AD realm and click OK. Apply the settings/hit OK.In web.config you need the following lines
<authentication mode="Windows" />
<identity impersonate="true" username="myDomainMyUserName" password="123mypasswordgoeshere">
replacing, of course, myDomainMyUserName and 123mypasswordgoeshere with the username and password that has login rights on both your domain and your sql server. The connection string can probably be modified, but this is mine and it works:
Server=SQL1;Database=SignInspection;Trusted_connection=True;
One of my testers is testing my program that imports an XML file and puts all the data into correct fields in an Access database. He said on his Vista laptop he got an error saying: "Microsoft.jet.OLEDB.4.0 provider is not registered on local machine"
I know you don't have to have Access installed to run my program and I'm pretty sure all the OLEDB objects are in the .NET framework so why is it saying that?
I would like to connect my database to a treeview. Here is my code so far. It is connecting BUT i have problem. SEE the image below
[Code]...
The image below is showing my problem. The Groups are all shown. I would like to see 2A , 3A, 4A ...(so only ONE 2A) .and so on... and then click on the node to open with all the students in that group...
i got a probleam with database connection. check my coding. For info i am using server sql 2005 and microsoft visual studio 2005. I also highlight the which cause me a probleam..
[Code]...