I added a query. FillByDate using Table Adapter which takes a date as input from the code.The query I have set is the following:
SELECT YMD, AIR_TEMP_AVG, AIR_TEMP_MIN, AIR_TEMP_MAX
FROM mytable
WHERE (YMD = :PARAM)
[code].....
From Previous Forum Post: Table Adapter Parameterized Query.I added a query. FillByDate using Table Adapter which takes a date as input from the code. The query I have set is the following: [code] lastdate (string object) is a date (inside double quote) provided in the code. The code does not generate error but I get a screen which asks the date as input despite the fact that it has already been provided in the code. [code]
View 2 RepliesI am using following code for Insert records from LIstview to table in MsAccess:
[Code]...
As you may have seen in my other post, I have to switch over an all text SQL statement based database interaction program to using parameterized queries instead.I remember doing it this way in college but I don't seem to be able to recall one part of it. The program I wrote back then and some code samples here both point to doing the code as I did so far:
m_strSQL = "UPDATE [OWNER DATA] SET [FIRST NAME] = @strFName"
m_strSQL &= ",[LAST NAME] = @strLName"
Dim upCMD As New OleDb.OleDbCommand(m_strSQL, m_Connection)
upCMD.Parameters.Add("@strFName", OleDb.OleDbType.Char, 30, "[First Name]")
[Code]...
it ran the SQL statement and that's that. Can I just do that with a parameterized query too without using the adapter.update()? And for bonus points, why the heck did I use that command in my old college program cuz I sure don't know?
I'm adding queries to a wizard generated Table Adapter with WHERE condition that involes the "%" wildcard:
SELECT * FROM Customers WHERE Country = @Country AND CustomerID LIKE @CustomerID
--If I add % after @CustomerID, I get an error message that the --query can't be parsed but if I run the query as above it returns all --the rolls irrespective the value I supplied for the CustomerID column.Only performance counts!
Using VS-2008, VB and SQL 2005 Developer:
I'm using Queries within the TableAdapter to grab certain data record field validations, most of them are using the Scalar Query to see if a certain condition returns a record or not.
I have one check I need to do that SUMs three fields and have tried it with both a Scalar and Regular Select, both return the results fine, my problem is creating the right syntax in the VB code to check the returned values.
Here's the Query Code in the Adapter (called GetInvoiceSum) and I pass it the cJobNum
SELECT sum(taxable) as taxable, sum(material+labor) AS subtotal, sum(tax) AS tax from ticket where jobnum = @cJobnum Here is the Code in the VB app - it gives me errors on the declaration and I've tried various types DataRow, DataSet, etc....not sure what I'm missing here and am very new at this....
Dim nSumTicket As DataSet = Me.TicketTableAdapter.GetInvoiceSum(cJobnum)
I have the following query that executes when my form loads. It's the rowsource for my combo box. The query is fine and populates the combo perfect, however, when i click into the combo box I cannot click out of it or even close the form. I have tried taking out the line of code that fills the form via table adapter on load and it works fine (opening the form unbound by the main table). Has anyone run into this before? I have another combo box on the form setup the exact same way and this is not happening. I've experimented with different datatypes etc....
code to populate combo box:
Public Shared Function LoadCallSource() As String
Dim sConnectionString As String = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=C:Documents and Settingsdiw07My DocumentsDaily Backupsphone memo backend.mdb"
[code]....
If I take out the line
Me.MemoTableAdapter.Fill(Me.Table_Memo.Tables("Memo"), intMemoID)
The Combo boxes do not act up or "Lock"
I created a new query in the dataset designer. There are now 2 queries there. The original one and the new one.I also added named parameters in the Where clause of the 2nd query.This is the query in the new one:
SELECT ID, FatherName, MotherName, EmergencyContactName,
EmergencyContactRelationship, Address1, Address2, City, State, Zip,
PrimaryPhone, SecondaryPhone, Emaile.
[code].....
I copy/paste one datagridview from one form to another (different solutions) using two instances of VS 2005.The target form has the datagridview with all settings, including the DataSet and tableAdapter used by the original form. The datagridview also has all old settings. Everything is fine, it works as expected, with one drawback: every time I make any change in the target form surface, VS tells me that the dataset and the tableadapter are not defined and no longer loads the form in design mode giving errors mention that the dataset and the tableadapter are not defined.To be able to view the form surface in Design Mode, I have to edit the form.Designer.vb file and replace the references to the dataset and tableadapter as follows
View 1 RepliesI have created a parameterized query in my tableadapter. Here is the SQL:
SELECT CalcinerID, Comments, CorrectiveActions, CrucibleOxideWt, CrucibleWeight, DCPressure, DCTemperature,
Date, DischargePressure, FeedPressure, FiredCrucibleOxideWt, GmSampleWt, LIMSNumber, LotNumber, MaterialType,
OperatorID, QualLabOperator, QualLabTimeStamp, RecordID, ToteBinNumber [code]....
When I use the Execute Query button in the Tableadapter Query Builder, the query works fine; I get all the rows I expect. However, when I run this in my code, the query behaves like an equality statement (i.e. Lotnumber = @Lotnumber) rather than a LIKE statement (Lotnumber LIKE '%' + @Lotnumber + '%').Here is the code that is not behaving correctly. Note that I have a textbox, LotSearchTextbox, where I enter the portion of the Lotnumber that I want to use as the filter. I also have a button, LotSearchButton:
Private Sub LotSearchButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LotSearchButton.Click
Try
Dim SomeNumber As Integer = Me.LotCalcinerO2TableAdapter.FillByLotNumber(Me.CalcinerDBDataSet.LotCalcinerO2,[code].....
why the query works in the Query Builder but not in the code?
I've recently been trying to figure out a way to get parameterized queries to work and i think i'm almost there but seem to be getting an error when executing my query
Here's the code
[code]...
In my project I need to log all queries executed against my database. As an example we can use the staff user data here. In that class I have a function generating the command with the parameters as follows:
[Code]...
[Code]...
What am I doing wrong? BTW, I know nchar(10) is not a good choice for first and last name.
statement = "SELECT OrderID, (SELECT VendName FROM Vendors WHERE Vendors.VendorID = Orders.VendorID) " &
",OrderDt, RcvdDt, OrderTotal " &
"FROM Orders " &
"WHERE VendName=? " &
"ORDER BY OrderDt DESC"
Dim cmd As New OleDbCommand(statement, connection)
cmd.Parameters.AddWithValue("VendName", txtVendorFilter.Text)
Dim reader As OleDbDataReader = cmd.ExecuteReader(CommandBehavior.Default)
I was trying to do this before by simply concatenating the textbox value right into the SQL and I was getting a "No values given for required parameters", and read that that I should use parameterized queries instead. So I tried this and it doesn't give me any errors, but the reader never has anything in it. I've never used parameterized queries before, so I'm a bit lost as to why this isn't working. I've changed the above code to account for OLEDB from what I briefly read on how it should work, and it's giving me the "no values given for required parameters" again.
I keep getting this error :
The parameterized query '(@AdminEmail nvarchar(4000),@AdminPassword
nvarchar(4000))SELECT' expects the parameter '@AdminEmail', which was
not supplied.
[code].....
How do I make a parameterized query in the database with VB.NET? remember to mark the replies Welcome to the All-In-One Code Framework! If you have any feedback,
View 1 RepliesI solved this issue in this thread but there still are issues with special chars. ie 'I thought by doing parameters that it would take care of any special chars for you. Well i am still getting mysql exceptions about syntax. I look at the string it is working with and it has a "'" in it.Why are they not working as I expect them to?
View 7 RepliesI have a data table whose one column is related to a column of another table. I have a listbox in a form which shows a column (which is sorted by another column value by ORDER clause) of the parent table and other columns are in textboxes. The child table is represented by a datagrid. When I add a new item in parent table and click save, the newly created item is listed at the bottom of the listbox violating my ORDER clause. When I wrote some codes to fill data again after updating, it shows an error message[code]...
View 3 RepliesTrying to do a mysql parametrized query and i'm having a little issue.
cmd = conn.CreateCommand
cmd.CommandText = "insert into `rootforest` (rootforestname, BusinessName) VALUES (?rfname, ?bname)"
[Code]....
It errors on the executenonquery. Says the column rootforestname can not be null. i don't under stand why it does not fill in the value in the command text.
im having a problem with my code Private Sub TextBox2_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox2.TextChanged
[Code]...
once i typed in the string in the textbox to search for an item i get this error The parameterized query '(@Parameter1 nvarchar(4000))SELECT * FROM borrow where (Departme' expects the parameter '@Parameter1', which was not supplied.""
I wrote this little function to allow me to pass an ArrayList of Strings and then based on the table passed to pre-build a SQLCommand like so
INSERT INTO table` (`column`,`column`) VALUES (`value1`,`value2`);
The function for this is here:
Public Function _SQLInsertBuilder(ByVal values As ArrayList, ByVal Table As String) As String
Dim commandString As String
Dim columns As ArrayList = GetTables(Table)
commandString = "INSERT INTO `" & Table & "` ("
For Each column As String In columns
[Code] .....
Now I know that much like mysql_real_escape_string() VB.NET has a Parameter ability to make querys safer. How could I parameterize the values during the build of the string.
[code]Myself and a coworker have stared at this quite a lot and we can't figure out why it's not working. The problem is in the value for @ID (since it still works when I leave the other one parameterized). The funny thing is, Just a few lines of code above it I have a different query that sets a parameterized value for the same ID, using the the same choices list that the For Each loop is getting the match variable from.Choices is a list of longs, and when I use choices(0) to parameterize ID in a query, it works. But now down here in this loop I have the new match long, and it doesn't want to make it work for me.
View 1 RepliesI'm getting the error: The parameterized query(@CustomerID, @ProductCode, @DateOpened) expects the parameter @ProductCode, which was not supplied.For one thing, my INSERT query has five parameters, not just the three listed in the error notice.
Another thing, I supplied @ProductCode in the AddWithValue statement.
Another thing is that I don't get the error when I change:
InsertCommand.Parameters.AddWithValue("@DateOpened", Date.Today.Date)
[code].....
I have this code to edit the datarow of my table adapter but t doesnt update the table. I think i have a missing code that's why but i cant figured it out. by the way im using vb2008 and SQL as my database. [code]
View 3 RepliesI added a table to my Access database. I added that table to my dataset. Using Database Designer VB Studio, my table and tableadapter show up in the design view. The class definition is in the datasetdesigner.vb, and it shows in the object browser. But, I can't reference it in code. I am a newby and obviously missing somethning.
View 1 RepliesI have created a DataSet.Within the dataset I have 2 DataTables.I have created a DataSet.Relations between the two tables.Now, using DataSet.DataTables.Select.... Would it be possible to perform a search similar to this in SQL?
SELECT * FROM DataTable1
INNER JOIN DataTable2
ON DataTable1.KeyColumn= DataTable2.KeyColumn
[code].....
I am trying to "make table" query. Below is my texT
[Code]...
I have a form that fills a table adapter with this:
Me.Scratchpad3TableAdapter.Fill(Me.MDRDataSet.scra tchpad3
and what I'd like to do is when users edit something on this form that they post the changes to a table called exceptionsedit which is not part of that dataset. What I don't know how to do is to how to insert those edits to the exceptionsedit table.
To get an id value after a table insert into an Access database you do a SELECT @@IDENTITY. I would like to know if this will work if your INSERT query is a table adapter query? I created an INSERT query for a table in the dataset designer which is working. My concern is that if I make another query with SELECT @@IDENTITY it won't work because table adapters make a new connection each time. Can someone clear me up on this?
View 5 RepliesI have several labels that bind to my query adapter and I need to update (not TO the database but FROM the database) as data changes on database by another application.I only need to either check data on my database that changed or reload the data.I'm using data set, table adapters and tableadapter.queryadapter to query data (tantalization) from my database.all I want is to refresh/ update this values on my controls in my windows form I'm using VB.NET on VS2010.
View 12 Replies
