VS 2008 - Datasets - UPDATE Command ?
Mar 3, 2011
I'm not sure if this belongs in the database section or the NET section. I will leave that up to the moderators. I have converted a few of my VB6 systems to NET. However, I have retained the ADO coding technique. I probably need to update that. Below is a sample from one of my applications. As you can see, I retrieve the data and, based on conditions, I then issue an UPDATE command. From what I have been reading (and not really grasping) a DATASET/DATA ADAPTER combination will do the same thing. If so, could somebody rewrite this small block of code using "proper" ADO.NET techniques. If I see my own code rewritten it will be much more meaningful to me.
Dim cnxn As New SqlClient.SqlConnection(cnxnstring)
cnxn.Open()
Dim sql As New SqlClient.SqlCommand
sql.CommandText = "SELECT * FROM PART WHERE LTRIM(RTRIM([PARTNUMBER])) = " & "'" & Trim
[CODE]...
View 5 Replies
ADVERTISEMENT
Oct 15, 2009
This is for visual basic 2008 express edition.Ive been trying to update records from the table of my memrec.dbml and dbase1DataSet.xsd in the visual basic environment.Im not using any sql database server but Im just using the built-in sql server within the visual basic 2008 express.I was able to add records and retreived it to display in the textboxes.My 1st block of codes I used to edit records has an error message which says:NotSupportedException was unhandled - Sql server does not handle comparison of NText, Text, Xml, or Image data types.
My 2nd block of codes I tried to used doesn't have any error and it ables to change the records while at runtime but when you exit the program the changes was not save at all cause when you run it again the records that were changed during runtime goes back to its original records.Let me take you a look at the two blocks of codes
[Code]...
Questions:
1.What do you see as possible cause for having an error in 1st block of codes?What's the remedy for that?
2.For the 2nd block of codes,what is the valid update command to be added in the line in order to save the changes not just during runtime but until you exit the program and run it again?
View 2 Replies
Jan 28, 2009
I can't figure out how to update a field in a MySQL db using MySQL Connector Net 5.2.5. Can anyone show an example code?
View 2 Replies
Jun 2, 2011
I've been having a problem adding a record to an Access database using datasets and da.update etc. I'm trying to create a simple program that displays the records of a database table in a series of text boxes. I've managed to get my next and previous buttons working correctly and my update button works correctly too. The problem occurs when I try to add a new record. I keep getting a "Syntax error in INSERT INTO statement" whenever I click my add button.
[Code]...
View 5 Replies
Sep 28, 2009
I have an issue with a data base updating it won't update for me in debgging mode it is stopping here on this bit of code which is highlighted in red. the error which comes up is .(update requires a valid update command when passed datarow collection with modified rows.)
Public Sub UpdateDataSource(ByVal ChangedRows As database.dataset1)
Try
'The data source only needs to be updated if there are changes pending.
If (Not (ChangedRows) Is Nothing) Then
[CODE]...
View 1 Replies
May 25, 2010
I have been on a database project for a while now. I wanted to be able to make changes to my database using the update command of a Datagridview control.However, I have been faced with a series of unsuccessful outcomes.I want to do this how do I go about it?
[Code]...
View 9 Replies
Jun 12, 2011
Here's my code
Dim suppQuery As String = "SELECT [Supplier ID],[Company],[Last Name],[First Name],[Email Address],[Mobile Phone],[Office Phone],[Address],[City],[ZIP/Postal Code],[Notes] FROM [Suppliers]"
Dim dsSupp As New DataSet
Dim daSupp As New OleDbDataAdapter(suppQuery, cnPharma)
[CODE]...
It errors on the da.Update line and by the way if it helps, the text fields are a product of datarowview. that is when you select an item on the listbox the details of that appears on the text fields. and my goal is i could edit those text fields and save them.
View 2 Replies
Jan 27, 2010
We know:"UPDATE tt SET Points=" & iPoints & " WHERE Ref='" & sRef & "'"Can we update several records using UPDATE command at one time?
View 4 Replies
May 29, 2009
I am completly flummoxed!!! I have writen code for updating my table from a form but when I use the same code only changing the table names it wont work I get the following message: "Update requires a valid Update Command when passed DataRow collection with modified rows" My codes are as follows:
[Code]...
View 5 Replies
Feb 11, 2010
is there a way to update a database row with the update command by first defining all parameters and then all values just like you can in the insert command? "insert into table1 (parameter1,parameter2,....) values (value1, value2,....)"something like "set table1 (parameter1, parameter2) values (value1,value 2,...) where ...."?because I only know the syntax to define each parameters value "set table parameter1=value, parameter2=value2... where"
View 8 Replies
Sep 4, 2009
I need to very quickly write an exe system on a laptop where when the laptops are connected to the network they read a database table and store the data locally, so staff can use the laptop while they roam.The laptops have quite small capacity and the company would prefer not to use SQL Express or Access.
My question is, can the data initially be downloaded into the exe application via a dataadapter and dataset, and will that dataset the retain the downloaded data, or will I need to ensure the dataset is written to an XML file and then loaded/unloaded each time the laptop application is started while the staff are travelling ?
View 2 Replies
May 23, 2010
I am novice at best with VB. I have a dataset built from a complex query. Well I have a lot more items in the dataset than I wish to show in a datagridview. Some items will be used for other purposes at the time, filling txt boxes, dropdowns, etc...all independent of the dgv. I am lost at how to fill just a 3 or 4 of the items rather than just filling the entire thing. So, instead of just filling the entire ds into the grid, how would I fill in selected columns into the datagrid that has specifically named columns at runtime?
View 2 Replies
Mar 22, 2010
I have added a column to a table in SQL Server Express - the table is already included in my VB Express Dataset. However on clicking "Refresh" on the table in Database Exlorer I do not see the new column in the Database Explorer listings. I have looked around a bit for a solution to this but cannot find anything under Google.
View 10 Replies
Oct 6, 2010
I set up SQL Server 2008 loaded VS2008 and all the ODBC drivers.All ODBC connections for DS and DGV's and using connection strings. I managed to get the connections working when I tested this on a new program.When I copy all the files from my other computer and try to view this it works with the connection string and connects to SQL server fine.But with the dgv I see nothing. Yet if I preview the datasets I get the result I am expecting
View 3 Replies
Mar 21, 2011
My program is doing good when I suddenly bumped into this problem.I dont know how to do the next functionality that I need to accomplish.I am done with inserting values, showing the gridview etc and it works great. Now my problem is the update command.
I have 2 tables
table:tblDest
Fields:
destLastName
destFname
[Code]...
View 4 Replies
Jun 12, 2009
i am writing a code where the user will update the staff,but my update command has some problems. i think its the comma's in my command,
[Code]...
View 3 Replies
Apr 5, 2009
Whilst playing around with DataGridViews in VS I've accumalated quite a few TestDataSets within my project.
Can someone please tell me the correct way of removing these cleanly? At the moment I've been Right Clicking a DataSet (from within Solution Explorer) and either clicking 'Delete' or 'Exclude From Project'
Doing this throws up Errors in the Error list such as;
TestDataSet is not defined
TestDataSetTableAdapters is not defined
TestDataSet is not defined
TestDatasetTableAdapters is not defined
I then double click each error in turn which takes me to the actual code with the error and delete this.
I have quite a lot of TestDataSets and I'm hoping there is another way to do this much cleaner.
View 4 Replies
Mar 24, 2009
I�m fetching data from an access db, filtered by date and an ID. The data is then charted on a form (form1).
I want to be able to "duplicate" the form so that the data that is shown on form1 is shown on a different form. That forms data is not supposed to change when I change the data on the first form.
So far I�ve put som code in a contextmenustrip that opens another form1, but the chart is not showing on that form at all.
I'm thinking that I'm going about this the wrong way so I thought I'd ask you guys what you think I should do?
A little info: When Form1 opens up, it loops through selected dates in a listbox, querying each date. This takes a little time, so I decided to put the data in a dataset on form_load, and then do the drawing from the dataset on form_paint, thus not having to query the database each time the form needs repainting. why the second (or third, fourth etc) form1 doesn�t display the chart?
View 2 Replies
Apr 27, 2011
I am trying to update a column in my database with the date selected from a control on my ASP.NET web page. I need to ensure that the code is correct because nothing is updating in the column.
Code:
Command = New SqlCommand("UPDATE Parking SET ParkingStartDate = @StartDate1 WHERE Parking_ID = @radio)", myConn)
Command.Parameters.Add("@StartDate1", SqlDbType.Date).Value = StartDate.SelectedDate
Command.Parameters.Add("@radio", SqlDbType.VarChar).Value = radio
Command.ExecuteNonQuery()
myConn.Close()
if the column is already NULL, is it correct to use the update statement?
View 1 Replies
Jan 16, 2009
I have this code that works for adding a record.
Dim da As New OleDbDataAdapter("SELECT TrainingTitle, TrainingDate, TrainingInstructor, TrainingDescription FROM tblTrainingHistory", TRAININGcn)
Dim ds As New DataSet
da.FillSchema(ds, SchemaType.Source, "tblTrainingHistory")
da.Fill(ds, "tblTrainingHistory")
[Code]...
But I wanted to show the autonumber to the user for reference. How do I know what the autonumber is?
View 2 Replies
Apr 30, 2011
i Have a SqlDataBase in Which It Have Three Fields Namely **" mc , amount , customername Now I am Update this Fileds Using Upadte command In vb.net Form now Wat I Need is I Want To Add This New Value While Updating With the Previous Value
[Code]...
View 1 Replies
Dec 13, 2011
I am using VB 2005 and the following code returns an error: No value given for one or more parameters. I swear I've done this before without any problems but I can't find my original code.[code]I tested the value of oldid which is set earlier and it does have a value.
View 2 Replies
Mar 11, 2010
I have been using examples from the textbook creating a OleDbDataAdapter using the wizard, everything works fine loading the data into the dataset, but when i try to update the dataset, it doesn't save tod the database, can someone please tell me what im doing wrong: I created the data adapter and dataset using the wizard, I binded all applicable textboxes. I do not get any errors the update command just doesn't save to the Access Database.
This is my code
Imports System
Imports System.IO
[code].....
View 3 Replies
May 13, 2010
I have an application that uses an access database to fill datasets. My problem is that I have three related tables, when I add a new users to the customers table The parts table fills with data saved in the database with a cust_id of -1.
I discovered that this is caused by adding a part, not saving it and deleting the customer. I Can add code to stop the user from deleting a customer that has parts but I do not have access to the live database to delete the record that are incorrect.
Is there something I can do to delete the rows that have an id of -1 on the load statment?
View 1 Replies
Jul 28, 2010
So this is my code... most of it autogenerated... i have created a database, and one table and i stucked trying to update items in table...
Here is the code:
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
[Code]....
View 1 Replies
May 7, 2011
I am trying to update my app via the msi file via command promt for testing, later I will be using Process.Start and setting the arguments. Right now I can get this to work: >msiexec.exe /i <path to msi> /passive ' which requires a UAC prompt, but works with one small window - /qn or /quiet do not work >msiexec.exe /a <path to msi> /passive ' starts the process and then drops with no install So the question is how do I setup the arguments to do a silent install?
View 5 Replies
Aug 27, 2009
I am using VB 2008 Express, connected to a MS Access database for some reason my update command is not updating my database.i may have something wrong [code]whats wierd is when i change UpdateCommand to SelectCommand, it will update the database, but it makes other things in my program malfuncation, so i cant have that as SelectCommand, there must be a way to have it all work with the Updatecommand ..
View 4 Replies
May 31, 2012
I have a GridView with ItemTemplate. I am trying to approve and reject booking using ImageButton but I do not know where and how to put the sql command to update booking status.I need hints to continue my coding.
Here is my ItemTemplate for Accept and Reject imagebutton:
<asp:TemplateField HeaderText="Action">
<ItemTemplate>
<asp:ImageButton runat="server" ID="acceptBooking"
ImageUrl="~/images/accept.png"
OnClientClick="if (!window.confirm('Are you sure you want to accept this booking?')) return false;" />
</ItemTemplate>
[Code]...
View 1 Replies
Apr 19, 2011
im trying to add a new record to my DB and im gettin an error on updating the row to my DB De instructie INSERT bevat een syntaxisfout.If you have anny questions or want to have alook at the full application, i can send you all of the code i have...
dsNewRow = ds.Tables("tblWijn").NewRow()
dsNewRow.Item("BWNr") = CInt(txtBWNr.Text)
dsNewRow.Item("Soort") = cboSoort.Text
[code]....
View 6 Replies
Dec 5, 2011
In my application, I have a call for an update to a table on my database. I know that it is executing because I get a 1 returned when checking the number of rows affected but when I look on the DB the value is not updated - I have refreshed and still no update. Here is the code, taskgrp_template is type bit and taskgrp_id is type integer. Id is also set to the correct value, as the result of my tracepoint - results listed below code.
mycmd.CommandText = "UPDATE p2_taskgroups SET TASKGRP_template = 1 WHERE TASKGRP_ID =" & id
rowsChecked = mycmd.ExecuteNonQuery()
Tracepoint result: the value of id is 55 and the value of templateCheck is 14 the number of rows affected was 1
View 1 Replies
