How do I run a SP using an ODBC data source name?I can do it using a hard-coded connection string, but I don't want that. I want my program to be more flexible, so it will run on any computer.[code]How would I do that with ODBC, instead of a hard coded string?
View 1 Replies
I'm running the following code and I get no error and the stored proc doesn't run. I've tried with different syntax on the stored proc (exec <stored> <parm>) and that didn't work either. I'm connecting via Sybase ODBC. I've also tried with command type text and got the same results (no error and the proc doesn't run).
[Code]...
I use codes below to inserts values to database by executing stored procedure.
Dim connstring As String = "dsn=test"
Dim oConn As Odbc.OdbcConnection = New Odbc.OdbcConnection(connstring)
Dim com As New Odbc.OdbcCommand("{? = call sp_test1(?,?,?,?)}", oConn)
[Code]...
This is my Stored Procedure Code to get the customer mobile value:[code]I was try to get this value into lblGetCustMobile (Label Control) using this [code]but nothing happened, can any one make this code get the mobile NO. into lblGetCustMobile?
View 3 RepliesI wish to create a stored procedure with multiple select statements. In addition, I then want to access each of the statements on the page load event. The purpose of the statements is to create multiple 'counts', and a number of labels on the page will each contain an individual returned count. At the moment I have created a basic stored procedure with two select statements:
CREATE PROCEDURE [dbo].[Finance_CustomerCount]
AS SELECT COUNT(Quote_ID) AS Count1 FROM dbo.generatedquotes WHERE (status = 2)
AND (Contract_End_Date >= GETDATE()) OR (status = 4) OR (status = 7) OR (status = 1)
SELECT COUNT(invoice_id) AS Count2 FROM dbo.invoices GROUP BY invoice_open HAVING (invoice_open = 'Y')
RETURN
I can then access the result of the first select statement by using this code:
Dim newconn As String = Session("ConnectionString")
Dim connection As New Data.SqlClient.SqlConnection(newconn)
Dim MyCommand As Data.SqlClient.SqlCommand = New Data.SqlClient.SqlCommand("Finance_CustomerCount", Connection)
[Code] ....
So what I basically need to know is, how do I access the second select statement result set for another label.
The store procedure which give me the information I need is:
USE [UCSMIS]
GO
SET ANSI_NULLS ON
[Code].....
When I try to add it to my report it gives an error, is it because of the temp table and how should I go about it?
I have a stored procedure in sql 2005 and I want to use it to validate user login in vb 2005 when users lgin with their username and password
View 4 RepliesWhat i am trying to achieve is relativly simple but for some reason i cannot get it to work. I would like on form loads for the contents of a textbox to set the value of a parameter @CustID and the Stored Procedure to be used to return the result into a DataGridView.My datagrdview1.datasource= "StoredProcedure1" but how to i set the parameter value and tell my app to execute.
View 29 RepliesI know there are the 'Wizards' to help me, but I need the code to access the Table Manager, the data set and so on, create them in my project and access the tables or stored procedures
View 2 RepliesI am not sure what I am doing with this and need some direction. I have attempted to create a stored procedure in SQL Server 2005 called proc_GetPrefixes with the following content
USE [CRM]
GO
ALTER PROCEDURE [dbo].[proc_GetPrefixes]
[Code].....
The stored procedure is supposed to get all the records and what I want to do with the result set is to add all the items to a combobox. I have started off with the following and not sure where to go with this:
[Code]....
I have a stored procedure to update a table, but needs a couple of values from another table.
the first two selects get the value from the table and then are used in the update statement.
The select statments:
Select @iStatusDropDownValueID = iDropDownValueID
From DropDownValue
Inner Join DropDownValueType On DropDownValue.iDropDownValueTypeID =
[Code].....
First, the values that are retrieved by the first two select statements are always the same. So they could be passed in by the code itself. I don't know that this will speed things up at all, just make the entire stored procedure better and easier to read.
Second, if the "Value Name" should change this store procedure will break (which is possible, but not often).
I am looking for any insight into the Best Practices for this situation.
I have developed a small ms-access based software with vb.net.
I've added auto-update capabilities to the software (mostly by using clickonce) to simplify the release of new features.
Every version of the software executes the update routine which may update also the existing database.Lately i've made few changes on the database structure adding few stored queries, so i want the autoupdate code to programmatically add these new queries to the existing database and make it perfectly up to date.
I haven't already found a solution to add stored queries to an ms-access database using odbc...I also tried to use the "CREATE PROC" sql statement but it does not seem to work with access databases, even if i create the query form the Microsoft Office Access front-end.I've found some examples that uses ADODB, but i'm using odbc to remain both x86 and x64 compliant.
I want use a stored procedure in my project but I have no idea about it. Please could you tell me a little bit about how to use I can use one in my vb.net application ?
View 2 RepliesI have noticed the following but unable to understand why.Whenever a procedure is called in .net it takes more time than when it is called subsequently.Even if a procedure is called after some interval it takes more time than it takes if it is called quite frequently. i am not asking about sql query or sql command. any user definded function or user defined method takes much more time to finish when it is called occasionaly. but when the same procedure is called quite often it finishes a lot faster. why?
View 1 RepliesI am currently building an ASPX webpage for internal use. Basically, there are two buttons on this page and I need each one to kick off a different stored procedure on our local SQLServer based on the needed task. these stored rocedures do quite a bit of work and take 3-5 minutes to finish running. In neither case do I need any kind of gridview or other output from these stored procedures, as they are simply crunching/cleaning data that will populate some tables that the user will then use to complete their task. There are also no inputs or parameters needed.
So i'm OK at ASPX and pretty good at SQL, but have no idea on the VB code behind page. This is what I have ben able to put together based on 3 days of googling. i think i am close but can't quite get across the line.
CODE:
I'm not sure if you need to see any of my ASPX or my SQL. both work fine on their own, but i am not able to get these buttons to work.
I have a stored procedure that when I run it within my application it times out, but when I use Management Studio and pass in the same exact parameters, the stored procedure executes under a second. I had this exact same issue with the same stored procedure before, and all I did was recompile it, and it fixed the problem, but I do not want to keep having to recompile this stored procedure every few days or so. Has anyone else ran into this issue before?
Another note I would like to mention, is that I'm currently working on a test database, so I'm not inserting, deleting or updating any of the records that the Stored Procedure is using. So the database itself is not changing, but for some reason the Stored Procedure is showing degradation, and at the most we have 2 users in the database at a time.
Below is the code I use to call the Stored Procedure from my app.
cmd.CommandText = "sp__RECAP_SELECTION_GET_GRID_RECORDS_RECAP_TYPES"
cmd.Parameters.Add("@FK_KitchenID", SqlDbType.SmallInt).Value = cmbKitchenCustomer.KitchenID_SelectedPrimaryKey
[Code]....
As I mentioned, if I run the Stored Procedure within Mangement Studio, it runs with no problems. Also if I recompile the stored procedure, it runs fine within the app, but after a few days, the stored procedure starts to timeout again within the app and I need to recompile it again.
I am pretty new to VB and I am not sure why this is not working, basically I am trying to run a stored procedure from my web code. The sp runs just fine in SQL, I've tried it several times so I am sure that is not the problem. I don't want to return any results, I just want to see an "ok" statement if it runs and an error message if it doesn't. The code I am using for the lables (warnings and confirmation) is reused from earlier on the same page, the same goes for the validations (valUpload).
[Code]...
I am using SSMS 2008 and VB. I'm a novice VB developer. I am trying to display results of a simple stored proc on my ASPX page. But I get the error below. Here is my code behind for the ASPX page:
>MsgBox(GlobalFunctions.GlobalF.GetDevSQLServerStoredProcedure())
And my code from GlobalF namespace:
Public Shared Function GetDevSQLServerStoredProcedure()
Dim conn As SQLConnection
Dim DSPageData As New System.Data.DataSet[code]....
Where can I find information on creating or how can I create a button to execute a store procedure
View 6 RepliesI am trying to get some data relevant to a stored procedure (or funtion) back from a database using .Net. The first thing I need to be able to do, is get the stored proc from the database and turn it into string format.The information I need is: The return set of columns, tables used within the SP, Stored Procedures called from the SP. The only way of doing this at the moment that i can think of, is though parsing the text and looking for keyword matches.
View 3 RepliesI am a newbie to vb.net and sql server. My responsibility is to build a vb.net function that when a scanner scans an object, it would take the scanned string and call a stored procedure to get a row of data that match that scanned string and pass the data row to an application that would print out a label.below is my vb.net and sql server stored procedure script
1. Do I have to come up with a public class in order to store my row of data to pass it on to a different vb.net application that would take that data row and print out a label?
2. In my stored procedure, how would I return the founded data row to the vb.net function?
Module makeLabel
Public Class AMGCdata
Public fileName As String[code]...........
im trying to search a value with the help of stored procedure But it is not working
Imports System.Data.SqlClient
Public Class frmStoredProcedure
Dim cn As SqlConnection
[code]....
I am calling this sub and it doesn't execute. The stored procedure is fine.
View 3 RepliesWhy I can NOT get the return value (Scope_Identity) by executing my own Stored procedure (SQL Server 2008) via this below code written in VB.NET 2008? The SP inserts the new record into Table1 but I have 0 as the return value!What's wrong with it?here is my vb.net code and my SP:
Public Function Insert(ByVal Obj As entity, connectionString As String) As Integer
Dim ScopeIdentity As Integer
Dim Connection As New SqlConnection(connectionString)
[code]....
Where in the body of a function do you code a stored proceedure? Does the storeProceedure "spInsertVendor" replace the sql commands? Here is my code:
Private Function AddVendor(ByVal vendor As Vendor) As Integer Implements VendorService.AddVendor
Dim connection As SqlConnection = PayablesConnectionFactory.GetConnection
Dim insertStatement As String _
= "INSERT Vendors " _
[Code]...
I'm having problems trying to create a new stored procedure.I am using sql 2005 express. I also have sql server management studio express installed.I open up the studio express and goto the database that i want to use to create the stored procedure. When I right click i see a sub menu, but don't see a option that says create stored procedure ( or any option that has anything to do with stored procedures ).Am I right in saying that I need the full version of visual studio to be able to work with and create new stored procedures.I am also told that sql server comes with built in stored procedures. Am i right in assuming that I can call these without having visual studio installed. And if the answer is yes, then how do I find out the name of these procedures, the parameters they use and what each particular stored procedure does.
View 3 RepliesVB code to use a dbo SQL stored procedure which allow the VB form to insert data into SQL dabase table?
View 2 RepliesDim parm1 As New SqlClient.SqlParameter("@Category_ID", txtCategory_ID.Text)
Dim parm2 As New SqlClient.SqlParameter("@Category", txtCategory.Text)
Dim parm3 As New SqlClient.SqlParameter("@Area_Name", txtAreaName.Text)
Dim cmd As New SqlClient.SqlCommand
cmd.CommandText = "dbo.udp_tblArea_ups"
[Code]...
i am using this code to insert data into my new table using a stored procedure now i want to delete data from the table using a delete stored procedure.
I've added few stored procedures to my SQL Server 2005 database. Few of them were a procedures containing SELECT statements and one of them contains INSERT statement. While executing the procedures with select statements are as easy as displying tables, the procedure with INSERT statement is not so easy [for me].At first, i've tried to add the procedure to the dataset and execute it as others, by filling the table adapter. But... there is now way to access the tableadapter within the code... VB does not recognise it! Just like it wasn't there! It's not even listed on with the other tableadapters below my project. It's viible only in the dataset!After few minutes i've removed the procedure from the dataset and tried to add it as a query. Everything seemed to be ok... but... after naming a function, that would execute the query.... the function is visible nowhere. I can't execute it within the code.
View 3 RepliesI have a stored procedure in SQL Server for generating transaction numbers.how to call the Stored Procedure from VB.NET and how will i get the value that is returned from the procedure into the front end.
View 3 Replies
