VS 2005 How To Focus The TextBox On Toolstrip
Aug 19, 2010
I have two Toolstrips(tsp). Among the two the second one is hidden. There is a tsptextbox on the second tsp. When the user checks the button on the first tsp, i want the second tsp to be shown and the tsptextbox should be selected. I use the following code but the tsptextbox isnt getting the focus
View 3 Replies
ADVERTISEMENT
Apr 22, 2009
i have a textbox and a button on tool strip. i wan to set focus on the button when user enters data in textbox. after enter key is pressed it shoul focus on the button.
View 1 Replies
Mar 24, 2009
I really want to make use of the toolstrip and databinding but these two technologies keep conflicting with each other. I think the root cause is something to with the fact that the toolstrip buttons don't recieve focus in the normal way.
I invite you to try the following:-
1. Create a form and put some text boxes a tool strip with a save button on it.
2. Write a query or sproc to get a datatable back and bind your text boxes to the field in the datatable.
3. In the code behind your Save ToolStripButton put some code that makes an arbitrary change to a field on the dataset (it doesn't matter whther this field is bound to a text box or not). eg:-
m_DataTable.Rows(0).Item("CommissionRatePerc") = "0.0000"
4. Put a breakpoint in the save and run the form.
5. Make some changes in the text boxes. Do not leave the last text box but rather click save while a text box whose contents you have edited still has focus.
6. When your code hits the breakpoint, query the value of the data table field that is bound to the text box you were editing when you clicked save - it will still contain the unedited value. Unless you do something about it that unedited value is going to get saved back to your DB.
We did get around this problem by explicetely setting the focus to another control on the form before saving. That worked most of the time because it prompts the text box to flush it's value back to the datatable (nb EndEdit does not work, although you'd have expected it to). However, and this is the reason I suggested you add a line of code that changed a value in the underlying datatable in step 3, if you change a value in code in this way before the value from the text box get's flushed back then it doesn't seem to matter what you do, the user's current edit is simply lost. They will still show in the text box, though, leading your user to believe that the change has been committed when it hasn't. Our final solution is that we never ever change a value in the adtaset in the code behind our toolstrip buttons. That's working but it's a pretty big restriction.
View 15 Replies
May 28, 2012
I created a toolstrip with some buttons. I have a form with some objects (like textbox,checkbox,button etc.) and when i get the focus on last item,when i finish to compile i need with tab on keyboard to get focus on save button on the toolstrip.
View 1 Replies
May 13, 2009
how to focus the last lines of a Multiline TextBox,after the TextBox is changed.If i select the last lines, he doesn't focus that lines.
View 2 Replies
Aug 11, 2009
It seems that if I use .ShowDialog for a printdialog from a toolstripbutton then the dialog does not have focus, I have to click on it twice to change any options.. If I call it from a regular button or menu, it works fine...
I found that this was a confirmed bug but there was no posted workaround..
View 10 Replies
May 9, 2009
Im using buttons from A to Z in a toolstrip which I need to capture the text property of the button which trigger click event. I do it this way which took a long coding to mention all buttons (A-Z) click events.
vb Private Sub az_btn(ByVal sender As Object, ByVal e As System.EventArgs) Handles A_ToolStripButton.Click, B_ToolStripButton.Click ... Z_ToolStripButton.Click
'shows text property of the clicked button
MessageBox.Show(sender.ToString)
End Sub
is there any efficient way to do this?
View 6 Replies
Aug 22, 2009
how can i change the menustrip & toolstrip to green? because the default is blue?
View 9 Replies
Aug 6, 2009
I have a toolstrip on a winforms application and below it a DataGridView. Everything looks fine when the program runs initially. If I maximize the form though, the DataGridView covers part of the toolstrip. How can I make the toolstrip lock in place so that nothing will overlap it?
View 4 Replies
Feb 1, 2009
I have been playing with the Windows API.A Windows application typically has a TitleBar (with a caption on it), underneath is a MenuStrip, under that a ToolStrip (with the tool icons on it), and under that the main application area.I want to be able to strip everything off, except for the main application area.I have found how to hide the TitleBar, using:
GetWindowLong (and passing to it the handle of the form, and GW_STYLE to get the current windows style)SetWindowLong (and passing to it the handle of the form, the InitialStyle, and ORing with it WS_DLGFRAME) how to remove the MenuStrip and ToolStrip to leave just the main application area?
Code so far:
Public Class Form1
Private Const WM_SYSCOMMAND As Integer = 274
Private Const SC_MAXIMIZE As Integer = 61488
[code]....
View 4 Replies
Sep 16, 2009
I have just been editing some of the icons on a toolstrip and now I find that I have completely lost all of the toolstrip, menustrip and statusbar data.All I have left is blank controls.
View 3 Replies
Jun 23, 2010
How to make sure that the an focused(selected) textbox performs its validating event before the user clicks on the toolstripbutton?
View 5 Replies
Jul 1, 2009
when clicking a button, the current date is inserted into a textbox and the focus is transfered to the textbox.
the problem is that Textbox15.focus() select the text inside the textbox. i wish to give that control the focus but place the cursor at the end of the text, with no selection.
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
TextBox15.Text = TextBox15.Text & DateTime.Now & " "
TextBox15.Focus()
End Sub
View 2 Replies
Dec 8, 2010
I would like a textbox to auto-size when the form is maximized and minamized. Like Internet Explorer when the address bar gets shorter and longer when you resize the window. I think the code so far is[code]...
View 3 Replies
Jul 18, 2009
Is there any way to remove the textbox's focus when mouse is clicked in the textbox? the blinking focus in the textbox is not needed for kiosk system. so i try remove it with
[Code]...
View 2 Replies
Oct 25, 2011
Basically, I have a form with about 15 text boxes. Most are in different tab pages. By default, text boxes allow anybody to copy and paste by using keyboard shortcuts.I added a tool strip up top and make the "Cut", "Copy", and "Paste" buttons. What I want to do is make them work for whichever text box was last focused. So if I click the Cut button on the tool strip, it will cut the text of the
last text box that was focused.
Example:I open the program and type in TextBox1. Then I type in TextBox2. I want to copy the contents of the last text box by using the Copy key at the top, so I click that and it copies TextBox2 as it was the last focused textbox.
Like I said, I'm not fully sure how possible this is as I do have many. The whole reason I have the tool strip is for users that prefer using a mouse for everything rather than keyboard shortcuts.
Visual Basic for Applications (VBA)
Visual Basic 6 (VB6)
Visual Basic Script (VBS)
Convert C# to VB
View 4 Replies
Dec 12, 2010
For validation of a textbox i am using :-
Private Sub t4_LostFocus(ByVal sender As Object, ByVal e As System.EventArgs) Handles t4.LostFocus
If Not IsNumeric(t4.Text) Then
[code].....
View 1 Replies
Mar 3, 2009
I am writing a control in WPF that draws a shape on a form and then draws dimensions of this shape. These dimensions are editable so they are shown in a text box. When the user changes a dimension in a text box the shape is updated. I am updating the shape when the textbox showing the dimension loses focus i.e. as soon as the text box loses the focus the shape and all the dimensions are redrawn.
A text box loses focus in one of two ways - either when user presses tab key or when user clicks in another control outside the text box. My problem is that when user presses tab key or clicks somewhere else outside the text box the whole control is redrawn and the focus is not set to the next control where it should be. This is really annoying because tabs stop working altogether and to set a focus using mouse the user has to click twice.
An image of my control is shown below
View 1 Replies
Jan 19, 2011
I have a form with + 50 controls and with key numeric screen to write in only 5 textbox of this form.I am using this code to write in these textbox using key numeric screen:[code]I need to know which of these 5 textbox had the focus before touching the numerical button.I have seen this code from this post Find out the control with last focus to find last focus:[code]But how I do it in a form with + 50 controls (Controls of many types: buttons, checkbox, combos, textbox, etc.) ?
View 2 Replies
Oct 27, 2009
Suppose I have 5 texboxes on my form,named Textbox1,Textbox2 & so on.I want that when the form load,curor is on Textbox1.I write
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TextBox1.Focus()
End Sub
But its not working?
View 3 Replies
Mar 30, 2009
How do you accept key presses when the form does not have the focus? Do you need to use a different event?
View 4 Replies
Jun 5, 2011
I use visual baisc 2008 if i use "mouse click" or "use arrow keys " in the datagridview1 then i want that always the focus in on the textfield => Number_Pieces.text.[code]
View 2 Replies
Aug 28, 2011
In my project exercising the PrintDocument Control, I want to set the font of one of 5 text boxes, Print location, etc depending upon which textbox has focus. I was hoping to loop through a text box array until the box with focus is found and use a vb6 trick like 'If tb(i).gotfocus then SetFont(i)' but the 'gotfocus' property seems to be missing in vb.net.Although I could use a button click or mousedown event
View 4 Replies
Mar 23, 2012
I have a few textboxes for inputing values in, but i want a textbox to prompt me if I have made a mistake inputting values, as well as setting focus on that textbox with the mistake, how do I go about doing that? So far, I have[code]...
View 1 Replies
Apr 24, 2009
When the form loads, I query the dataset, and populate the dataGrid with initial values. My problem is that I cannot set the focus to the textbox. I have done the obvious (textfirstname.focus()), in the form loaded event. (and yes, I'm attempting to set the focus AFTER I have dealt with querying and filling my dataGrid).It seems that no matter what I have tried, the cursor always begins in the first row, first column of th
Private Sub Newemployee_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
TxtFirstName.Focus()
[code]......
View 2 Replies
May 8, 2012
I am entering a values into another textbox and I want it to surrender Focus to another textbox if the value I have entered is the same as the one in the database.However what is happening is that if the value is the same as in the database the cursor just disappears and it does not give focus to the control that I want it to give focus to. Any ideas on how I can correct this.
Private Sub txtProducedAt_TextChanged(sender As System.Object, e As System.EventArgs) Handles txtProducedAt.TextChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
Dim dTable As DataTable = New DataTable
da.Fill(dTable)
If dTable.Rows.Count = 0 Then
Exit Sub
ElseIf dTable.Rows.Count > 0 Then
txtProducedAt.Text = dTable.Rows(0)("SiteName").ToString
txtAccountNumber.Select()
End If
End Sub
I've tried putting code into the tabindex changed event but its not doing what i want and also in the lostfocus event
Private Sub txtProducedAt_TabIndexChanged(sender As Object, e As System.EventArgs) Handles txtProducedAt.TabIndexChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
Dim dTable As DataTable = New DataTable
da.Fill(dTable)
If dTable.Rows.Count = 0 Then
Exit Sub
ElseIf dTable.Rows.Count > 0 Then
txtAccountNumber.Focus()
End If
End Sub
View 2 Replies
May 8, 2012
I am entering avalues into another text box and I want it to surrender Focus to another textbox if the value I have entered is the same as the one in the database.However what is happening is that if the value is the same as in the database the cursor just disappears and it does not give focus to the control that I want it to give focus to.
Private Sub txtProducedAt_TextChanged(sender As System.Object, e As System.EventArgs) Handles txtProducedAt.TextChanged
Dim iSql As String = "SELECT ID,SiteName FROM Sites WHERE SiteName = '" & txtProducedAt.Text & "' "
Dim da As New OleDbDataAdapter(iSql, LoginForm1.Conn)
[code]....
View 2 Replies
Jun 22, 2010
When a Windows Forms TextBox control first receives the focus the cursor has to be there at first position in the Textbox.
We have tried to resolve the above issue by adding below code in form load event.
TextBox1.SelectionStart = 0
TextBox1.SelectionLength = 0
Now, when a Windows Forms TextBox control first receives the focus, the default insertion (cursor) within the text box is to the left of any existing text. The user can move the insertion point with the keyboard or the mouse. If the text box loses and then regains the focus, the insertion point will be wherever the user last placed it.
But the problem is when some operation is performed in TextBox_Leave event, it will loose the focus. Again when it receives the focus, the whole text is getting selected instead of showing cursor where the user left.
View 6 Replies
Dec 19, 2011
I'm making a desktop application in vb.net. When I click the back button (placed by me) on any form it hides current form and shows previous form but when i go again to the form from which i had hit back button then the focus cue still remains on the back button but I want the focus to be on the first textbox on that form or any specific button on which I want.....How can i achieve this...
I have already used some code to shift focus from one textbox to another when i press enter key...but it doesn't work in the above mentioned case....I'm using vb.net in visual studio 2005...This is the code i'm using for shifting focus among textboxes
Private Sub party_code_KeyDown(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles party_code.KeyDown
If e.KeyData = Keys.Return Then
party_name.Focus()
End If
End Sub
View 1 Replies
May 30, 2012
Private Sub txtOPass_KeyUp(ByVal sender As Object, ByVal e As System.Windows.Forms.KeyEventArgs) Handles txtOPass.KeyUp
txtOPass.Text = Replace(txtOPass.Text, Mid(txtOPass.Text, Len(txtOPass.Text), 1), "*", 1, 1)
[code].....
View 7 Replies