I have a problem to make the comparison from char to string array using Naive Algorithm in vb.net.[code]The problem is the system cannot compare the input from s1 to compare with s2.
View 15 Replieshow to split a string into an array based on it's length?Say if I want the length to be 350 then every 350 chars in a textbox will be split into an array like [code]
View 14 RepliesI have a long string like this
dim LongString as String = "123abc456def789ghi"
And I want to split it into a string array. Each element of the array should be in 3 characters length[code]...
How can I write and read a string array to a text file?
View 2 RepliesI would like to format output to a property of a custom control I have made.For instance I have a literal control in my control and when populated I want to check if it is longer than 30 characters long, if so, then go to the next space (as to not cut the word off) after the 30th character and place a <br /> tag in to place the next 30 characters on the next line.So if there were 100 characters in a string, there would be 3 line breaks in the label.I have the looping worked out to get the label populated but cannot get how to dymaically create the array based on the string lenth property and index of method.
View 7 RepliesI have a string:
0E0100000000000000000003CB7352
I need to be able to look at Offset 14 and Length is 1B. I need to be able to look at bit 0 - bit 5. I have NO idea how to read data like this so I wish I could be more specific but I can't. Can someone tell me how to read the specific bits and translate them? I have no idea how to google this. So if someone wants to point me to a search pattern. That would be awesome too.
Here is a chart that describes the bits:
bit 0 : Light LED (head) status, 0: OFF, 1: ON
bit 1 : IR-Radar power status. 0: OFF, 1: ON
bit 2 : IR-Radar detector status: 0: fine, 1: barrier detected.
bit 3-5: Charger staus
0x00 : nothing happen
0x01 : charging completed.
0x02 : in charging
0x04 : something wrong, error occur.
bit 6,7: undefined, do not use.
this is not working?
[Code]...
End WhileI am trying to read from the ": " to the end of the line. I keep getting this error: Index and length must refer to a location within the string. Parameter name: length
am getting the above exception while swaping Items in the list(lstRoutePriority).PFB my code
if (lstRoutePriority.SelectedIndex > 0)
{
//Swap the two items
[Code].....
Dim Phone as string = "478-742-4050 478-256-6550"
If _Phone.Length > 25 Then
_Phone = IsNull(ReturnValue.Substring(0, 25).ToString, "")
End If
Return _Phone
Error: "Index and length must refer to a location within the string. Parameter name: length"
Can I save an array into my .bin file then read the array again just like a string or Integer??
View 2 RepliesI'm trying to read a byte array into a string however it's array is filling up from a dll in the following format. [Code] now its decoding the first byte but I think because of the next [0] it's not completing the whole array. This is the code that I'm using:
Radiotext = System.Text.Encoding.ASCII.GetString(szRetRDS)
I did think about writing it into another byte array excluding the [0] but unsure how I would go about this.
I got this error and I don't know what should I do. Index and length must refer to a location within the string. Parameter name: length That's the line that i get the error on:
[Code]...
"Index and length must refer to a location within the string. Parameter name: length" whenever I run this code
[Code]...
If using the following in an if statement I get an error: If trg.Name.Substring(4, 6).ToUpper <> ("ABCDEF") Then I get the error: "Index and length must refer to a location within the string. Parameter name: length"
I assume this is because the string (trg.name) is too small for the 4, 6 substring. What would be the correct method of working around this problem? VB.net Studio 2008.
I'm working on a vb.net project, when I execute the project I get the following error message: "error message: index and length must refer to a location within the string"
Public Sub New(ByVal lineIn As String)
parent = Trim(lineIn.Substring(0, colStarts(1)))
enfant = Trim(lineIn.Substring(colStarts(1), colStarts(2) - colStarts(1)))
des_F = Trim(lineIn.Substring(colStarts(2), colStarts(3) - colStarts(2)))
[Code]...
I get the error msg in the line marked bold. When i checked the input file, the length of all the fields looks fine. I dont understand the cause of this error.
initialize an indefinite (eg. Decimal) array without setting boundaries on the array length?
View 2 RepliesHow would I copy/convert a string containing an ascii representation of hex values in to a byte array containing the actual hex values? For example, I have a variable containing the hex values delimited by spaces (I can change the delimiter):
[Code]...
best way to sort an array of doubles into a lowest to highest array of the same length.
View 10 RepliesWhat exactly does this line do?
i = stream.Read(bytes, 0, bytes.Length)
Does it read the entire message string sent by the client? I have a line to write to the stream later in the code and that does not seem to be sending anything back to the client, although the code around is excuting.
i = stream.Read(bytes, 0, bytes.Length)
While (i <> 0)
Try
' Translate data bytes to a ASCII string.
[code].....
I'm trying to read the binary data from a binary file with the code below but the it's return the value in the byte array. How can i read the binary data from the binary file and then convert the data into string?This is how i create the binary file.
Dim fs As New FileStream(Application.StartupPath & "Agency.dat", FileMode.OpenOrCreate)
Dim bf As New BinaryFormatter()
Call bf.Serialize(fs, GAgency)[code]....
I'm trying to get a string from a byte array previously read from memory
i can get the string like this
dim mem as string= ASCIIEncoding.ASCII.GetString(memory) or dim mem as string= UTF8Encoding.UTF8.GetString(memory) but when i try to concatenate this with another string i get a strange result dim result as string = "this is you memory string " & mem & " problem string" no matter what comes after mem in the concatenation it seems like it is not there when in fact it is because when i try this (mem has two chars in it) dim result as string = "this is you memory string " & mem(0) & mem(1) & " problem string" problem string appears so what i assume is that there are some vbCrLf chars in the string after reading (or is it from the conversion?)
given the following Sub, how would I initialize byte array 'temp'to zeros and give it the length of the incoming byte array passed into the subroutine?
Sub ReceivePacket(ByVal buffer As Byte())
Dim temp() As Byte 'initialize to zeros and length of buffer
temp = buffer.Skip(17).ToArray()
End Sub
I am working on a code that should capture the color of a pixel in a bitmap and then check if the 8 surrounding pixels have the same color. If the checked surrounding pixel HAS NOT the same color it will be ignored, otherwise if it HAS the same color, it should check for its own 8 surrounding pixels and so on.
To do that, I have created an array that starts with a single entry (the x,y coordinates of the initial pixel). So, when a pixel with the same color is found it is pushed to the end of the array. I used a for each loop supposing that VB would keep looping until the end of my array - and since it is growing, the last position of the array would be always pushed until I have not more pixels to be checked.
The problem is that VB is not respecting it, and is considering my array as if it had just 1 entry. Seems that it catch the size of the array when it enters the loop, and regardless the fact I have pushed new items to the array it doesnt keep looping it.
How can I force VB to update the end of array position while looping it? Although I think it wouldnt be necessary, here it goes the code I have so far...
Code:
[Code]...
This adds 1 and 2 to list. My question is why does the first element in the 2d array determines the length of an array and if we want to get the length 2nd index then what will be the method for that?
I've got myself a CSV file with the following contents:
1,The Compact,1.8GHz,1024MB,160GB,440
2,The Medium,2.4GHz,1024MB,180GB,500
3,The Workhorse,2.4GHz,2048MB,220GB,650
It's a list of computer systems, basically, that the user can purchase.I need to read this file, line-by-line, into an array. Let's call this array csvline().The first line of the text file would stored in csvline(0). Line two would be stored in csvline(1). And so on. (I've started with zero because that's where VB starts its arrays). A drop-down list would then enable the user to select 1, 2 or 3 (or however many lines/systems are stored in the file). Upon selecting a number - say, 1 - csvline(0) would be displayed inside a textbox (textbox1, let's say). If 2 was selected, csvline(1) would be displayed, and so on.
It's not the formatting I need help with, though; that's the easy part. I just need someone to help teach me how to read a CSV file line-by-line, putting each line into a string array - csvlines(count) - then increment count by one so that the next line is read into another slot.So far, I've been able to paste the numbers of each system into an combobox:
Using csvfileparser As New Microsoft.VisualBasic.FileIO.TextFieldParser _
("F:folderprogramnameprogramnameinDebugsystems.csv")
Dim csvalue As String()[code]......
But this only selects individual values. I need to figure out how selecting one of these numbers in the combobox can trigger textbox1 to be appended with just that line (I can handle the formatting, using the string.format stuff). If I try to do this using csvalue = csvtranslator.ReadLine , I get the following error message:
"Error 1 Value of type 'String' cannot be converted to '1-dimensional array of String'."
If I then put it as an array, ie: csvalue() = csvtranslator.ReadLine , I then get a different error message:"Error 1 Number of indices is less than the number of dimensions of the indexed array."
Structure systemstructure
Dim number As Byte
Dim name As String[code]............
when i transfer the bytes sent by the client program to a string the string length is affected.when i put the bytes sent by the client program to a message box. it returns the corrrect text. but when i check the length it will return 8192 or higher. but the actual size is just 5.
My Code
Dim tcpClient As TcpClient = tcpListener.AcceptTcpClient()
RichTextBox1.Text = RichTextBox1.Text & vbNewLine & "Connection accepted."
' Get the stream[code]....
I would like to be able to use any of the .csv lines and collum.my csv file has 6 collums (Name,LastName,Street,City,Zip,Phone)d about 100 lineso I want to be able to call in my project something like Array(10,2) and it will be line 10 collum 2 and it will give me the data (Hilton) or what ever in there
View 2 RepliesI've a text file which has some data written. Records have Starting character as "#2" and Ending character as "#3" in ASCII respectively and the file includes series of records, but not written as Line by Line. The difficulty I'm having is, to how to transfer those data's into a database. The File comes a 7mb file and looping character by character then noting down the Record Starting Character and Record ending Character, and finally substring them is not feasible as it take more time and makes the computer slower. I would like to know is there any easy way to transfer them?
View 3 RepliesI'm making a card game and the first thing I'm doing for it is generating a random card. I used an array for the cards (can't think of a better way to assign a picturebox to a card picture other then a huge select case block). I'm trying to split the 2D array into two parts but it doesn't work.
My current
vb
Public Class frmMain
Private Function Flop() 'First three common cards to be displayed.
[Code].....
I looked around online and I don't think a list will work for my 2-dimensional array.
i have a string array that i want to output to a text file. the array size is 10000. i fill the array starting from 0 with some strings. at the end, i only want to show the array from index 256 to the last array that is not empty (for eg. if the array is filled with data from 0 to 2000, i only want the text file to show the data from 256 to 2000 and ignore the remaining strings). Is there any function to do this?t i use is shown below
Dim myArray(10000) as string
Dim strArray As New System.IO.StreamWriter("c:List.txt")
strArray.WriteLine("{0,10}{1,30}", "Index", "Symbol")
[code].....