How can I find out the length of particular row of array?
Label1.Text = array.Length
This shows the length of whole array.
e.g. 30
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
I would like to get the length of 0 row.
0 1 2 3 4 5 6 7 8 9
I have an array in my application and I don't know how many values there will be in the array because it gets the data from a webpage. Filling the array with information from the webpage works except for the length, it always returns 999. This is my
dim Array() as string
Array = GBA(source, "<b>", "</b>")
Count = Ubound(Array)
How can I find out the length of my array?
I have a problem when debugging a code. On top of class I declare an array, and the length of array is an integer variable which is applied value below declaration of array.
E.g. class declaration
Dim array1 (2, integer) as string
Public Sub
integer = 5
End Sub
So basically, array is created with integer being 0 or whatever, because it is declared before integer was assigned a value. But the problem is, I need it to be declared at class variable so I can use array in different subs.
initialize an indefinite (eg. Decimal) array without setting boundaries on the array length?
View 2 Repliesbest way to sort an array of doubles into a lowest to highest array of the same length.
View 10 Repliesgiven the following Sub, how would I initialize byte array 'temp'to zeros and give it the length of the incoming byte array passed into the subroutine?
Sub ReceivePacket(ByVal buffer As Byte())
Dim temp() As Byte 'initialize to zeros and length of buffer
temp = buffer.Skip(17).ToArray()
End Sub
I am working on a code that should capture the color of a pixel in a bitmap and then check if the 8 surrounding pixels have the same color. If the checked surrounding pixel HAS NOT the same color it will be ignored, otherwise if it HAS the same color, it should check for its own 8 surrounding pixels and so on.
To do that, I have created an array that starts with a single entry (the x,y coordinates of the initial pixel). So, when a pixel with the same color is found it is pushed to the end of the array. I used a for each loop supposing that VB would keep looping until the end of my array - and since it is growing, the last position of the array would be always pushed until I have not more pixels to be checked.
The problem is that VB is not respecting it, and is considering my array as if it had just 1 entry. Seems that it catch the size of the array when it enters the loop, and regardless the fact I have pushed new items to the array it doesnt keep looping it.
How can I force VB to update the end of array position while looping it? Although I think it wouldnt be necessary, here it goes the code I have so far...
Code:
[Code]...
This adds 1 and 2 to list. My question is why does the first element in the 2d array determines the length of an array and if we want to get the length 2nd index then what will be the method for that?
I need to go line by line through a text file as well as a listbox and remove lines over x amount of characters as well as adding the number of skipped lines to a label. I am trying to use a listbox in this example but it is not working correctly. What I am I doing wrong? First it will only remove an item when it is highlighted (focused) how can I make it so that is not required?[code]...
View 7 RepliesAnyone can give the coding for finding the longest & average length?(displayed in a messagebox)
View 1 RepliesI just need to know how to find the length of one side of a triangle and one angle aswell. I will always know the other two sides in length and one angle. I have enclosed a diagram.
I need to know length of C and the angle as shown.
The length of the previous words is exactly the same but the "truth length" it is not. I want to know if there is any way to find the truth length of a text string with different fonts The reason why I want the "truth length" is I want to make an rss scroll bar and when the first label "hiding all" in the right to send the next rss it in the left.
View 2 RepliesI just don't understand why (intValues.Length - 1) is used: to be precise why the ( - 1 ) is there?
Dim intValues(25) as integer
For intCount = 0 to (intValues.Length -1)
MessageBox.show (intValues(intCount).ToString())
Next
how to combine two 1-D arrays of the same length into one 2-D array ?
View 7 RepliesI am new to VB.NET but used to write a lot of code in VB 6.
How do i declare a variable length array in VB.NET?
In VB6, i would just put:
Dim sArrayList() As String
But when I do that in VB.NET, it highlights my array name and says "unused local variable". What do I need to do to get it to work without an error?
I want to determine size/length of an array that is, how many elements are in my 1 dimen array, can't seem to find the right method that works.
View 9 RepliesI'm trying to call the GetInterfaceInfo Windows API - it accepts a structure as one of its parameters and this structure has a member that is an array. The API populates the contents of the array when it is called and there can be any number of items in the array. How can I define such an array in my structure?
If I just use a normal .NET array like so then the program just crashes (no exception thrown)
<StructLayoutAttribute(LayoutKind.Sequential)> _
Public Structure IP_INTERFACE_INFO
Public NumAdapters As Integer
[Code]...
and this works fine, but the problem is I have to define the SizeConst attribute as you can see to something large (64 in this example) so that the API doesnt fail because the array wasnt big enough. Firstly this is a waste of memory as in most cases the number of items the API sticks in the array will be less than 10, but secondly if there was ever a case where the API wanted to put more than 64 items in then it would fail.
Using ReDim to set the length of the array at runtime seems to have no effect, and that SizeConst attribute has to be set to a constant value so there's no way I can dynamically set it.
i am writing a program "serial over TCP/ip " every thing is fine but my problem is that when a data received from a client i get "System. ArgumentException:Offset and length were out of bounds for the array or count is greater than the number of elements from index to the end of the source collection." what i realy want is to write 9 bytes from the clint received data to the serial port then read 19 bytes from the serial port to send to the client even if this error ocures the program still works fine and the interface between the serial port over the network also works fine, but i don't want this msg to view that the my code .[code]
View 4 RepliesThe obvious first thought is:
Public Function CheckStrings(ByVal input As String()) As Boolean
For Each s As String In input
If s.Length > 0 Then Return True
Next
Return False
End Function
I'm sure there is a simpler way than that though. At least simpler in terms of the code if not necessarily the performance.
Here's my final code:
<Extension()> _
Public Function AnyNonZero(ByVal value As String()) As Boolean
If Not value.All(Function(x) String.IsNullOrEmpty(x)) Then Return True
Return False
End Function
Coming from a C# background, I have no idea why the following declarationr returns an array with length = 2
Dim lTestArray(1) As String
Console.WriteLine(lTestArray.Length) (writes 2)
My program gets an encrpyted query string ,decrypts it and then pulls the pdfs in a popup window depending on the values in the string. The issue I am having is I have around 500 ids that I am passing whose pdfs need to be generated, but I keep getting the "Invalid length for a Base-64 char array".
Not sure what I need to do, I have read through the solutions and have done whatever has been said, with replacing the blank with the "+" but I cannot get this to work.
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
_CurrentProcName = "Page_Load"
[Code].....
Given a byte array of length 100..I would like to find a function that returns a byte array starting at index 15 and containing the next 20 bytes.
View 4 RepliesI have a piece of code written in Visual Basic:
Dim n As Double, i As Integer
n = 4
Dim Ramp_length(1 To 4) As Double
For i = 1 To n
Ramp_length(i) = Cells(13 + i, 5)
'Cells(65 + i, 7) = Ramp_length(i)'
Next i
Is there a way I can reproduce the result without declaring the array with a "fixed" length? I eventually want the code to read off a column of data with unknown length and store it in an array of equal or smaller length so it can be altered.
I have 2 arrays X(n) and Y(n). I would like to pass them between subroutines:
Sub sub1()
...
call sub2(X,Y)[code]...
The problem comes when n can be changed in sub1 say a textbox. How do you transfer an array of variable length between subroutines?
I have a problem to make the comparison from char to string array using Naive Algorithm in vb.net.[code]The problem is the system cannot compare the input from s1 to compare with s2.
View 15 Replieshow to split a string into an array based on it's length?Say if I want the length to be 350 then every 350 chars in a textbox will be split into an array like [code]
View 14 RepliesStructure Tinnings
Dim bowler As String
Dim ball() As tballs
End Structure
[code].....
how can i now define the length of the array ball() in Tinnings structure to 6, (its a cricket program, with 6 runs in an over).
I am trying to program the hamming code in vb... theoretically i understand and know how to do everything, first problem I've encountered is dynamic arrays in vb.net ... is it possible to determine the length of an array from the number of items entered in it, since I have no means of figuring out an exact number or length prior to several mathematical function which outcome will be the data .. directly saved to the array !!
View 4 RepliesI have the following statement: ReDim lsDataMergeStart(lsDataMergeRange.Length)When I follow the execution in the immediate window, I get the following results: lsDataMergeRangeLength =1 lsDataMergeStart = 2 Why?
I need to seperate a name into 2 parts using split the first part being 2 letters "That was easy" but the last part of the name would have an unknown lenght. so how do I get the unknown length? I believe I understand the Join Part here is what I have but it only works when you know the lenght of the name
Project Notes
'Form has two textboxes and one button
'first text box holds a first and last name
' 1-seperate the first and last name into 2 variables
[code]....