I've recently been trying to figure out a way to get parameterized queries to work and i think i'm almost there but seem to be getting an error when executing my query
Here's the code
[code]...
[Code]...
What am I doing wrong? BTW, I know nchar(10) is not a good choice for first and last name.
I have created a parameterized query in my tableadapter. Here is the SQL:
SELECT CalcinerID, Comments, CorrectiveActions, CrucibleOxideWt, CrucibleWeight, DCPressure, DCTemperature,
Date, DischargePressure, FeedPressure, FiredCrucibleOxideWt, GmSampleWt, LIMSNumber, LotNumber, MaterialType,
OperatorID, QualLabOperator, QualLabTimeStamp, RecordID, ToteBinNumber [code]....
When I use the Execute Query button in the Tableadapter Query Builder, the query works fine; I get all the rows I expect. However, when I run this in my code, the query behaves like an equality statement (i.e. Lotnumber = @Lotnumber) rather than a LIKE statement (Lotnumber LIKE '%' + @Lotnumber + '%').Here is the code that is not behaving correctly. Note that I have a textbox, LotSearchTextbox, where I enter the portion of the Lotnumber that I want to use as the filter. I also have a button, LotSearchButton:
Private Sub LotSearchButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles LotSearchButton.Click
Try
Dim SomeNumber As Integer = Me.LotCalcinerO2TableAdapter.FillByLotNumber(Me.CalcinerDBDataSet.LotCalcinerO2,[code].....
why the query works in the Query Builder but not in the code?
I'm getting the error: The parameterized query(@CustomerID, @ProductCode, @DateOpened) expects the parameter @ProductCode, which was not supplied.For one thing, my INSERT query has five parameters, not just the three listed in the error notice.
Another thing, I supplied @ProductCode in the AddWithValue statement.
Another thing is that I don't get the error when I change:
InsertCommand.Parameters.AddWithValue("@DateOpened", Date.Today.Date)
[code].....
i am using vb.net 2008 and msaccess i have given the following query to fill a dataset but it is giving me an error. mCmd = " SELECT OfficialInfo.*, "
[Code]...
In my project I need to log all queries executed against my database. As an example we can use the staff user data here. In that class I have a function generating the command with the parameters as follows:
[Code]...
statement = "SELECT OrderID, (SELECT VendName FROM Vendors WHERE Vendors.VendorID = Orders.VendorID) " &
",OrderDt, RcvdDt, OrderTotal " &
"FROM Orders " &
"WHERE VendName=? " &
"ORDER BY OrderDt DESC"
Dim cmd As New OleDbCommand(statement, connection)
cmd.Parameters.AddWithValue("VendName", txtVendorFilter.Text)
Dim reader As OleDbDataReader = cmd.ExecuteReader(CommandBehavior.Default)
I was trying to do this before by simply concatenating the textbox value right into the SQL and I was getting a "No values given for required parameters", and read that that I should use parameterized queries instead. So I tried this and it doesn't give me any errors, but the reader never has anything in it. I've never used parameterized queries before, so I'm a bit lost as to why this isn't working. I've changed the above code to account for OLEDB from what I briefly read on how it should work, and it's giving me the "no values given for required parameters" again.
I keep getting this error :
The parameterized query '(@AdminEmail nvarchar(4000),@AdminPassword
nvarchar(4000))SELECT' expects the parameter '@AdminEmail', which was
not supplied.
[code].....
How do I make a parameterized query in the database with VB.NET? remember to mark the replies Welcome to the All-In-One Code Framework! If you have any feedback,
View 1 RepliesI solved this issue in this thread but there still are issues with special chars. ie 'I thought by doing parameters that it would take care of any special chars for you. Well i am still getting mysql exceptions about syntax. I look at the string it is working with and it has a "'" in it.Why are they not working as I expect them to?
View 7 RepliesAs you may have seen in my other post, I have to switch over an all text SQL statement based database interaction program to using parameterized queries instead.I remember doing it this way in college but I don't seem to be able to recall one part of it. The program I wrote back then and some code samples here both point to doing the code as I did so far:
m_strSQL = "UPDATE [OWNER DATA] SET [FIRST NAME] = @strFName"
m_strSQL &= ",[LAST NAME] = @strLName"
Dim upCMD As New OleDb.OleDbCommand(m_strSQL, m_Connection)
upCMD.Parameters.Add("@strFName", OleDb.OleDbType.Char, 30, "[First Name]")
[Code]...
it ran the SQL statement and that's that. Can I just do that with a parameterized query too without using the adapter.update()? And for bonus points, why the heck did I use that command in my old college program cuz I sure don't know?
When Creating a query using the sear Criteria Builder . I keep getting the error : "The schema returned by the new query differs from the base query" what does that mean and how do i avoid this problem in future
View 2 RepliesTrying to do a mysql parametrized query and i'm having a little issue.
cmd = conn.CreateCommand
cmd.CommandText = "insert into `rootforest` (rootforestname, BusinessName) VALUES (?rfname, ?bname)"
[Code]....
It errors on the executenonquery. Says the column rootforestname can not be null. i don't under stand why it does not fill in the value in the command text.
im having a problem with my code Private Sub TextBox2_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TextBox2.TextChanged
[Code]...
once i typed in the string in the textbox to search for an item i get this error The parameterized query '(@Parameter1 nvarchar(4000))SELECT * FROM borrow where (Departme' expects the parameter '@Parameter1', which was not supplied.""
I added a query. FillByDate using Table Adapter which takes a date as input from the code.The query I have set is the following:
SELECT YMD, AIR_TEMP_AVG, AIR_TEMP_MIN, AIR_TEMP_MAX
FROM mytable
WHERE (YMD = :PARAM)
[code].....
I wrote this little function to allow me to pass an ArrayList of Strings and then based on the table passed to pre-build a SQLCommand like so
INSERT INTO table` (`column`,`column`) VALUES (`value1`,`value2`);
The function for this is here:
Public Function _SQLInsertBuilder(ByVal values As ArrayList, ByVal Table As String) As String
Dim commandString As String
Dim columns As ArrayList = GetTables(Table)
commandString = "INSERT INTO `" & Table & "` ("
For Each column As String In columns
[Code] .....
Now I know that much like mysql_real_escape_string() VB.NET has a Parameter ability to make querys safer. How could I parameterize the values during the build of the string.
[code]Myself and a coworker have stared at this quite a lot and we can't figure out why it's not working. The problem is in the value for @ID (since it still works when I leave the other one parameterized). The funny thing is, Just a few lines of code above it I have a different query that sets a parameterized value for the same ID, using the the same choices list that the For Each loop is getting the match variable from.Choices is a list of longs, and when I use choices(0) to parameterize ID in a query, it works. But now down here in this loop I have the new match long, and it doesn't want to make it work for me.
View 1 RepliesI am using following code for Insert records from LIstview to table in MsAccess:
[Code]...
The database:
"ID (Primary key)" | "Title"
0 | "title1"
[code].....
OK, before adding values to database, we should check if a row exists with this values :)TO do this, creating a Stored Procedure is a best way to deal with the database fastly.So... The problem now is, at the runtime, Miss OleDB throw this error:Microsoft Jet database engine cannot find the input table or query 'IF
i should say hi experts :D . Help me with this pretty code :)
The database:
"ID (Primary key)" | "Title"
0 | "title1"
[code].....
OK, before adding values to database, we should check if a row exists with this values :)TO do this, creating a Stored Procedure is a best way to deal with the database fastly.So... The problem now is, at the runtime, Miss OleDB throw this error:Microsoft Jet database engine cannot find the input table or query 'IF
I have 7 company Divisions that sit in an access database.I then use this list to populate two comboboxes in my windows form.However I get a syntax error in my SQL Query if the Division name is more than one word.For example in my access database I have two columns one is a status column and the other is a division column. If for example the Division is called 'Corporate' the status column is called 'Status Corporate' and the division column is called 'Corporate'.The SQL query works fine in this scenario.However if I have a Division that is more than one word, lets say 'Operations Division' I get an error in my SQL Query that says -
Quote: Syntax error (missing operator) in query expression 'Operations Division'.Here is my code
sqlNewTenderDetails = "SELECT " & Me.DivisionBox.SelectedValue & " From BidRefCodes Where " & "[Status " & Me.DivisionBox.SelectedValue & "='Active'"
daNewTenderDetails = New OleDb.OleDbDataAdapter(sqlNewTenderDetails, NewTenderDetailsTableCon)[code]....
I`m now at the point calling server from vb.net, and run query inside vb.net code.I have write two codes on button click. One button is checked server connection, other should execute query for server table.Connection code is working, as I have set two messages, and getting successfull message. Second code is not working, as nothing happened when press button. Sql statement is very simple, and it works if I run it manually.[code]
View 19 Replies'Initialize The Database Connection'
Dim dbTRCoreDatabase As New TRCoreDatabase
'Query For Get The Employee ID'
Dim listEmployeeID As IQueryable(Of Long) = (From EmpMaster In dbTRCoreDatabase.EmployeeMasters Where EmpMaster.Email = [code]....
I have a string qText with the text of a query in it, say qText = "select * from Data". how can I execute it to fill a TableAdapter I have in my form with the resulting data?
View 2 RepliesImports System.Data
Imports System.Data.SqlClient
Imports System.Configuration
[code].....
What's wrong with my code, the query seems to be fine, I tried executing it on phpmyadmin.
CODE:
I got this error: ERROR [42000] [MySQL][ODBC 5.1 Driver][mysqld-5.1.36-community-log]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '' at line 1
I am writing a program that has a listbox which is bound to a dataset. When I click a button (e.g. delete) the item is deleted from the database ok using an SQL query but is still shown in the listbox. How do I get the listbox to refresh/update its display?
View 8 RepliesHere is the code:
Function getData(ByVal id As String)
Dim reader As SqlClient.SqlDataReader
Dim statement As String
[code].....
Ok I'm creating a sql query with a string variable and executing it in vb. The string would look something like: Insert Into Table (vara,varb,varc) Values ('vara','varb','varc') This works fine.
[Code]...
I have two module-level variables and Linq query. I want the results of the Let clause to change the global variables - is this possible?
For example:
Dim X As Integer = 0
Dim Y As Integer = 0
[code].....
