I want to ask how add crossButton image to TabPage as in IE..To add left hand side image..I assign the imagelist property if tabcontrol to imagelistNAme & then slect the tabPage & change the imageIndex.I want to ask how to add Right Handi Side Cross Button Iamge & if we click on it,tab is close.
View 2 RepliesI want to ask how add crossButton image to TabPage as in IE..To add left hand side image..I assign the imagelist property if tabcontrol to imagelistNAme & then slect the tabPage & change the imageIndex.I want to ask how to add Right Handi Side Cross Button Iamge & if we click on it,tab is close.
View 1 RepliesI want to add cross button image on the right hand side of tabPage. I m creating tabpages at Runtime.Mine code is added image to the left...I want to add it to the right....I m also adding text to the tabPage...
& second Probs is dat..On button click suppose i add the first tab Page,Image is aded to the first Tab Page...When i click on button to create the second Tab,Image & text of First Tab Page is clear & so on..
[Code]...
How To Put An Image Beside The TabPage's Text Just Like a Favicon in Browser ?
View 2 RepliesI want to add cross button image on the right hand side of tabPage.I m creating tabpages at Runtime.Mine code is added image to the left...I want to add it to the right....I m also adding text to the tabPage.& second Probs is dat..On button click suppose i add the first tab Page,Image is aded to the first Tab Page...When i click on button to create the second Tab,Image & text of First Tab Page is clear & so on.
[Code]...
I have placed an tabcontrol with two tabs. the first tab contains an textbox (textbox1) and the second tab contains another textbox (textbox2).
View 3 RepliesI am trying to display an usercontrol(has several panels one on top of the other panel) on tabpage. I am using below code to achieve this.
[Code]...
I am using System.Windows.Forms.TabPage to store an entire TabPage for later use in My.Settings. Here is a brief description of the application.
I have a TabControl that has 3 tabs. One for user input, another tab for equipment settings, and then a final tab for Oven settings. On the user input tab, if the user de-selects the checkbox for Oven, the oven tab is saved to My.Settings and hidden.
I can then run the application without oven control. After running, lets say the user would like to re-run, this time with the oven. They go back to the input tab and re-select the Oven checkbox. However, the Oven tab doesn't re-appear. When stepping through the code, the is nothing stored in My.Settings for the oven tab page. Why not?
Also, I can open the application, and check, then uncheck the oven checkbox and the tab is hidden, then returns. I can do this all day. However, after running the tab will not return.
I would want it that upon pressing the Tab key in the last control of the TabPage then it will go to the next tabpage and focus on the first control there that has its TabStop set to true. I could trap the Tab key in my current implementation but is there be an easier way?
View 13 RepliesI Try so many times to change TabPage Size and Form Size when I shif from One TabPAge to another, This because every TabPAge consist of defrent volume of control which need to enlarge and reduce the size. But I couldn't make it.
View 2 RepliesI've been searching for hours tonight searching existing posts, other websites and all i can find are examples of how to capture a image from a webcam.Does anyone have any code that simple talks to the camera device via WIA, and then saves every image found on the device to a hard drive?I found this code below. Credit i cant tell you as i have a bunch of different flavors of code, but this only saves the file as a tmp file, and not the actual image file i expected after selecting?
Imports System.Drawing
Imports System.Runtime.InteropServices
Imports WIALib
[code].....
winforms .net 3.5 Ultrawingrid 9.2 In my subclass of Ultrawingrid.Ultragrid :
[Code]...
This works fine. But when the grid is dropped on a TabControl tabpage, the ctrl-tab looks very different to the sub above. e.keycode is seen as controlkey {17} I realize that by default cntrl-Tab moves between tabpages. I need to override this behavior. My thought is I probably need a subclass of the tabControl which will pass the keycombo through just as the form does but I confess to being clueless as to how to accomplish that. I tried to override the onkeydown of a tabcontrol subclass and just issuing a return and not and base call to onkeydown if the ctrl-tab combo was pressed but it seemed to see the e.keycode as controlkey as well.
[Code]...
I use some code to successfully resize and save images - but I want to save the image to 800x800 px size on a canvas of 900x900px so it has a white border type thing around it.
View 8 RepliesI want to display an image in a datagridview,but i have no idea of doing the same.Is there any code bank submission regarding this topic or some ideas how to go for this?
View 3 RepliesI want to get image from the file..I m able to do it....But mine code do not close the file,after getting the image,I want to close the file.Cz after getting the image,I want to delete that file.....on Deleteing error is dere file is user by another process...
Public Sub GetImagesContent(ByVal sFileName As String)
Try
Dim sExtension As String
[code].....
The program i am trying to build populates a series of textboxes from a csv datafile and picturebox upon text change.The problem I ran into is that if there is no picture for a particular record the rest of the record doesnt populate into the textboxes
My thought, and perhaps someone has a better idea on how to handle this behavior is to have a default image loaded in the event, no image was present.
[Code]...
If this is a good way to handel the behavior then my question is where would the default image be stored? The program would have to be compiled with the default image? I have yet to compile a program before, getting close though
At first glance this might looks repeated-old problem but my problem might differs a little from others
i want to create a desktop program to add images to a database (microsoft access 2003)
but the problem is no matter how i tried i can't do it.i have searched the internet[code]....
I've developed an application that acquires images from my Logitech QuickCam Pro 9000 using WIA. The problem is that I cannot figure out how to adjust the quality of the image taken by the camera. The camera has a 2MP lense, but the program will only acquire a picture of 320x240 pixels, which is the lowest resolution the camera has. How do I tell the camera to take a picture at one of it's other resolutions? IE: 640x480, 960x720, 1.3MP, or 2MP?
[Code].....
i have loaded an image to picturebox from resource which can be any size,but i just want that a image i have loaded to my picturebox,image resolution is 48*48,than now how i can set image size in picturebox.
View 4 Repliesi have been in state of hectic for the last 2 days making lot of research and finally made this code worked it for me. My problem is that, how can i make this code retrieve the image from sql server database...use picturebox to load it in the vb.net program.
Dim myfilelocation
As
String =
"C:myPicturesmyimage.png"
[code]....
Is it also possible to change the location of image where its getting the image. i mean, i would like to tell other computers to get their images from anywhere as long as it brings images to my server.i mean, say that comp1 which is connected to my database server for storing and retreiving information, gets his image from his location then the application sends the image to my server...the application retreives the image from the server..as simple as that.
I have a table in SQL Server with a field defined as Varbinary (MAX). In VB I am trying to save an image to the table. The file I'm using is 139kB in size and I get no errors but when I look at the record, the Attachment column where my image stream should be is empty. The rest of the information is saved. I checked the buffer and it grabs the correct size of the file (141475) so I'm very sure it's found and loaded the image.
Could the parameter from the SQL not be passing the binary value to the parameter properly?
[Code]...
How to use VB.NET 2005 for image processing?
View 5 RepliesI am trying to save a pic from my picturebox. I copy an image and paste it into the picturebox. I would like to save the image that I have pasted to a file.
View 3 Repliesi am creating a winform program using vb where i am loading an image into a picture box. then in the mouse down event i am creating small circles which can act as points which will be displayed on the image. say creating five points around the eye of a bird. then i am having a button by clicking it , a polygon will be drawn on those selected circles x and y as edges. i am having no issues until this. when i am trying to add another polygon in the same picture by clicking around its leg or whatever and pushed the draw button there must be another polygon i.e. two separate polygons 1 on eye and 2 on leg. but there is only one polygon from eye to leg. so my questions are
1) how to close a polygon and draw another one in picture box
2) how to select a previously drawn polygon and delete it.
picturebox_mousedown
Private Sub PictureBox1_MouseDown(ByVal sender As Object, ByVal e As System.Windows.Forms.MouseEventArgs) Handles PictureBox1.MouseDown
[code].....
I want to save picture in app.config file,first time when i start my application picture will come from database then all the time it will come from the app.config file.I also update app.config file from front end with two fields user name and user picture
View 3 RepliesI have loaded a picture in PICTUREBOX1 by this command Me.PictureBox1.Image = Drawing.Image.FromFile("D:C2007BITMAPSpict.jpg")
How to store this picture SQL server 2005 table1's IMAGE column?
I do not want to store image path in table. I want to store picture in image column in any format.
Reason: If I run my project to some other computer that has not images'path stored in database.Then images will be displayed by image field of database.
Can anyone shed some light on the usage: pdfbox.PDFToImage I want to convert a PDF to an image to dispalay in my app. I then want to add some items with GDI+ and then print the image.
View 2 RepliesI am reading a word document that has a table in it and one of the cells as a image in it. How can I get that image and insert it into a picturebox control>
View 3 RepliesWhen I resize my Image it become's more blurred...Like for example, when I resize it larger....It blur's and when I reduce the size to it's original size it just blurred more...in short every time I change the Size of the image it becomes more blurred.
Dim w, h As Integer
Private Sub BtnLarger_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
[code].....
I have the code below and would like to sharpen the image in the increments of 10% starting at 0% to 100%. How do i apply separate filters so that when i move the track bar, i am able to see the effects take place step by step?
Private Sub TrackBar1_Scroll(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles TrackBar1.Scroll
Dim sharpness As Single = CSng(TrackBar1.Value / 100) ' no change in brightness
[code].....