I've got a DateTimePicker control on my form. The normal behavior is for it to allow the user to "move" between value fields with the arrow keys and remember the last date part that was highlighted when the control loses focus. Then, when the control gets focus again, that date part is highlighted. We all know this, I'm sure.What I want to know is how to access the control's selection properties/methods in order to have my DateTimePicker control always highlight the month portion when a user enters the control, regardless of what the last date part highlighted was.
Actually, I want to be able to select a date (example, 2/10/2010-) and it add it to the textbox, then select another date(example,3/28/2010) from the same datetimepicker and it appends it to the textbox.(It will be like this on the final click, 2/10/2010-3/28/2010 and save it to the Access database).
When a user selects the datetimepicker, or types in the date in the text box, the calendar then highlights that date (for instance 02/02/2009) and puts the date in the text box.
If the user deletes the date from the textbox and then selects the drop down arrow again to show the calendar, the 02/02/2009 date is still highlighted. The user can select a different date or type in a date (including the highlighted one) - no problem. But if they wanted to select the same date they deleted, they cannot. No error message, it just leaves the text box blank.
Yes, it's very rare that that happens and they can highlight a different date, then go back in and highlight the 02/02/2009 date in a matter of two clicks but they want it fixed .
Not sure how I go about getting the calendar to clear the highlighted date once it has been deleted from the textbox?
I need this for displaying in my crystal report here's my
cmd.CommandText = "Select * from pos where date= '" & datetimepicker1.text"'"
and nothing displays on my crystal report, I need the right query for that...the field value is DATE...I need the conversion for the 1/11/2001 format from date time picker to 2001-1-11 in DATE field
I have on my form a ListView Control and a DateTimePicker control. I want when I select the specified date from DateTimePicker to be added what I select in first line of ListView. Then I select the second date from DateTimePicker and adds that as a second item of listview. How can I achieve that? [Code]
been a long time since i came to the forum. i use to program a lot in vb6 but its been a long time since i did it so im really rusty. now that im trying to get back to programming, im finding it a bit of a challenge in vb2008... i have this question, im using a datetimepicker control to select dates in a calendar. what im trying to do is disable the textbox in the datetimepicker so that the user can only use the drop down calendar to select the date and not enter the date manually! does any one knows how to disable the textbox in the datetimepicker but still be able to select a date from the calendar???
I have a DateTimePicker for a product that has been dispatched to the customer.I would like to select the day with the datetimepicker and add to a textbox a 30 day warranty. I want another textbox to automatically insert and display the date that the warranty would expire.
designing an inventory system and i want to generate crystal reports from sql queries.Actually want to generate monthly and yearly reports from the daily sales reports i have populated
I need this for displaying in my crystal report here's my code:
Code: cmd.CommandText = "Select * from pos where date= '" & datetimepicker1.text"'" and nothing displays on my crystal report, I need the right query for that...the field value is DATE...I need the conversion for the 1/11/2001 format from date time picker to 2001-1-11 in DATE field
I have a datetime picker which format is yyyy-MM(2011-09) and I need to choose all the records of a particular month, I use this like query but doesn't display anything
HI have a small problem that i cant figure out. i have a program that i want when a user select a date from a datetimepicker, it filters evrything from the datagridview that are for that date..Hare is the code i have
Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click Dim oledb As System.Data.OleDb.OleDbConnection
I have two datetimepicker-"OpeningDate" and "ClosingingDate"I need to add a condition such that before entering data in the database it is checked that the "ClosingDate" is always greater than the "OpeningDate"If not then an msgbox will be displayed "Enter the correct data"
I support a desktop application containing datetimepicker components.A child form loads within an MDIcontainer, updating components from data retrieved from a SQL table, allowing users to make modifications. A text component hides the current form and displays another form.When the user returns from the other form, one of the datetimepicker component is unchecked and the date is set to the current date. Tracing through this application, I do not hit any code that resets this component.Other datetimepickers located in my current form are not affected.I'm providing the routine used to display another form, and the routine used to return to the current form.
Private Sub txtPubNo_DoubleClick(ByVal sender As Object, ByVal e As System.EventArgs) Handles txtPubNo.DoubleClick Me.Hide() SetCalledFromAForm = True
IT STILL GIVES A MSGBOX IF I SELECT THE CHECKBOX BOX OR NOT ....My code below will redirect to Google in both conditions: If the user selects the checkbox, then it will redirect to www.google.com, but if a user forgets to check the checkbox then it shows the msg box with an ok button. When I click on ok it should redirect to www.google.com
I want When a user forgets to check any of the checkboxes to show a msgbox with an ok button and stay on the same page. Otherwise if user selects any of the checkboxes then redirect to google
The VB.Net 2005 datetimepicker control allows the user to use the arrow keys as follows:up arrow increases the value (day or month or year)down arrow decreases the value (day or month or year) left arrow goes to the previous section (day or month or year) of the controlright arrow goes to the next section (day or month or year) of the control My users do not like using the arrows and want to enter enter the date (e.g. 9/8/2009) as follows when the field has focus:9 (press tab) 8 (press tab) 2009 (press tab) (goes to next control) They do not like 9 (press right arrow) 8 (press right arrow) 2009 (press tab) (goes to next control) Is it possible to use the tab key in lieu of the left/right arrows? If the user is in the last section of the datetimepicker field (e.g. in the yyyy section of a mm/dd/yyyy control), how will the tab set focus to the next control?
I have a column ("tblSupply.Date1") in my table populated with dates. If I have value in this column there is no problem, dateTimePicker1 goes to this date. If I have this field empty, I get an error: "Object cannot be cast from DBNull to other types" when I try to open form where dateTimePicker1 is.
the DateTimePicker in my form appears like this:Attachment 72262 I want to give it an appearence like this.Attachment 72263 i.e,only the date will be displayed in the format of DD/MM/YR
I Want To Insert Date Into Sql 2005 But Without Using Datetimepicker In Vb Net 2005 forms every time i do it by using textbox got an erro converting iwant to use textbox like we use it in access with input mask is that avilable
OK, before I throw my laptop out the window... I need to insert data into my Access Database from my VB.Net2005 application. I have written and re-written this code, trying everything I can find from the web and I've had no luck. I'm getting a {"Data type mismatch in criteria expression."} error on the ExecuteNonQuery line - I'm fairly certain that it's the DateTimePickers, as I rem them out and the code works fine. However, I've tried everything - changed the column in my database to Text, changed the .Value to .Text, .Value.ToLongDateString, and every time I'm getting the same error. One of the things I read on line was that I need to use parameters in order to pass the DateTime - I need to pass the Date and Time (date format is not important, but I require the hh:mm:ss format for the time). The fields currently default to the current date/time which is perfect, but I read that depending on how you pass the data, you may run into problems if the user does not pick the drop box (leaving it as the default).
I'm looking for a way to cut out unneeded text from a string. The remains of the string should be "Result: Sucesfull".
Example strings:
[Download Report] 26 october 2009 Result: Succesfull
[Code]....
As you can see the string in my first example contains 3 lines, and the second example contains 5 lines. In my application they differ depending on the situation. I want to cut out all lines, except for the line starting with 'Result:', which I want to display to the user of the application.
problem 1: By default the textbox property of textbox is empty and if we want to show something so we change the text property of text box. right. Similarly is it possible for datetimepicker? i mean that date is always appear in datetimepicker both at run time and at design time, but i want that when my form is loaded so datetimepicker appears clear just like textbox is empty, and when i select some date then that date is display.
I have two datetime pickers that when changed call a function that validates the two dates and changes them as needed. This currently causes a loop where the function changes the dates on the datetime pickers that triggers the function again...
So I would like to disable the datetime pickers valuechagned function while the function runs then re-enable it after it makes the required changes.
Private Sub dtpStartDate_ValueChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles dtpStartDate.ValueChanged subValidateDate()
I have posted about receiving email before and this is a follow up of my progress. I have only one form and it consists of 2 buttons, one for downloading messages from the server, the other, to disconnect the connection. I also have one listview and one textbox to display the message. I took the codes from a few open source programming website and compiled them. My program works as such that upon clicking the 'Download Messages' button, a message box will pop up and the user/admin will be asked to enter the POP3 account name. My doubts are I am not sure what POP3 account name to put in.
i m inserting time from listview into sql database 2005.....but it results inserting both date and time part as well..but i want to insert only the time part.